Categories

Best Stainless Steel Roofing Screws

Simpson Strong-Tie S11A150RNBP 1-1/2\ x .120 304SS Ring-Shank Roofing Nails 600ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-1/2-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

Simpson Strong-Tie S11A125RNBP 1-1/4 x .120 304SS Ring-Shank Coil Roof Nails 720ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-1/4-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

Metal Roofing Screws 250 12 x 2 ZINC/NO Paint Hex ReGrip Sheet Metal Roof Screw Sharp Point Metal to Wood siding Screws.

  • #12 Sheet Metal ROOFING SCREWS.  Sharp Point ReGrip Screws. 5/16" Hex Head, ~9/16" Washer.
  • 250 COUNT Metal-to-wood roofing screws are galvanized and zinc coated to prevent rusting.
  • Hex washer head, sharp point roof screw with EPDM washer seal, seals roofing panel to screws..
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Galvanized Screw is Non-Painted and gets it's Color from the Galvanizing Process and is natural gray.
Check Stock

#8 x 1/2\ Stainless Philips Pan Head Sheetmetal Screw (1/2\ to 2\ Lengths in Listing) 100 Sheet Metal Screws (#8 x 1/2 Inch)

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
  • Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.
Check Stock

Metal Roofing Screws: (250) 10 x 2\  Galvanized Hex Head Sheet Metal Roof Screw. Self Starting Metal to Wood siding Screws. EPDM Washer. No Paint

  • Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 2" Under Head.
  • Metal Screws are painted to closely match many brands of metal roofing though color may vary.
  • Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • #10 Sheet Metal roofing screws are galvanized for corrosion resistance.
Check Stock

Metal Roofing Screws 250 10 x 1 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

  • Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1".
  • Metal Screws are painted to closely match many brands of metal roofing though color may vary.
  • Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc).
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal.
Check Stock

Ace Screws 3 Roofing Insulation Plates SKINNYnSTRONG - 1,000pc ,Goes with Self Tapping Fasteners into Metal and Wood Roof Decks Corrugated Roofing Commercial Insulation EPDM TPO PVC

  • ASTM Tested and ISO 9001:2015 Standard. All of ACE Screws are tested by Element Materials Technology and SGS laboratories for quality assurance.
  • Ace Screws SKINNYnSTRONG 3" Insulation Plates are designed to be used with Ace Screws FATnSTRONG Roofing Fasteners to secure insulation as required by....
  • SGS Pull Out Test Results 18ga, 20ga, 22ga Steel Decking: 500.94 lbf.
  • Material: AZ150 (AZ50 Galvalume) aluminum-zinc coated steel.
Check Stock

#14 Metal Roofing Screws 250 Screws x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood Sheet Metal Screws with EPDM Washer for Corrugated Roofing

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1-1/2".
  • Polyurethane coated screw head is painted to closely match many brands of metal roofing (color may vary).
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
Check Stock

Dripping In Chocolate

  • Built in easy to install 5 FT sections. 4" leg goes under the shingle with 1.5" hemmed edge on the fascia..
  • Matching 1.5" metal roofing screws, 1/4" hex bit driver, and gloves included with each order..
  • 75 degree angle fits most roof pitches with ease. Made from 26 Gauge metal roofing material with 40 year paint finish..
  • Custom sizes and shapes available. Shipping is free. All orders are shipped out same or next business day..
Check Stock

60 Pieces Stainless Steel Belt Buckle Screws Tip Screws Leather Replacement Accessories Wrench with Drill Bit

  • Stainless steel tip screws for belt buckle sets are sturdy and rust free..
  • Stainless steel tip screws size (diameter x length): Approx, 7/64 x15/64inch..
  • Equipped with stainless steel screw wrench and special drilling bit for screws..
  • NOTE：Please accurately measure the size of the screws you need to repair. You can also re-drill and replace these stainless steel screws with the drill bit that comes with this screw..
  • Stainless steel pointed screws can be used to repair belts, wallets, toys, watches and watch straps, etc..
Check Stock

Ace Screws 3-'' Bullseye Plate -''FLATAss-'' (1,000pc), Roofing Insulation Plates, Goes with Self Tapping Screws into Metal & Wood Decks, Corrugated Roofing, Commercial, EPDM, TPO, Silver

  • The Ace Screws plates are designed to be used with Ace Screws #15 Fasteners to secure ridged insulation, base sheet, EPDM, TPO, and PVC to steel or wood structural decks..
  • Ace Screws roofing fasteners and plates are approved by many of the major material manufactures to be utilized in full system warranties..
  • Manufactured using AZM technology (Aluminum, Zinc, and Magnesium). After 15-cycle Din 50018, Ace Plates showed less than 1% red rust, with 15% being acceptable.
  • Ace Plates go through continuous Quality Assurance testing by third party companys..
Check Stock

Hard-to-Find Fastener 014973311063 Thread Cutting Floor Board Screws, 1/4-20 x 2, Piece-45

  • TYPE 316 MARINE GRADE STAINLESS STEEL WOOD SCREWS - ideal for all exterior woodwork and construction projects..
  • FOR USE IN HIGHLY CORROSIVE APPLICATIONS - Eagle Claw Fasteners 316 grade stainless steel wood screws are recommended for use in highly corrosive coastal, wet and outdoor applications including for docks, decks, balustrades, boat building, fences, jetties, walkways, saltwater pools and general timber construction..
  • EXTREMELY HIGH MARINE GRADE 316 STAINLESS STEEL - Marine grade stainless steel wood screws prevent ugly rust stains on your beautiful outdoor timber structures, and give you a quality fastener that will outlast the timber in saltwater or high corrosion environments..
  • STAR DRIVE HEAD (TORX DRIVER INCLUDED) AND TYPE 17 POINT - Eagle Claw Fasteners stainless steel wood screws have a star drive head (torx driver included) and type 17 point for easy driving (pilot holes recommended). Nibs under the head help seat the screw. Note that these are not self drilling screws..
  • SUITABLE FOR VARIOUS WOOD TYPES - Eagle Claw Fasteners stainless steel wood screws are suitable for use with all hardwood, softwoods and pressure treated lumber including redwood and cedar..
Check Stock

Mystery Road

  • Advanced Quality: Made of 430 stainless steel. Water, rust and deformation proof. Easy to clean and environmentally friendly with low maintenance cost. Size: 19.5W x 15.5H Inch (Please note that the mounting direction is fixed and cannot be reversed).
  • Convenient Installation: A handle is equipped on each side of the filter for easy installation and replacement of the grease filter..
  • Efficient Performance: These high-quality stainless steel baffles with 5 collection troughs, will cause the air to change direction and collect to form grease, and then enter the drain. Provide 100% flame shield for preventing extreme fires from entering the exhaust hood, roofing pipes, etc..
  • Hassle-free Usage: Grease holes are evenly distributed on both sides. The grease does not get stuck easily, and the holes are not easily plugged. 94% Average grease removal efficency (tested at 300 FPM), this stainless steel grease filter holds up to daily flame cooking, grilling, and frying..
  • Handles Vertical: Our baffle grease filter needs to be mounted vertically with handles on the left and right sides. Thus, it can help make the attached oil beads flow down to the bottom due to gravity（the hood in the picture not included)..
Check Stock