Best Stainless Steel Nozzle
Tool Daily Pressure Washer Nozzle Tips Multiple Degrees, 1/4 inch, 5-Pack (Orifice 3.5)
- ATTENTION: Please see Image 2 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 3.5. The working pressure is up to 4000 PSI..
- Different angle allows you to clean hard-to-reach areas quickly and easily.
- Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles nozzle according to the actual need.
- Don’t use a ladder to clean or sprinkle water for tree with these nozzles..
- More Application: Can be attached to a Quick-Connect Wand for swifter application and more.
Check StockTool Daily Pressure Washer Spray Nozzle Tips Multiple Degrees, 1/4 inch 5-Pack (2.5 GPM)
- ATTENTION: Please see Image 6 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 2.5. Different angle allows you to clean hard-to-reach areas quickly and easily.
- Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles nozzle according to the actual need.
- Don't use a ladder to clean or sprinkle water for tree with these nozzles.
- More Application: Can be attached to a Quick-Connect Wand for swifter application and more.
Check Stock
Pressure Washer Tips Power Washer Soap Nozzle Tips Multiple Degrees 1/4 Quick Connect Design Up to 4,500 PSI 2.5 GPM(5-Pack)
- 【Pressure Washer Nozzle Tips】Pressure up to 4500 PSI, 1/4-inch quick connect, 2.5 orifice size, 2.5GPM, adjusts 5 different cleaning angles..
- 【5 Different Angles】1 Red 0 Degree Nozzle Tip (Stainless Steel), 1 Yellow 15 Degree Nozzle Tip (Stainless Steel), 1 Green 25 Degree Nozzle Tip (Stainless Steel), 1 White 40 Degree Nozzle Tip (Stainless Steel), 1 Black Soap Nozzle (Brass)..
- 【Any Cleaning Area】Cleaning the underside of a mower deck, gutters, gas grill, vehicle, wheel wells, watering garden, and different spray angle allows you to clean hard-to-reach areas quickly and easily..
- 【More Application Choice】Attached to a quick connect pivot coupler and Compatible with all Pressure Washers..
- 【Keep Nozzle Tips Clean and Lubricated】We aim to provide the highest quality service and the best product quality for each customer. Place your order without any worry. If you have any question, we will unconditionally solve for you!.
Check Stock
Pressure Washer Turbo Tip 3000PSI Turbo Nozzle Kit 360° Rotating Presure Washer Turbo Nozzles 1/4'' Quick Connect with 5 Nozzle Tips Kit Multiple Degrees(0, 15, 25, 40,Soap) 3.0 GPM 3.0 Orifice
- 【Powerful Jet of Water】- 1/4" quick connect design, for use with pressure washers up to 3,600 PSI, gallons per minute: 3.0（3 GPM）, nozzle orifice size: 3.0, maximum operating temperature: 114°F. Creates 360° powerful jet of water!.
- 【5 Pressure Washer Tip】- 1 Red 0 Degree Nozzle Tip (Stainless Steel), 1 Yellow 15 Degree Nozzle Tip (Stainless Steel), 1 Green 25 Degree Nozzle Tip (Stainless Steel), 1 White 40 Degree Nozzle Tip (Stainless Steel), 1 Black Soap Nozzle (Brass)..
- 【200% Rotate Speed】- Turbo Tip spin in a circular motion (0 degree nozzle is a straight line)at high speeds to increase both the intensity and cleaning area of the nozzle. There is a ceramic ball inside that spins under pressure and the pattern is circular regardless of nozzle position. Turbo nozzles cleans up to 40% faster than..
- 【Clean Any Area】- The Spray Nozzle is ideal for removing a large amount of dirty.Cleaning of soiled bricks, concrete, vinyl or any other large amount of dirt or heavily soiled areas.It can also strip paint, and it has the ability to damage whatever it comes in contact with..
Check Stock
Orbit 10106H Misting Nozzle
- * Material: A Filter on your mist system, features a sturdy brass body with stainless steel orifice, not rust, durable. Minimal water use of 1/2 gallon of water per hour per nozzle..
- * Thread size: 4mm(diameter)*5mm(length) , Total length 24.8mm. Note : this is a high Pressure mist nozzle, the Operation Pressure is 20-80kg/cm, Flow Rate 80-145ml/min..
- * Wide Appliacations: It can be usually used for a wide range of occasions such as garden, balcony, villa garden sprinkler irrigation.
- Perfect for landscaping, cooling, air humidification, spray disinfection, epidemic prevention, deodorizing air purification..
- * There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be sprayed in network, good for filtering systems ..
- * Item contains 10 pcs Brass Misting Nozzles, Soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage..
Check Stock
Hylaea 20pcs/Pack 0.4mm Orifice Thread 10/24 UNC, Outdoor Brass Misting Nozzles, Brass Fog Mist Nozzles for Greenhouse Garden Landscaping Dust Control and Outdoor Cooling System
- The Brass and Stainless Steel Misting Nozzle is the most efficient and water-conservative mist nozzle available today. It only uses 1/2 gallon per hour per nozzle and features a sturdy brass body with stainless steel orifice. The nozzle requires simple maintenance: just soak periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage. Includes: 5 Misting Nozzles.
- HIGH-QUALITY CONSTRUCTION: Brass and stainless steel nozzles are sturdy and long-lasting..
- WATER EFFICIENT: Cool down without wasting water. These nozzles require minimal water use of 1/2 gallon of water per hour per nozzle..
- COMPATIBLE WITH ORBIT MIST SYSTEMS: Screw into any 10/24 threaded mist nozzle opening..
- PRODUCT SPECIFICATIONS: For outdoor use with cold water only. Do not use in freezing temperatures..
Check Stock40 Pieces 3D Printer Nozzle Cleaning Kit 28 Pieces 0.15 mm 0.25 mm 0.35 mm 0.4 mm 0.5 mm Nozzle Cleaning Needles with Storage Box 8 Pieces Cleaning Copper Wire Toothbrushes 2 Pieces Tweezers
- Package contents: you will receive 28 pieces of stainless steel nozzle cleaning needles in 5 sizes, 2 pieces of storage boxes, 8 pieces of cleaning....
- Various sizes of cleaning needles: these stainless steel nozzle cleaning needles have 5 different sizes, including 12 x 0.4 mm, 10 x 0.35 mm, 2 x 0.5....
- Compatibility: these 3D printer nozzle cleaning accessories are compatible with most 3D printers nozzles, compatible with MK8, MK10, etc., please....
- Quality material: these 3D printer nozzle cleaning needles are made of stainless steel, these wire brushes are made of copper wire, durable and....
- Practical tools: these stainless steel nozzle cleaning needles are good for gentle maintenance of your nozzles and hard-to-reach places, these copper....
Check Stock
7Penn Vertical Meat Stuffer – 3L Sausage Stuffer Machine with Vertical Stuffer Nozzles, Manual Sausage Press Machine
- MANUAL SAUSAGE STUFFER KIT: Easily prepare your own fresh homemade sausages and snack sticks with the 7Penn | Hand Crank Sausage Stuffer Stainless Steel Sausage Casing Machine and Accessories.
- Customize your seasoning and meat blend and use your preferred meat casings to make the perfect domestic or wild game sausages, hotdogs, and rope bratwurst.
- EASILY LOAD AND CLEAN: Summer sausage stuffer cylinder tilts out when compression plate is withdrawn completely.
- 8-inch (20.3cm) tall stainless steel sausage stuffer barrel features a 5.5-inch (14cm) diameter and holds up to 3 liters (7 pounds) of ground meat.
- Piston, nozzle retainer, sausage filler barrel, and plastic sausage stuffer nozzles are removable for easy cleaning.
- VARIOUS SIZED NOZZLES: 4 plastic nozzles are included to allow versatility with your sausage making supplies.
- 15mm (.6 inch) nozzle works well for mini smokies, while the 20mm (.79 inch) nozzle is designed for snack sticks and breakfast sausages.
- Make hotdogs and rope sausage with the 32mm (1.25 inch) nozzle or bologna and pepperoni rings with the 40mm (1.57 inch) nozzle.
- Each 7-inch (17.8cm) long nozzle attaches to your meat sausage stuffer machine with the steel nozzle retainer.
- BUILT TO LAST: Stainless steel gears provide durability and....
Check StockHutdkte Pressure Washer Pump for SRMW22G26-EZ 2.2G24, 2.2 GPM 2600-2800 PSI for TroyBilt Karcher Craftsman Generac Fits Most 7/8' Shaft 4-7 HP Engines with Pressure Washer Nozzle
- This pump head assembly ready for RMW or SRMW pumps- RMW2G20, RMW2.2G24, RMW2G23B, RMW2G24, RMW2.2G20D, SRMW2.2G26, RMV2.5G24..
- Pressure Washer Pump Fits for Troybilt: 1974-2, 1974-0, 1909-0, 1908-2, 1908-0, 1902-1, 1902-0, 1811-0,.
- Pressure Washer Pump also Fits for Troybilt,for Devilbiss/Excell, for Craftsman,for Husky And Others Rated at 2800 PSI and 2.4 GPM with 7/8” shaft 4 - 7 HP engines.
- Center shaft to each mounting bolt is 4" - Center to Center Spacing Between Mounting Bolts is: 7 11/16" – 6 3/16" - 6 7/16 ..
- Package including: 1x 7/8" Shaft Pressure Washer Pump , 1 Black Brass soap nozzle,1 Red Stainless Steel Nozzle Tip (0 Degree),1 Yellow Stainless Steel Nozzle Tip (15 Degree),1 Green Stainless Steel Nozzle Tip (25 Degree),1 White Stainless Steel Nozzle Tip (40 Degree) ..
Check Stock
Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)
- Nozzle Cleaning Kit: you will get 32 MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
- And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
- Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
- Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
- Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....
Check Stock
mistcooling 24\ OSC Misting Fan Kit - High Pressure - (3 Fan)
- 24 Inch Fans 1500 PSI Misting Pump Six Nozzle Stainless Steel Misting Fan Ring 25 Ft High Pressure Flexible Tubing Stainless Steel Misting Nozzles Stainless Steel ¼ Inch Clamps Easy to Install DIY Install.
- Misting Pump Features : Maximum Pump Speed (0.15/ 0.30 gpm.): 1800 RPM Maximum Inlet Pressure: 100 PSI Minimum Inlet Pressure: (Based on setting on Pressure switch) or Flooded if Pressure switch is bypassed Maximum Outlet Pressure: 1500PSI Maximum Flow: 0.15 GPM, 0.30 GPM (Refer to manufacturing label on pump) Full load Amps. (0.15/ 0.30 gpm.): 1.38 Amps. /2.15 Amps Voltage: 110V/ 220V AC (Refer manufacturing label on the pump) Noise Level: 75 DB. Maximum Fluid Temperature: For Room Tem.
- Outdoor Fan Features : "Size: 24” Color: White RPM: 1110, AMPS: 2.65, CFM:9100 3 speed Pull chain Stainless Steel hardware with Durable Corrosion resistant finish Motor with thermal Overlade protection industrial Grade aluminum blade 10 Ft Heavy Duty cord with cord wrap Quiet operation For indoor/ Outdoor Use Osha Approved Grill ".
- Stainless Steel Ring Features Made with Industrial Grade 3/8'' Rigid Stainless Steel 316 Compatible with all High and Mid Pressure Mist Pumps Pre-threaded nozzle slots for 10/24 Thread Rated for up to 2000PSI Attaches to any wall mount, ....
Check Stock32PCS Mk8 Nozzles 3D Printer Extruder Nozzles Hardened Steel Stainless Steel Brass High Temperature Pointed Wear Resistant Nozzle 0.4mm,Compatible with CR-10 Ender 3/ V2 Ender3 pro,Prusa i3
- Value for money: 10 pieces stainless steel nozzles and 16 pieces brass nozzles,5 nozzle cleaning needles,1 Nozzle Spanner,possesses 0.2 mm,0.4....
- High precision: the inner wall of the 3D printer extruder nozzle is smooth and has no burrs, its viscosity coefficient is small, and extruder nozzle....
- Premium material: Our MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material....
- Good performance: this MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be....
- Extensive Compatibility: Outer Thread M6，Input Diameter 1.75mm ,these high temperature pointed wear resistant nozzles are compatible with MK8 hotend....
Check Stock
Hicello Stainless Steel Fountain Nozzle, 3/8\ Pond Sprinkler Spray Head, Adjustable Pond Sprinkler Nozzle, Garden Column Water Spray Head
- 【Excellent Performance】With stainless steel fountain nozzle effect, water and air are suctioned in, mixed intensively and accelerated into the air, forming an impressive soft flowing fountain..
- 【Premium Quality】The pond column water spray head is made of quality stainless steel material, which is corrosion resistant and durable with a long service life..
- 【Scientific Design】The jet angle of stainless steel spiral nozzle is generally 120 degrees with smooth flow paths, which can minimize the liquid blocking so that the liquid reaches the maximum flow..
- 【Wide Application】The pond sprinkler head is widely used in the courtyard, garden, lawn, green belts and another small area of agricultural spray irrigation..
- 【Product Details】The connection size of fountain nozzle: G2/8(DN10, 16mm). Nozzle size: approx. 56mm/2.20inch. Pressure: 30-50Kpa. Amount of water: 5-8 m3/H. Spray height: 0.5-1.0M. Cover the diameter: 1.6-2.0M..
Check Stock
