Categories

Best Stainless Steel Flanged End

15 Amp Flanged Inlet, TOVEN 125V RV Shore Power Inlet NEMA 5-15 Plug RV Receptacle with Waterproof Integrated 18\ Extension Cord & Cover Marine Electrical Inlet ETL Approved

  • ...nlet Is a generator or battery charger plug to energize your several electrical devices and electrical appliances at the same time. Widely used in the RV, trailer, camper, car, boat, marine, block heater, home, recessed outlet box, etc.
  • 【Easy Installation】: The flanged power inlet needs 1-3 / 4" hole size, use 4 stainless steel screws (package Include) to firmly fix the straight blade flange entrance on the wall. The male receptacle was equipped with 14AWG 18 inch extension cable. Just need to plug in to connect the power..
  • 【The Wire Up As You Wish】: Choose the length and diameter of the cord based on your need. The Flanged electrical inlet receptacle accommodates 12-18 AWG gauge wires suitable for No. 12-3 through No. 18-3 cords grip..
Check Stock

M10-1.5 x 50mm Flanged Hex Head Bolts Flange Hexagon Screws, Stainless Steel 18-8 (304), Plain Finish, DIN 6921, 5 PCS

  • High quality Grade A2-70 Stainless Steel 18-8 (304) provides strength and offers good corrosion resistance in many environments..
  • Flange bolts have a flange on the bottom of the head that distributes the load like a washer..
  • Thread Diameter 10 mm, Thread Size 1.5 mm (M10), Screw Length 50 mm..
  • Flanged Bolts are great to have around for use in wood and wet environments..
Check Stock

WELLUCK 15 Amp Flanged Inlet 125V, NEMA 5-15 RV Shore Power Inlet Plug w/Waterproof and Back Cover, 2 Pole 3-Wire AC Port Plug, Generator Male Receptacle for Marine Boat RV Shed Electrical Extension

  • 【15 Amp Flanged Inlet】: No oxidation for the Nickel coated copper pole on the plug, made of premium copper and Nylon plastic to avoid the damage of UV degradation and chemicals, rugged and durable for indoor and outdoor..
  • 【Easy Reliable Installation】: 2" Hole size required, clear see-thru wiring block (Black-Hot, Green-Ground, Silver-Neutral), and 4 long Stainless Steel screws will fix straight blade flanged inlet on the hole or wall more tightly. No gap on the edge!.
  • 【 Weatherproof Cover】: ETL approved, and the flanged power inlet cap and back cover will protect it from the rain storm, snows, dust and even works well in Western Colorado winters, without crack and leak..
  • 【Wire Up As You Wish】 : Define the Length and Diameter of the cord based on actual need. Flanged electrical inlet receptacle accommodates 12-18 AWG gauge wires, suitable for No. 12-3 through No. 18-3 cords grip..
  • 【Widely Compatible】: As a generator or battery charger plug to energize your electrical devices. Widely used in trailer, camper, RV, car, boat, marine, block heater,home, bumper, recessed outlet box, etc.
Check Stock

Sintron 15 Amp Flanged Inlet 125V, NEMA 5-15P Shore Power Inlet Receptacle, Generator AC Port Electric Plug 1875W, Weatherproof Cover Recessed Male Outlet, ETL Listed, Straight Blade 2 Pole 3 Wire

  • ✅【CERTIFICATION: ETL】ETL listed. Safety and quality are highly valued at Sintron products, the Sintron 15 Amp flanged inlet receptacle is compliance to North American safety standards..
  • ✅【WIDE APPLICATION】This shore power plug widely used in RVs, campers, cars, trailers, boats, ships, marine heaters, houses, bumpers, embedded socket boxes, etc., not only as generators or battery charger plugs, but also for power your electronic devices..
  • ✅【WEATHERPROOF】Built to withstand harsh environments for the straight blade power inlet has a NEMA Type-3R enclosure rating ensuring superior protection against rain, sleet and damage from external ice formations..
  • ✅【RELIABLE & DURABLE】Sintron's commercial/industrial grade flanged wiring device with nylon dead-front construction and thermoplastic wiring module is available in 15A version and feature heavy duty construction for many years of service life..
  • ✅【EASY TO INSTALL】2" hole size, clear see-thru wiring block (Black-Hot, Green-Ground, Silver-Neutral), and 4 free Stainless Steel screws to help you more firmly fix straight blade flanged inlet receptacle on the hole or wall fast..
Check Stock

15 Amp Flanged Inlet, TOVEN 125V RV Shore Power Inlet NEMA 5-15 Plug RV Receptacle with Waterproof Cover Marine Electrical 15A Cord Cover Power Inlet, ETL Approved

  • 【15 Amp Flanged Inlet】: This NEMA 5-15 15 amp inlet 125V is ETL certified, The material is premium copper and black nylon plastic. None oxidation for the copper pole on the plug. It can avoid ultraviolet degradation and Rain erosion. It is very sturdy and durable, which can work perfectly both indoor and outdoor.
  • 【 Weatherproof Design】: Our 15 amp inlet is ETL approved, which has the saftest quality. The newest weatherproof design back cover will protect it from rainstorms, snow, dust and even works well without crack and leak in the cold winters..
  • 【Easy Installation】: The flanged power inlet needs 1-3 / 4" hole size, use 4 stainless steel screws (package Include) to firmly fix the straight blade flange entrance on the wall..
  • 【The Wire Up As You Wish】: Choose the length and diameter of the cord based on your need. The Flanged electrical inlet receptacle accommodates 12-18 AWG gauge wires suitable for No. 12-3 through No. 18-3 cords grip..
  • 【Widely Compatible】: This shore power inlet Is a generator or battery charger plug to energize your several electrical devices and electrical appliances at the same time. Widely used in the RV, trailer, camper, car, boat, marine, block heater, home, recessed outlet box, etc.
Check Stock

Henny Penny Seat Gasket

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

MJR Tumblers 20 LB Rock Tumbler Awarded Best High End, Most Versatile Run 19 Dif Barrel Combinations

  • Heavy duty 16 gauge welded steel frame, powder coated to be scratch and corrosion resistant.
  • Rubber coated 1/2" diameter steel rollers.
  • Industrial duty flanged STAINLESS STEEL BALL BEARINGS (no plastic sleeve bearings to wear out).
  • Heavy duty motor with automatic thermo overload protection - intended for continuous use.
  • Commercial grade plastic barrel that seals to be water and air tight, tapered neck for easy loading and unloading.
Check Stock

MJR Tumblers 20 LB Rock Tumbler Awarded Best High End, Most Versatile Run 19 Dif Barrel Combinations

  • Heavy duty 16 gauge welded steel frame, powder coated to be scratch and corrosion resistant.
  • Rubber coated 1/2" diameter steel rollers.
  • Industrial duty flanged STAINLESS STEEL BALL BEARINGS (no plastic sleeve bearings to wear out).
  • Heavy duty motor with automatic thermo overload protection - intended for continuous use.
  • Commercial grade plastic barrel that seals to be water and air tight, tapered neck for easy loading and unloading.
Check Stock

MJR Tumblers 18 LB Rock Tumbler Awarded Best High End, Most Versatile Run 19 Dif Barrel Combinations

  • Heavy duty 16 gauge welded steel frame, powder coated to be scratch and corrosion resistant.
  • Rubber coated 1/2" diameter steel rollers.
  • Industrial duty flanged STAINLESS STEEL BALL BEARINGS (no plastic sleeve bearings to wear out).
  • Heavy duty motor with automatic thermo overload protection - intended for continuous use.
  • Commercial grade plastic barrel that seals to be water and air tight, tapered neck for easy loading and unloading.
Check Stock

MJR Tumblers 10 LB Rock Tumbler Awarded Best High End, Most Versatile Run 4 Dif Barrel Combinations

  • Heavy duty 16 gauge welded steel frame, powder coated to be scratch and corrosion resistant.
  • Rubber coated 3/8" diameter steel rollers.
  • Industrial duty flanged STAINLESS STEEL BALL BEARINGS (no plastic sleeve bearings to wear out).
  • Heavy duty motor with automatic thermo overload protection - intended for continuous use.
  • Commercial grade plastic barrel that seals to be water and air tight, tapered neck for easy loading and unloading.
Check Stock

MJR Tumblers 25 LB Rock Tumbler Awarded Best High End, Most Versatile Run 19 Dif Barrel Combinations

  • Heavy duty 16 gauge welded steel frame, powder coated to be scratch and corrosion resistant.
  • Rubber coated 1/2" diameter steel rollers.
  • Industrial duty flanged STAINLESS STEEL BALL BEARINGS (no plastic sleeve bearings to wear out).
  • Heavy duty motor with automatic thermo overload protection - intended for continuous use.
  • Commercial grade plastic barrel that seals to be water and air tight, tapered neck for easy loading and unloading.
Check Stock

MJR Tumblers 40 LB Rock Tumbler Awarded Best High End, Most Versatile Run 19 Dif Barrel Combinations

  • Heavy duty 16 gauge welded steel frame, powder coated to be scratch and corrosion resistant.
  • Rubber coated 1/2" diameter steel rollers.
  • Industrial duty flanged STAINLESS STEEL BALL BEARINGS (no plastic sleeve bearings to wear out).
  • Heavy duty motor with automatic thermo overload protection - intended for continuous use.
  • Commercial grade plastic barrel that seals to be water and air tight, tapered neck for easy loading and unloading.
Check Stock

Oggi Toilet Bowl Plunger, Silver, Black

  • Elevated construction to allow plunger to dry.
Check Stock