mistcooling 250 PSI Misting Pump

  • 250 psi pump quiet operation 35Db solenoid valve – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter th....
Check Stock

LOHNER Shower Heads with Handheld,ON/OFF Switch,87 Inch Hose,Luxurious Stainless Steel 8'' Shower head,6 Settings Handheld,with 11\ Adjustable Shower Arm (Square Shower Set)

  • 【Shower Head with handheld】8 inch stainless steel rainfall shower head.
  • 5 settings handheld shower with ON/OFF Switch.
  • 87 inch stainless steel flexible shower hose.
  • gasket, installation manual and 2year warranty.
  • 【Rainfall Shower Head High Pressure】8*8 inch rainfall square shower head made of 304 stainless steel, absolutely rust-proof and durable, rotating ball interface design, you can adjust to any angle you want, the shower tool will definitely provide you with a hotel-style shower experience..
  • 【Handheld Shower with ON/OFF Switch】Its nozzle adopt TPR and High level ABS. 5 mode shower mode and 87 inch Long shower hose make you more convenient.Added button function, It allows you to temporarily turn off the water flow, keep water temperature what you want. Be easy to use and save water, which brings you great convenience..
  • 【Shower Extender Arm】Solid Brass Heavy Duty Extension Arm. 180 Degrees Height and Angle Adjustable. Fits ANY Shower Head or Hand Shower. 2-foot Vertical Movement Range. Fits any standard shower..
  • 【Professional technology 】The combination of ultra-thin and air-in technology leads to strong and high pressure, opt....
Check Stock

HFS-25 1\/dn25 Flow Switch,Liquid Water Flow Paddle Control Switch SPDT Contacts 6-380V

  • This flow switch is made of high quality stainless steel, corrosion resistant and long service life..
  • This product is used to measure the fluid dynamics of fluids passing through pipes, such as water, ethylene diluents, glycols and other liquids that do not corrode copper..
  • This water flow switch is suitable for water treatment systems, central air conditioning, water cooling units, fire protection systems and other fields..
  • Flow switches are typically used in locations that require interlocking or "cut" protection..
  • When the flow exceeds the set value, the fluid drives the blade and the microswitch, and the SPDT contact can connect the circuit and disconnect other circuits..
Check Stock

mistcooling 24\ OSC Misting Fan Kit - High Pressure - (3 Fan)

  • 24 Inch Fans 1500 PSI Misting Pump Six Nozzle Stainless Steel Misting Fan Ring 25 Ft High Pressure Flexible Tubing Stainless Steel Misting Nozzles Stainless Steel ¼ Inch Clamps Easy to Install DIY Install.
  • Misting Pump Features : Maximum Pump Speed (0.15/ 0.30 gpm.): 1800 RPM Maximum Inlet Pressure: 100 PSI Minimum Inlet Pressure: (Based on setting on Pressure switch) or Flooded if Pressure switch is bypassed Maximum Outlet Pressure: 1500PSI Maximum Flow: 0.15 GPM, 0.30 GPM (Refer to manufacturing label on pump) Full load Amps. (0.15/ 0.30 gpm.): 1.38 Amps. /2.15 Amps Voltage: 110V/ 220V AC (Refer manufacturing label on the pump) Noise Level: 75 DB. Maximum Fluid Temperature: For Room Tem.
  • Outdoor Fan Features : "Size: 24” Color: White RPM: 1110, AMPS: 2.65, CFM:9100 3 speed Pull chain Stainless Steel hardware with Durable Corrosion resistant finish Motor with thermal Overlade protection industrial Grade aluminum blade 10 Ft Heavy Duty cord with cord wrap Quiet operation For indoor/ Outdoor Use Osha Approved Grill ".
  • Stainless Steel Ring Features Made with Industrial Grade 3/8'' Rigid Stainless Steel 316 Compatible with all High and Mid Pressure Mist Pumps Pre-threaded nozzle slots for 10/24 Thread Rated for up to 2000PSI Attaches to any wall mount, ....
Check Stock

AMRM-4505-7 Attwood Sahara Automatic Bilge Pump - 500 GPH

  • The Attwood Sahara Bilge Pump is a durable, compact, and easy to install automatic bilge pump. The Sahara has everything contained in one compact yet durable package, making this pump a great option for tight spaces. This series of bilge pump features a 316 stainless steel motor shaft for corrosion resistance and a durable high-impact, glass-filled polyester impeller. The base of the pump has quick, one-handed removal for easy disassembly for cleaning..
  • Pumps include 36" lengths of 16-gauge caulked and tinned copper wire. An automatic-switch bilge pump is a requirement for any vessels 20’ especially those that accommodate overnight passengers and crew. All Attwood bilge pumps come with a 3 year manufacturer's warranty..
  • Mercury-free switch. Test knob for easy operational check Non-restrictive float movement. Larger filter area resists clogging.
  • Free flow of water around housing keeps motor cool. 316 Stainless Steel motor shaft for saltwater corrosion resistance. Durable high-impact, glass-filled polyester impeller.
  • Sahara S500 Part #: AMRA-4505-7, GPH at Open Flow: 500, GPH at 3.3' Head: 350, Hose Size: 3/4" I.D..
Check Stock

TRUSTMI Toilet Concealed Hot and Cold Bidet Spray Set,Brushed Nickel

  • Toilet In Wall Mount Hot and Cold Bidet Sprayer Set, Brushed Nickel.
  • Premium 304 Stainless Steel Brushed Nickel Hand Held Bidet Sprayer Head, Rear Push Down Pop Up Temporary Switch. 2 Function Flow (Soft and Jet), Switch by Turning Bidet Sprayer Head Nozzle.
  • Standard G 1/2" Connector Brass Concealed Hot&Cold Rough-in Mixer Valve with Holder Combination.
  • 47 inch Stainless Steel Hose with EPDM+NYLON Inner, Can bear 170-250psi Water Pressure.
  • Handheld Sprayer Complete Set Use as Bidet Attachment, Also as Cloth Diaper Sprayer, Cleaning, Rinsing..
Check Stock

uxcell DC130V 10W 1.2-12L/min 8mm Two Wires Magnetic Type Water Flow Switch Flow Counter

  • Light weight, small size, easy to install.Hall element is imported, water-proof design to prevent water ingress,The inside of the impeller is inlaid with a stainless steel shaft and is always wear-resistant..
  • All materials are in line with SGS testing standards..
  • The water flow sensor is applied for water heater, and can be used as flow switch..
Check Stock

Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

  • Head: 4.0M, Wire Lead: 1M, Outlet Dia: 29mm(1-1/8"), Dimension: 5.92“*4.21"/150.5mm*107mm..
  • 【Switch】Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
  • 【Long life motor】 :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • 【Durable】: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
  • 【Fast Speed】When water level rises,pump can turn on bout 1 1/2 inch when it’s sitting in the bottom of the bilge at the back of the boat. It definitely pumps the water out fast! 5 Gallons underneath motor and the pump spit it out in about 20 seconds..
Check Stock

Water Pump Flow Switch, 1 PCS HT-30 AC 0-110V 0.2A G3/4\-3/4\ Thread Water Pump Flow Sensor Switch, Water Flow Control Switch Sensor

  • MAGNETIC CONTROL: This G1/2 water flow switch uses water flow magnetic control device and on-off control sensing elements, so as to switch on or off pump..
  • HIGH TEMPERATURE RESISTANT: High temperature resistant material is used to make sure that the flow switch can be used in hot and cold water. The maximum temperature can reach 70C°..
  • STABLE PERFORMANCE: Induction chamber, magnetic control chamber and electronic components are designed separately in order to avoid switch failure caused by iron matter in pipeline is magnetic adsorbed..
  • LOW WATER PRESSURE STARTUP: Reset spring is made of high quality stainless steel.
  • it can start up pump when water pressure is 003e0.03KG. Water Pressure:.
  • SAFETY ENSURED: The electronic components as control device will not cause spark during work which is quite safe..
Check Stock

Acquaer 1HP Shallow/Deep Well Jet Pump, Cast Iron Convertible Pump with Ejector Kit, Well Depth Up to 25ft or 90ft, 115V/230V Dual Voltage, Automatic Pressure Switch

  • SUBMERSIBLE DEEP WELL PUMP: 4 inch submersible deep well pump is recommended for homes, cottages and farms for installation in water wells which are 4 inch and larger in diameter with a maximum pumping depth of 180 feet. Control box included..
  • DEEP WELL PUMP: Built-in check valve prevents backflow and ensures system pressure. built-in suction screen and precision machined stainless steel impellers and diffusers for long life..
  • ALL STAINLESS STEEL WELL PUMP: Made of non corrosive 316 stainless steel material. Every component in this deep well pump including the impellers are made of stainless steel..
  • NON CORROSIVE CONSTRUCTION: 1-1/4" NPT Stainless Steel discharge head provides full-flow performance without the risk of corrosion..
  • PERFORMANCE: Moves up to 890 gallons per hour with a maximum pumping depth of 180 feet. Best efficiency is between 73 and 123 feet (with a 20/40 PSI pressure switch) or 50 to 100 feet (with a 30/50 pressure switch)..
Check Stock

High Pressure Shower Heads, 2NLF Handheld Turbo Fan Shower Head, Double Outlet Panel Propeller Hydro Jet Shower Head with Pause Switch, Turbocharged Vortex Shower head with hose and base

  • Double Outlet Panel ReplacementThe 2NLF handheld propeller shower head has two panel to replace. The Mirror stainless steel panel can support powerful hydro jet and unique magic water flow shape, to clean up residual soap bubbles in seconds. The rear panel produces normal high pressure water flow. You can change the panel within 3 minutes as you need. Using any one of the panels are no need to scrub hard and damage the skin, provides you a spa shower time..
  • Turbo Charged & Water Saving DesignAdopts a unique internal structure and air-in technology so that it can provide powerful water flow even at low water flow and low pressure. Thanks to 88 specially designed water outlets and revolutionary micro nozzle technology. The water pressure per unit time is sufficient, but the water volume is reduced by 50%..
  • Easy InstallationNo need to call a plumber. Just connect it to any G1/2 threaded shower hose, suitable for most hoses and brackets or shower attachment arms. 2NLF turbo fan shower head complicable with common shower hook. Also, every part can be easily removed and cleaned..
  • High Quality MaterialsThe 2NLF vortex shower head use environmentally friendly durable ABS material and mirror stainless steel panel. In the meanwhile, we conducted more than 4000 op....
Check Stock

Shower Head Shut Off Valve, 304 Stainless Steel Mini Ball Valve NPT Thread(1/2\),Shower Head Flow Control Valve

  • Strong and sturdy:The shower switch valve is made of high-quality 304 stainless steel, which is more sturdy and durable for copper and plastic ball valves.It is recommended to wrap tape on the threads to better control the position of the ball valve on the hand shower and prevent water leakage.
  • Standard connection: 1/2 inch standard connection, NPT female and male, suitable for shower connectors in the United States,which also widely used at home, bathroom, kitchen, Motorhome, etc..
  • Function: The purpose of this stainless steel on-off valve is to conveniently control or close the water flow, even if your hands are full of foam or you are washing your hair. The water flow can be easily closed or reduced, thereby saving water..
  • Easy to use: The long stainless steel handle rotates a quarter turn to easily control the amount of water..
  • Good after-sales service: If you have any questions, please contact us for a refund or replacement..
Check Stock

HT-800 G1 Thread 220V Magnetic Wate Flow Sensor Switch Pipe Boosting Pump Laser Machine Automatic Electronic Switch Control for Shower Low Water Pressure Solar Heater Water Circulation

  • Automatic Control --- This water flow switch uses water flow magnetic control device and on-off control sensing elements, so as to achieve automatic control and switch on or off booster pump.
  • Stable Performance --- induction chamber, magnetic control chamber and electronic components are designed separately in order to avoid switch failure caused by iron matter in pipeline is magnetic adsorbed.
  • High Temperature Resistant --- gains materials allows the product to be used for both hot(up to 70) and cold water.
  • High Sensitivity --- low water pressure startup, return spring is made of high quality stainless steel.
  • it can start up pump when water pressure is 003e0.03KG.
  • Safe and convenient to use --- water flow switch with G1 thread brass connector, convenient to install.
  • electronic components are used as the control devices to make the product no spark and completely enclosed in the work.
Check Stock