Categories

Best Stainless Steel Hydraulic Fittings

TrackStar Turnigy 13.5T Sensored Brushless Motor 3040KV Roar Approved

  • Premium Material: The hydraulic steering helm comes with high-strength aluminum alloy material, which is lightweight, anti-aging, corrosion-resistant,....
  • Optimal Hose Fitting: The adjustable stainless steel O-ring fittings will simplify the installation process and allow for simple reorientation after....
  • Considerate Details: The hydraulic helm pump is equipped with the replaceable shaft seal, the built-in lock valve, relieve valve, and air pocket.....
  • Complete Accessories: The hydraulic steering pump has a complete accessories kit for durable structure. It includes ball bearing piston race,-5 ORB....
  • Wide Application: This outboard helm pump is suitable for boats rated to a maximum of 300 HP. It can be used in mechanical/manual steering for yachts,....
Check Stock

OKBA 64pcs JIC 37° Flare Thread Cap&Plug Kit,37 Degree JIC Cap and Plug Assortment Kit Precision Threading Hydraulic Hose Tube Pipe Adapter AN Fittings Set Kit Dash Sizes 04 06 08 10 12 16

  • 64 PCS hydraulic JIC cap & plug fittings kit,AN assortment hydraulic fitting set,also known as "AN" 37 degree flare JIC caps and plugs. The JIC 37° flare thread cap & plug can be easily installation to seal hydraulic hoses, tubes, and pipes.
  • A must have for hydraulic lines: hydraulic JIC plug and cap cap kit works great for hydraulic repairs.The JIC cap and plug are sealed quickly keep hydraulics lines from fluid leaking when remove fluids hydraulic application/machinery work/ truck/chemical processing systems.
  • The hydraulic adapter fittings set are made by carbon steel to withstand high pressure applications and high heat fuel delivery and fluid power applications. The jic cap and plug kit fittings have precision threading to make sure install smoothly and resist corrosion.
  • Packed in a plastic carring storage box case and with size chart with thread sizes,keeps all 37° JIC caps & plug fitting organized with dash sizes: 04, 06, 08, 10, 12,16.
  • Package including:#4 (7/16-20) JIC caps&plugs---each 10PCS| #6 (9/16-18)caps&plugs ---each 8PCS| #8 (3/4-16)caps&plugs---each 6PCS| #10 (7/8-14)caps&plugs---each 4PCS| #12 (1 1/16-12) caps&plugs---each 2PCS| #16 (1 5/16-12) caps&plugs---each 2PCS.
Check Stock

PRO BAT Braided Hydraulic Brake Hose Line Pipeline For Chinese GY6 Scooter ATV Dirt Bike Go Kart 10mm Banjo Ends (70''/175cm)

  • 70"/175mm Hydraulic Brake Oil Line ATV Quad Go Kart Scooter Cable Hose With 10mm Banjo Ends.
  • 70" long --from top to end ,10mm banjo nut fittings.
  • Made with high quality heavy duty braided stainless steel.
  • Hydraulic Brake Master Cylinder Hose Line Pipeline.
Check Stock

Zhhcyyds Bleed Kit & Filler Kit Compatible with Seastar Hydraulic Steering Systems Leak Free Brass Helm Fitting Rust Free Quick Connect Professional Bleed Kit for Seastar Hydraulic Steering Systems.

  • [Leak Free]The threaded brass fittings will not cross thread which ensures no leaking or mess making when you are bleeding your Seastar hydraulic....
  • [Rust Free]All of the metal within the Seastar bleed kit is brass and stainless steel preventing rust. This ensures everlasting quality even in marine....
  • [Function]Used to replenish oil for the ship's steering system fluid. Let professional ship repairers save more time in the oil change process, the....
  • [Easy To Use]The quick connect fittings make bleeding your hydraulics system an effortless task by eliminating the need to screw in both threaded ends....
  • [Best Present]Help you fill and bleed your hydraulic steering system, a simple but professional DIY tool for add fluid/oil and bleed the air out.....
Check Stock

QLOUNI 80Pcs 7-21mm 304 Stainless Steel Single Ear Stepless Hose Clamps with Clamp Crimper Tool Kit,For Water Pipe, Plumbing, Automotive and Mechanical Application

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping performance, offering 10 Tons compressive force, more labor-saving, and crimping pipes in seconds..
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This hydraulic copper tube fittings crimper meets your various demand fast for pipe maintenance and repair..
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an integral hydraulic pipe crimping tool with a standard manual hydraulic pump..
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic pipe tube crimping tool will release pressure automatically when reaching the max pressure..
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied in electric power, traffic, petroleum, chemical engineering, mining, metallurgy, and shipbuilding areas..
Check Stock

Jet/Powermatic 7015-211 Retaining Ring

  • Made of high quality material, wear-resistant, strong and durable..
  • Great for sump plugs, water, fuel and hydraulic fittings and Suitable for faucets, cylinders, valves, pumps, automobiles, bearings.
  • .C Clip External Circlips Snap Retaining Rings Set Stainless Steel M3 4 5 6 8 9 10 11 12 -75mm Washers Circlips For Shaft.
Check Stock

VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System

  • ... hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
  • Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
  • Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
  • Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
  • Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offshore fishing, bass boats, flat boats, and many more..
Check Stock

Mophorn Helm Outboard Hydraulic Steering Pump 300 HP Hydraulic Pump HH5271-3 for Cruisers Runabouts Boats

  • ...nes up to 300 HP (600 HP combined for counter rotating twins) for speeds up to 60 MPH. 4.9 turns lock-to-lock in most typical single cylinder outboard applications..
  • Shaft Seal & ORB Fitting: The pump has a shaft seal that can be easily replaced, this is a user-friendly design for your use. And the positionable stainless steel O-Ring (ORB) fittings for easy hose routing..
  • Built-in Two-way Lock: The hydraulic helm pump is equipped with the replaceable shaft seal, built-in lock valve, relieve valve, and air pocket. These details make it convenient for you to use..
  • Sturdy Aluminum Alloy: The hydraulic steering helm is made from a high-strength aluminum alloy material, which is corrosion-resistant, and high-density to effectively prevent seawater erosion. Constant seasonal replacements will no longer be a worry. Enjoy the steering helm for years to come..
Check Stock

Winibo ZA0350 Marine Hydraulic Outboard Steering Kit for Outboard up to 300HP with Helm Pump Compact Cylinder Tubing Others

  • Outboard Hydraulic Steering Kit Universally Fit Outboards up to 300HP.
  • Single or dual Station Steering For Boats Rated To a Maximum of 600HP (Total).
  • built-in lock valve to prevent the steering load from feeding back, also includes a relief valve provides over-pressure protection.
  • Adjustable O-ring seal fittings simplify the installation process and allow for simple reorientation of the fittings after installation.
  • made in high class stainless steel, aluminum alloy and copper， Kevlar reinforced Tubing.
Check Stock

64 Pcs JIC 37° Flare Thread Cap & Plug Assortment Kit Seal Adapter Set for Hydraulic Hose Tube and Pipe SAE AN Fittings Galvanized Carbon Steel with Precision Threading Dash Sizes 4 6 8 10 12 16

  • SUPERIOR PERFORMANCE: AquaAulos hydraulic fittings are made to the highest standards, with our JIC cap and plug kit meeting or exceeding SAE J514 conventions. These industrial heavy-duty JIC fittings are made from premium carbon steel galvanized with robust and long-lasting zinc, which prevents rust, corrosion, and degradation, even with extended use. Over time these fittings are exposed to hose fluid, so this durability is essential. You can trust our products like any leading brands, such as Parker, Eaton Aeroquip, or Gates, as they have been rigorously tested and meet the industry standards for pressure, temperature, and material strength!.
  • PRECISION-ENGINEERED: We understand the importance of heavy-duty craftsmanship, which is exactly what we strive for in every piece in this kit. Our state-of-the-art CNC machine provides ultra-precise production, ensuring that the caps and plugs are made with fine-tolerance thread with good sealing for easy, repeated installation and removal. This extra attention to the manufacturing process enhances the adapter's performance. It provides customers with a competitive advantage through less downtime and extended equipment life, leading to increased revenues and reduced warranty costs..
Check Stock

RIDGID 20483 Standard Series XL-C/S Press Ring Kit For RIDGID ProPress Tools, Hydraulic Crimping Tools

  • Patented ring design to make pressed connections for 2-1/2 inch to 4 inch copper couplings or stainless steel tube pipe fittings.
  • Connect to the tubing at nearly any angle to allow greater access in tight spaces with the XL-C Rings and V2 Actuator Jaw patented 180 degrees swiveling feature.
  • Designed in conjunction with the ProPress XL-C fittings, ensuring total system compatibility.
  • ProPress tools expand the capability of your hydraulic crimping tool and are compatible only with RIDGID Standard Series pressing tools (CT-400, 320-E, RP 330-B, RP 330-C, or RP 340)..
  • V2 Actuator Jaw features new jaw identification clips, to quickly and easily label and identify the appropriate pressing jaw.
Check Stock

Uniweld UEK1 Hydraulic Swage Tool Kit

  • Kit includes: 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1-1/8″ O.D. Expander Heads, Inside/Outside Deburring Tool and Carrying Case with Storage Compartments..
  • Hydraulic power to easily make precision swages from 3/8″ to 1-5/8″ O.D. on soft tubing including copper, brass, aluminum and steel. Expander Heads 1-3/8″ and 1-5/8″ O.D. Sold Separately..
  • Compact pistol grip design able to work in tight spaces and the hydraulic lever mechanism and release button allow for quick and easy one-handed swage..
  • All tubing must be soft or fully annealed to prevent cracking, see product video on how to properly anneal tubing..
  • Save time and money by eliminating fittings, soldering joints, re-round deformed tubes and fittings for precision fit..
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • ...ostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We offer 3-month after-sale service for the 6an 3/8 fuel hose fittings kit. Any problem you have, contact us directly by amazon message. Please Noted: Professional installation and Adjustable AN Wrench is highly recommended.
Check Stock