Categories

Best Stainless Steel Membrane Valve

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check Stock

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

  • [Professional Factory]We are a manufacturer specializing in aquarium co2 systems. Our co2 generator for aquarium plants is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high pressure resistant.
  • [Safety First]Automatic pressure relief valve, when the pressure of the inside co2 steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
  • [Refine The Bubbles]Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • [Low Cost]You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
  • [Complete Accessories]Steel bottle, Stainless steel pressur....
Check Stock

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

  • Professional Factory - We are a manufacturer specializing in aquarium co2 systems. Our co2 generator for aquarium plants is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high pressure resistant.
  • High Capacity and Safe First - You could add more material: Citric acid 400g + baking soda 400 + water 600g. The capacity is twice that of an ordinary 2L bottle and half of 4L! An automatic pressure relief valve, when the pressure of the inside steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
  • Refine The Bubbles - Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • Low Cost - You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
  • Complete Accessories - steel bottle, Stainless steel pressure reducing....
Check Stock

CKAuto 4 Pieces TR416 Metal Valve Stems Outer Mount Fits .453\ & .625\ Rim Holes Long 1 1/2\

  • 【Package Information】You will receive 4 pieces of stainless steel valve stem extensions and 6 pieces of brass valve stem extenders in the package. Sufficient quantities can meet your daily use and replacement needs..
  • 【Reliable and Durable】Made of copper nut and stainless steel braided, the valve stem extensions are sturdy and solid, which can be used for the long term. The precise weaving technology protects the inside of the product from damage..
  • 【Universal Connector】This valve stem tool can fit 99% of the valve cores and air pumps of car models, and you can apply them on most cars with standard American tire valves, like RVs, bicycles, motorcycles, trucks etc..
  • 【Size Details】The stainless steel value stem extension equips two lengths, one approx. 7 inches and another 12 inches. And there are 3 different angles in the tire valve extension adaptor, 45 degrees, 90 degrees and 135 degrees..
  • 【Easy Installment】First screw the metal valve stem extender on your tire valve, then connect the hose to the tire inlet through the valve stem extension to inflate the tire. The right angle bend allows easy access for the pump. Easy operation..
Check Stock

VEVOR Shower Curb Kit, 38\x60\ ABS Watertight Shower Curb Overlay with 4\ ABS Offset Bonding Flange, 4\ Stainless Steel Grate and Trowel, Cuttable Shower Curb, Shower Pan Fit for Bathroom

  • ...hower base kit. Small roll size: 5 in × 32.8 ft(12.7 cm × 10 m). Large roll size: 3.3 ft × 32.8 ft(1 m × 10 m). You are allowed to choose the membrane for different areas of the wall or floor. For your quick use, 4 inside corners and 2 outside corners of the membrane are provided without time-consuming cutting..
  • Stainless Steel Trowel: We give you an excellent square-toothed stainless steel trowel for mortar brushing, which is not provided by other products. This trowel is solid and non-deformed. The trowel blade features square-serrated to keep the mortar on the surface uneven, enhancing the adhesion between the membrane and the wall or floor..
  • Effortless Installation: Install a shower bed kit is not difficult and won’t cost you a long time. It contains all the water-impermeable components, including the shower tray, flange, stainless steel drain, membrane, and shower curb, required to create a non-maintenance, watertight shower assembly. You should use an unmodified thin set to install it. Our product is a good choice for your water-impermeable bathroom..
Check Stock

Shower head Shut Off Valve ,Water Flow Control Valve,Stainless Steel Valve NPT Thread(1/2\ Female X 1/2\ Male)

  • All parts of shower flower control valve are made of high-quality stainless steel, (stainless steel body, stainless steel handle, stainless steel ball) stronger and more corrosion resistant than brass and plastic..
  • The stainless steel water flow control valve is designed with a single lever. It can be turned on and off by only turning 90 degrees. Even if the hand is full of foam, the water flow can be easily adjusted and closed..
  • The 1/2" standard NPT thread can match most shower pipes and shower heads in the United States..
  • This stainless steel ball valve can be installed on hand showers, shower hoses, and pipes. Widely used in at home, bathroom, kitchen, RV, etc..
  • Good after-sales service: If you have any questions, please contact us for a refund or replacement..
Check Stock

VEVOR Shower Curb Kit, 38\x60\ ABS Watertight Shower Curb Overlay with 4\ ABS Central Bonding Flange, 4\ Stainless Steel Grate and Trowel, Cuttable Shower Curb, Shower Pan Fit for Bathroom

  • ...hower base kit. Small roll size: 5 in × 32.8 ft(12.7 cm × 10 m). Large roll size: 3.3 ft × 32.8 ft(1 m × 10 m). You are allowed to choose the membrane for different areas of the wall or floor. For your quick use, 4 inside corners and 2 outside corners of the membrane are provided without time-consuming cutting..
  • Stainless Steel Trowel: We give you an excellent square-toothed stainless steel trowel for mortar brushing, which is not provided by other products. This trowel is solid and non-deformed. The trowel blade features square-serrated to keep the mortar on the surface uneven, enhancing the adhesion between the membrane and the wall or floor..
  • Effortless Installation: Install a shower bed kit is not difficult and won’t cost you a long time. It contains all the water-impermeable components, including the shower tray, flange, stainless steel drain, membrane, and shower curb, required to create a non-maintenance, watertight shower assembly. You should use an unmodified thin set to install it. Our product is a good choice for your water-impermeable bathroom..
Check Stock

Showerhead Shut Off Valve with Stainless Handle 304 Stainless Steel Mini Ball Valve 1/2 Female X Male NPT Thread Water Flow Control Valve Regulator Chrome Shower Head Flow Control Valve 1

  • FITMENTS: 1/2'' standard connections, NPT- female and male, compatible with the most common showerhead connectors in the North America..
  • FUNCTIONS: This stainless steel ball valve use as showerhead shut off valve, RV shower shut off valve or water saving adjustable valve, which also widely used at home, bathroom, kitchen, RV, Motorhome, etc..
  • RELIABLE & LEAKPROOF: This shower shut off made by one piece construction and has a blow-out proof stem to reduce leakage and valve damage. The maximum operating temperature of this shower on off valve is 325 degrees F..
  • DURABLE MATERIAL: This shower head shut off valve made of 304 stainless steel body and ball with much higher performance (high heat-resistance, high corrosion resistance and pressure-resistance), more durable and harder than the ordinary Brass and Plastic one. Stainless steel valve cartridge can be operated up to 250 000 times switching cycles..
  • EASY TO USE: A long stainless handle and on/ off switch with quarter are designed on this shower shut off valve, which made the nozzle easy to turn and control the water flow easily!.
Check Stock

VEVOR Shower Curb Kit 38\ x 60\ Watertight Shower Curb Overlay with 4\ PVC Offset Bonding Flange, 4\ Stainless Steel Grate, 2 Cuttable Shower Curb and Trowel, Shower Pan Slope Sticks Fit for Bathroom

  • ...hower base kit. Small roll size: 5 in × 32.8 ft(12.7 cm × 10 m). Large roll size: 3.3 ft × 32.8 ft(1 m × 10 m). You are allowed to choose the membrane for different areas of the wall or floor. For your quick use, 4 inside corners and 2 outside corners of the membrane are provided without time-consuming cutting..
  • Stainless Steel Trowel: We give you an excellent square-toothed stainless steel trowel for mortar brushing, which is not provided by other products. This trowel is solid and non-deformed. The trowel blade features square-serrated to keep the mortar on the surface uneven, enhancing the adhesion between the membrane and the wall or floor..
  • Effortless Installation: Install a shower bed kit is not difficult and won’t cost you a long time. It contains all the water-impermeable components, including the shower tray, flange, stainless steel drain, membrane, and shower curb, required to create a non-maintenance, watertight shower assembly. You should use an unmodified thin set to install it. Our product is a good choice for your water-impermeable bathroom..
Check Stock

VEVOR Shower Curb Kit, 48\x72\ Watertight Shower Curb Overlay with 4\ ABS Central Bonding Flange, 4\ Stainless Steel Grate, 2 Cuttable Shower Curb and Trowel, Shower Pan Slope Sticks Fit for Bathroom

  • ...hower base kit. Small roll size: 5 in × 32.8 ft(12.7 cm × 10 m). Large roll size: 3.3 ft × 32.8 ft(1 m × 10 m). You are allowed to choose the membrane for different areas of the wall or floor. For your quick use, 4 inside corners and 2 outside corners of the membrane are provided without time-consuming cutting..
  • Stainless Steel Trowel: We give you an excellent square-toothed stainless steel trowel for mortar brushing, which is not provided by other products. This trowel is solid and non-deformed. The trowel blade features square-serrated to keep the mortar on the surface uneven, enhancing the adhesion between the membrane and the wall or floor..
  • Effortless Installation: Install a shower bed kit is not difficult and won’t cost you a long time. It contains all the water-impermeable components, including the shower tray, flange, stainless steel drain, membrane, and shower curb, required to create a non-maintenance, watertight shower assembly. You should use an unmodified thin set to install it. Our product is a good choice for your water-impermeable bathroom..
Check Stock

VEVOR Shower Curb Kit, 48\x48\ Watertight Shower Curb Overlay with 4\ ABS Central Bonding Flange, 4\ Stainless Steel Grate, 2 Cuttable Shower Curb and Trowel, Shower Pan Slope Sticks Fit for Bathroom

  • ...hower base kit. Small roll size: 5 in × 32.8 ft(12.7 cm × 10 m). Large roll size: 3.3 ft × 32.8 ft(1 m × 10 m). You are allowed to choose the membrane for different areas of the wall or floor. For your quick use, 4 inside corners and 2 outside corners of the membrane are provided without time-consuming cutting..
  • Stainless Steel Trowel: We give you an excellent square-toothed stainless steel trowel for mortar brushing, which is not provided by other products. This trowel is solid and non-deformed. The trowel blade features square-serrated to keep the mortar on the surface uneven, enhancing the adhesion between the membrane and the wall or floor..
  • Effortless Installation: Install a shower bed kit is not difficult and won’t cost you a long time. It contains all the water-impermeable components, including the shower tray, flange, stainless steel drain, membrane, and shower curb, required to create a non-maintenance, watertight shower assembly. You should use an unmodified thin set to install it. Our product is a good choice for your water-impermeable bathroom..
Check Stock

MTM Hydro Ball Valve for Pressure Washer Gun, High Pressure Power Washer Shut Off Valve Stainless Steel 3/8” Female NPT 5000 PSI

  • PRESSURE WASHING BALL VALVE - Premium 3/8” Stainless Steel Ball Valve for pressure washer guns. 5000 PSI Max Pressure rating. Max Temp 250 degrees Fahrenheit..
  • STAINLESS STEEL - Ball valve pressure washer made from stainless steel, offering enhanced rust and corrosion resistance. Durable pressure washer accessories built for long-term use..
  • EASY SWITCHING - Power washing valve commonly found at the base of the high pressure washer gun. Enables quick shut off to switch between pressure washing guns without turning off the entire system..
  • HIGH QUALITY SEALS - High pressure ball valve with high quality PTFE (Polytetrafluoroethylene) seals for improved performance with high heat and chemicals..
  • LIGHTWEIGHT - Pressure washer shut off valve made from lightweight materials with a rounded frame. 3/8" Female NPT Inlet x 3/8" Female NPT Outlet..
Check Stock

Aquarium CO2 Check Valve, Stainless Steel Needle Check Valve Bubble Counter Aquariums System CO2 Regulator Fish Tank Accessory(Single Head Micro metering Valve Bubble Counter)

  • Stainless Steel Needle Micro-metering Valve—This aquarium CO2 check valve adopts high quality stainless steel needle micro-metering valve with high precision, that is easy to release CO2 by fine tuning..
  • Different Styles to Choose—This aquarium CO2 check valve provide many different styles for you to choose, can meeting your different demands..
  • Qualitative Materials—This aquarium CO2 check valve is made of high grade stainless steel material, which is anti-corrosion, abrasion resistant, glossy and durable..
  • Ergonomically Design—This aquarium CO2 check valve adopts ergonomically design, special metal-grinded surface, that is easy to operate..
  • Easy to Install & Remove—This aquarium CO2 check valve adopts simple design, which is easy to install and convenient to remove..
Check Stock