Categories

Best Stainless Steel Shim Stock

Valve Spring Shim - 1.500\ OD.645\ ID .060\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Guaranteed Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1.500" Outside Diameter, 0.645" Inside Diameter. Includes 1 0.060" Thick Shim..
  • Recommended for use with our 916, 26056, 917, 928, 929, 924, 925, 911, 954, 936, 938, 930, 953, 999, 26094, 943, 26055, 939, 927, 919, 933, 935, 944, 26095, 26097, 932, 26089,955, 26115, 26099 and 26547 springs..
  • Available in an assortment pack under part number 4757..
Check Stock

9 Piece Punch & Die Set Metal Punch Tool for Cutting Coins Metal Plastic-with Clear Acrylic Guide

  • See What You Cut- Clear plate guide for easy alignment and placement Accurate to within 0.002 inch.
  • Precise Cuts- Hole punch set made from precision ground hardened alloy steel- 9 pieces for a variety of hole sizes.
  • Backed by Amazon's A-Z Guarantee with Prime available and a 1 year manufacturer guarantee.
  • Many Uses- Works well for metal shim, brass shim stock, sheet styrene, leather punch, paper, decal stock, coin ring making, and model ship building.
  • Well Oiled And Ready To Cut- Normal to see grease on the unit Capacities: 20 Gauge Steel Sheet, 13 Gauge Aluminum & Brass.
Check Stock

StewMac Acoustic Guitar Neck Shims Maple - Set of 10

  • Fitting an acoustic guitar neck into a dovetail joint is precise work - many times you need to shim a loose side of a dovetail when fitting the neck.
  • This wafer thin shim stock is well made for a clean fit, and is just large enough to create a taper or wedge.
  • Maple shim stock is a problem solver in a busy repair shop, and we found this size has a million uses around the shop—from shimming a saddle, to....
  • Each shim is a 2" x 5" rectangle, approximately 0.022" (0.55mm) thick.
Check Stock

12 Pieces 304 Stainless Steel Strips Stainless Steel Shim Stock Assortment 1 Width x 6 Length 0.001 0.0015 0.002 0.003 0.004 0.005 Thickness Metal Shims

  • ✔ 304 stainless steel strips are made of premium 304 stainless steel which has excellent rust & corrosion resistance performance and widely loved by people..
  • ✔ Stainless steel shims are bendable, smooth surface without burrs, can be machined or cut into various parts such as gaskets, washers, shims and spacers..
  • ✔ With 6 popular thicknesses to meet your various needs, 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005" thickness,6" length x 1" width, 2 pieces for each thickness..
  • ✔ Stainless steel shim stock widely used in all kinds of gaskets,mechanical parts,electronic components,metal stamping parts,chemical equipment,machine repair and maintenance,precision machinery,and so on..
  • ✔ Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

10 Pcs Metal Strips Metal Shim Stock Metal Sheet Metal Shims Gap Filler Trim Strip 12 Length x 0.02 Thickness 1 Width Stainless Steel

  • Corrosion Resistant and Rustproof: 304 stainless steel sheet is made of quality 304 stainless steel, which has good corrosion resistance and is loved by people.
  • Bendable and Cuttable: the trim strip has good bending ability and can be machined or cut into various parts.
  • It can be freely DIY bent and cut into the desired shape for your long term use.
  • Stainless Steel Shim Stock Dimension: the metal strip is approx. 31 cm/ 12 inch in length, 2.54 cm/ 1 inch in width, and 0.6 mm/ 0.02 inch in thickness, which is suitable for your use.
  • Wide Use: the metal shims can be widely applied in crafts, decoration or art, as well as kitchen tools or supports, and more, which are very practical and versatile.
  • Sufficient Quantity: you will receive 10 pieces of stainless steel strips.
  • The strip has a protective PVC peel off covering, which can maintain and ensure that one side has a mirror effect and looks smooth and clean.
Check Stock

Valve Spring Shim Kit - 1.300\ OD.520\ ID .030\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1. 300" Outside Diameter, 0. 520" Inside Diameter. Includes 16 0. 030" Thick Shims..
  • Recommended for use with ~ 1. 300" Outside Diameter or smaller like our 26915 Beehive and 7228 Conical Spring..
Check Stock

8 Pieces Brass Sheet Brass Shim Stock Assortment 6 Length x 3 Width 0.001 0.002 0.004 0.006 0.008 ,0.012 0.016 0.02 Thickness Brass Metal Shim Stock

  • ✔----- Our brass shim stock assortment include 8 thicknesses, which can meet your different needs in daily life. You deserve it..
  • ✔----- Brass sheet is made of quality brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • ✔----- Brass shim stock is nicely polished up and cut, has high strength and hardness, no scratches and very smooth, safe to use..
  • ✔----- Brass shim widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • ✔----- Shim stock assortment size: 6" Length x 3" Width, 0.001", 0.002", 0.004", 0.006", 0.008",0.012", 0.016", 0.02" Thickness, you will use them one day..
Check Stock

Shim, Round, Min ID 0.687 in, PK25

  • 003cb003ePrice For:003c/b003e Each 003cb003eInside Dia.003c/b003e: 0.687" 003cb003eShim Material003c/b003e: Stainless Steel 003cb003ePackage Quantity003c/b003e: 25 003cb003eColor003c/b003e: - 003cb003eTemp. Range (F)003c/b003e: - 003cb003eShim Thickness003c/b003e: 0.0030" 003cb003eThickness (In.)003c/b003e: 0.0030" 003cb003eShim Temper003c/b003e: Not Rated 003cb003eTensile Strength (PSI)003c/b003e: 70,000 003cb003eMaterial003c/b003e: 18-8 Stainless Steel 003cb003eRound Shim Type003c/b003e: Arbor Shim 003cb003eThickness Tolerance003c/b003e: +/-0.0005" 003cb003eGrade003c/b003e: 18-8 003cb003eItem003c/b003e: Shim 003cb003eMeets/Exceeds003c/b003e: -.
  • 003cb003eRockwell Hardness003c/b003e: B80 003cb003eOutside Dia.003c/b003e: 0.873" 003cb003eCountry of Origin (subject to change)003c/b003e: United States.
Check Stock

Stainless Steel Slotted Shim Kit, Size C, 4\ x 4\ Standard Kit (260 shims)

  • Stainless Steel Pre-Cut Slotted Shim MADE IN THE USA, Unique Tab Design for Easy Handling.
  • Thickness Marking in both inch and metric (mm) units. Accu-size Marking - No Measurement Required.
  • More for your money! Our shim kits have double the amount of shims vs. competitors!.
  • Kinetic Improvement also offers refill packs of each individual size shim.
Check Stock

GPM for Traxxas Slash 4X4 / Slash 4X4 LCG / Slash 2WD F-150 / Stampede 4X4 VXL Upgrade Parts Stainless Steel 304 + Aluminum Rear CVD Drive Shaft with Steel Wheel Hex - 1Pr Set Red

  • Product Name : Stainless Steel 304 + Aluminum Rear CVD Drive Shaft With Steel Wheel Hex - 1Pr Set.
  • Axle joints are made with stainless steel 304, more sturdy and not easy to rust. Special design on the axle joint, the joints are protected and wrapped inside the axle. Aluminum shaft body made from alloy 6061T6 material which is light weight with high tensile strength. The drive shaft is desgined slightly thicker than the original for longer durability. Silicon O-rings are inserted at the axle joint to minimize the impact on the CVD when landing on ground..
  • Accessories included : 3mm Steel Hex Shim-2pcs.
  • Original stock part number : 6828X + 6850X + 6853X..
  • Will fit : Traxxas 1/10 Slash 4X4, Slash 4X4 LCG (68086-21), Slash 2WD Ford F150 Raptor, Stampede 4X4 VXL.
Check Stock

Sailing Travel Kitchen Tools Silicone Stock Pot

  • MATERIAL SAFETY: Sailing Stainless Steel Silicone Collapsible Stock Pot has High Quality Silicone and Stainless Steel Material(18-8). 100% food grade....
  • HEAT-RESISTANT: Silicone Collapsible Stock Pot: Up to 356 °F. The stainless steel base heats up quickly and evenly. It can be used safely on both gas....
  • CONVENIENT & SPACE SAVING: Sailing Stainless Steel Silicone Collapsible Stock Pot is perfect Stock pot for camping, Hiking, Backpacking, Traveling, or....
  • CAPACITY: Sailing Stainless Steel Silicone Collapsible Stock Pot size: 9.44"L x 13.58"W x 4.72"H, collapsed 1.77"H (without lid). It is a three quart....
  • ORDER "Sailing Stainless Steel Silicone Collapsible Stock Pot" WITH NO WORRY - 100% SATISFACTION GUARANTEE: If you are not completely satisfied with....
Check Stock

Acrylic Guide Punch and Die Panel Replacement Part Only for Jounjip Truepower Harbor Freight 9 Piece Punch And Die Set

  • See What You Cut- Clear plate guide to easily align coins, metal, leather to make precision hole punches.
  • Easy To Install- Simply unscrew the hex screws with provided hex key and replace old broken panel.
  • Backed by Amazon's A-Z Guarantee with prime available and a 1 year manufacturer guarantee.
  • Center the alignment punch set by inserting all 9 pieces through their respective holes.
  • Many Uses- Works well for metal shim, brass shim stock, sheet styrene, leather punch, paper, decal stock, coin ring making, and model ship building.
Check Stock

Stainless Steel Slotted Shim Kit, Size A, 2\ x 2\ Starter Kit (130 shims)

  • Stainless Steel Pre-Cut Slotted Shim MADE IN THE USA, Unique Tab Design for Easy Handling.
  • Thickness Marking in both inch and metric (mm) units. Accu-size Marking - No Measurement Required.
  • MORE FOR YOUR MONEY -- OUR STARTER KIT CONTAINS MORE SHIMS THAN OTHER STARTER KITS FOR SALE ON AMAZON..
  • Kinetic Improvement also offers refill packs of each individual size shim.
Check Stock