Categories

Best Stainless Steel Pipe Fittings

Rectorseal 25631 4-Ounce No. 5 Pipe Thread Sealant

  • RECTORSEAL 5 pipe thread sealant multi-purpose, 1/4 pint – R514.
  • Soft set slow drying compound which seals, lubricates and protects threaded pipe and fittings.
  • Can be pressurized immediately for piping up through 2″ and 100 psi for natural gas, air and water only.
  • Ideal for application with a wide variety of fluids and gases including potable water applications.
  • Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.
Check Stock

100 PCS 3/4 Inch PEX Cinch Clamps, 304 Stainless Steel PEX Fitting Clamps Pinch Clamps Ring Crimp Rings for PEX Tubing Pipe Fitting Connections (Silver -3/4inch(100PCS))

  • ✔【HIGH QUALITY MATERIAL】Pex crimp ring meets ASTM F2098 requirements that adopts 304 Premium Stainless steel material, which features sturdy and durable. Has good corrosion resistance, heat resistance, low-temperature strength, and mechanical properties. PEX barb fitting is an easy to install, low cost solution to connect PEX tubing. Compatible with All PEX Brands Manufactured with American Certification..
  • ✔【360-DEGREE SEAL PROTECTION】These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. The 360-degree narrow stepless clamp concentrates seal compression, rest secure in any PEX pipe using the system..
  • ✔【SPECIAL DESIGN】Special design for all PEX pipe connection fittings, Interlock Rings with 360 Stepless Design. This stepless ear clamp conforms to the ASTM International F2098 standard for securing PEX tubing to insert fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • ✔【WIDE APPLICATION】Widely used in all plumbing systems, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing, etc. PEX barb fittings are compatible for potable water distribution and hydronic heating applicatio....
Check Stock

Hose Clamps 304 Stainless Steel Single Ear Hose Clamp, 125Pcs (7-25.6mm) Crimp Pipe Clamps Assortment Kit 9 Sizes Ear Stepless Cinch Rings Crimp Pinch Fitting Tools (125Pcs with Pliers)

  • HIGH QUALITY- The single ear hose clamp is made of premium raw material 304 stainless steel and has good corrosion resistance, heat resistance, low temperature strength and mechanical properties. The hose clamp stainless steel 304 has good workability such as stamping and bending, and no heat treatment hardening phenomenon. This crimp clamp can be used for a long time..
  • 360° STEPLESS DESIGN- No bulge and gap in the inner ring of the stainless steel hose clamps. Narrow band design provides more concentrated sealing pressure. The special treatment of the edge of the clamp reduces the possibility of damage to the clamped parts. This ear clamp is light weight and obvious clamping effect..
  • WIDELY USED- Standard series of spring clamps are suitable for connection of pipe fittings.
  • Using hose clamp pliers can perfectly connect the pipe to the any brand of crimp pipe fittings or tubing..
  • SHARP PLIERS- The small head design allows for good access in a limited area without damaging the pressure points on the ear clamp. The hose clamp plier is sharp but won't damage, rubber handle grips for a sure hold the clamp. Great length on handles, strong and well built..
  • ONE-STOP SERVICE- High-quality, high stability. If you have any issues at all with this product, our cus....
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

112pcs Hose Clamps Stainless Steel,Stainless Steel Clamps,Hose Clamp Assortment Kit,Adjustable Worm Gear Heavy Duty Pipe Clamps

  • Stainless Steel Material: All fittings on the hose clamp are made of 304 stainless steel, which is sturdy and durable, with good acid and corrosion resistance. You can safely use pipe clamp to fix outdoor pipes without worrying about rusting and cracking.
  • Adjustable Design: All hose clamps stainless steel can be adjusted by screws according to the diameter of the pipe, so that the pipe can be fixed more firmly..
  • Tightly Bound: The tube clamp is very flexible and can be tightly tied to the pipe without loosening, thus preventing liquid leakage.
  • 8 Specifications: There are 112pcs o clamps, including 8 size specifications. Their adjustable range is 24 pieces of 8-12mm, 18 pieces of 10-16mm, 18 pieces of 13-19mm, 12 pieces of 16-25mm, 10 pieces of 18-32mm, 10 pieces of 19-29mm, 10 pieces of 21-38mm and 10 pieces of 21-44mm. Comprehensive size specifications to meet your various needs.
  • Wide Application: The hose clamp kit has a very wide range of applications, and can be used to fix hoses, pipes, cables, pipes, fuel pipes, etc..
Check Stock

TINVHY Hydraulic Copper Tube Crimper Copper Pipe Fittings Crimping and Plumbing Tool Crimping Tool with Crimping Dies Jaw 1/2, 3/4, 1Inch

  • Changeable Crimping Jaws 1/2, 3/4, 1. With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of different size to meet your various demand and make it the fastest solution for pipe maintenance and repair.
  • Humanized Design - With this powerful crimper, you can crimp wires and butt connectors easily. Offering 10 Tons compressive force, more labor-saving, and crimping pipes in seconds.
  • Material - The head of crimper is made of durable steel with stainless steel coating, strength and good toughness.
  • Easy to Carry - The item comes with a durable yellow plastic box, which makes it portable to carry and compact to store.
  • Replacement for Viega Copper, Elkhart, Conex Pipe Fittings. The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves.
Check Stock

CVS 50 PCS 3/4 Inch PEX Cinch Clamp Rings, Stainless Steel Pex Fittings Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections (3/4 Inch)

  • HIGH QUALITY - Meet ASTM F2098 requirements. Made of 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion..
  • EASY INSTALLATION - Slide the 3/4 inch PEX cinch clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool. Providing a strong, leak-free and reliable crimp fitting connection..
  • WIDELY USED - Conversancy Brand products’ quality and performance is field-proven. Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • CERTIFIED - Meet the same standards for all commercial and residential plumbing applications - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc..
  • SIZE - 3/4 inch (23.3mm) PEX clamps, fit for 3/4 inch PEX pipe..
Check Stock

Da by 2 pcs 3/8 10mm Brass Tee Barb Fittings for 3/8 ID Hose,6 pcs Stainless Steel Pipe Clamps,3 Way Union Intersection for Water/Fuel/Air T

  • Packaging Includes：2 Brass hose barb tee fittings, they have three barb 3/8" x 3/8" x 3/8", 6 Stainless steel pipe clamps fit hose outer diameter of 13mm-19mm..
  • Material: Hose barb made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
  • Solid Connections:The T shaped hose barb can be solid connected to the hose（Fit hose witch inner diameter of 10mm）,The pipe clamps can create a tight seal on flexible or semi-rigid hose..
  • Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..
  • Heavy T Shaped Brass Barbs and thickened wall, higher strength and very rugged..
Check Stock

Bessey VAC-6 Angle Plates (6-Pack)

  • 【SIZE】- Fit Pipe Diameter: 14mm/ 0.55".
  • 【MATERIAL】- Made of 304 high-grade stainless steel. After punching, bending, and integral molding, the structure increases the rib structure to improve the strength of the pipe clamp. Fastened and durable.
  • 【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
  • 【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
  • 【PACKAGE CONTENT】- 20Pcs × Rigid Pipe Straps.
  • Note: Mounting screws are not included here.
Check Stock

Csst Flexible Gas Tubing 1/2 X 75

  • Saves time - 60% time savings vs. steel pipe fitting.
  • Cleaner and easier to handle than black steel pipe.
  • Bends around corners eliminating need for additional joints and fittings.
  • Use coordinating HOME-FLEX CSST fittings.
  • Great for seismic areas - ridged pipe often leaks after even small tremors.
Check Stock

Slime 40069 Inflation Station, Garage Inflator, Pro-Series, Wall Mounted Air on Demand, Flat to Full in 4 Minutes, Cars, Trucks, Bicycles, 120V,Black

  • ...ny indoor/outdoor Natural Gas or Liquid propane applications to the gas supply piping, such as fire pit gas tube, gas range pipe, water heater gas hose,Generator gas tube,Compressor gas tube,Grill gas line.etc.
  • 【Sturdy material 】- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, Comes with a 1/2" MALE Brass fittings on both end, Standard Male and Female Pipe Threads for easy connections..
  • 【Flexible and Safety】- Corrugated Stainless Steel Tubing is flexible and can be cut into any length you need,easily snakes into attic and basements areas, around corners and bends, Using one-piece molding exquisite Craft, There is no interface in the middle of the pipe body, reducing the connection point and preventing gas leakage.Really convenient and 100% safety..
  • 【Installation】-High temperature resistance,Low pressure resistance,Explosion-proof and compressive material, it can be installed exposed to indoor light , or it can also be embedded in concrete, or behind the wall in dry wall systems as needed. als....
Check Stock

TAISHER 2PCS Forging of 304 Stainless Steel Compression Tube Pipe Fitting Connector 1/4 Tube OD x 1/4 NPT Male Straight Adapter

  • Widely used ——This pipe fitting is suitable for fuel/air/liquid/oil/gas/vacuum pipelines, with good air tightness, pressure resistance, and not easy to trip.
  • Product Material —— Forging of 304 stainless steel strength and resistance to corrosion..
  • Working Temperature —— Temperature range from -868 to 1472 degrees F/-500 to 800 degrees c..
  • Maximum Pressure —— Maximum working pressure is 2800PSI..
  • Function —— Fittings for connecting and extending stainless steel, copper, rigid and semi-rigid plastic pipes of the same diameter, hex nut construction creates a tight seal, one end is connected to the pipe and the other end is an NPT male connector.NPT thread size is not the actual diameter, it is only the nominal pipe size..
Check Stock

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

  • 「WHAT YOU WILL GET」- The gas hose connector kit mainly includes a 24in gas hose, 2 pc 15/ 16 -16 UN x 3/4'' FIP, 2 pc 15/ 16 -16 UN x 3/4'' MIP (Tapped 5/8'' FIP) and a sealing tape. Factory leak tested 100% pass!.
  • 「COMPATIBLE WITH」- A stainless steel gas line hose mainly use for connecting gas stove, gas dryer, furnace, gas water heater. Gas pipe outside dimension of 1'', inner diameter 3/4''. Thicker pipe diameter can transmission gas quickly..
  • 「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
  • 「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • 「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused f....
Check Stock