Categories

Best Stainless Steel Strap Clamp

CV Joint Boot Clamp Pliers - 22Pcs CV Boot Clamps Kit Auto Repair Tool Automotive Hose Axle Plier CV Clamp Tool for Most Cars

  • CV BOOT CLAMP PLIERS – With 2pcs CV joint boot clamps pliers car banding tools kit set for fast and simple tensioning and securing of CV boot banding strap. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • 20PCS CV BOOT CLAMPS – 10X small clamps and 10X big clamps is included.Made of stainless steel, with high toughness and adjustable length.It’s perfect for you to replace the car broken drive shaft CV boot clamp..
  • CV BOOT CLAMP TOOL KIT – We prepared 10Pcs small stainless steel cv boot clamps and 10Pcs large clamps for fixing cv boots. and 2pcs Auto Cv Joint Boot Clamps Pliers in this car banding tools kit, which is a perfect set for fast and simple tensioning and securing of CV boot banding strap..
  • EAR CLAMP PLIERS – Ideal for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This CV joint axle boot clamp pliers fits most of cars..
  • CV JOINT BOOT – The cv boot clamps are made of non-magnetic stainless steel material, which is an ideal choice for areas that get a lot of rainfall or snow because the metal is resistant to rusting and very durable..
Check Stock

EVIL ENERGY 2.25' 2 1/4 Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel 2pcs

  • Joins 2.25 inch OD Pipe to 2.25 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, muffler and catalytic converters. Width of strap: 2.94inch (74.8mm). Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the sections being clamped have sufficient lengths of straight pipe leading into it. It is removable and reusable, easy to install without welding..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

DCT Multi-Angle Adjustable 13ft Band Wood Corner Clamp – Woodworking Clamping Kit that Clamps Picture Frames & More

  • ...U GET - You will get 50 pcs metal u bracket. The M12 pipe strap clamp is suitable for pipes with a diameter of 12mm/0.47inch. The diameter of the mounting hole is 4mm/0.15inch, the width is 11.7mm/0.46inch, and the thickness is 0.5mm/0.02inch..
  • HIGH QUALITY CLAMP - Tube strap tension clip is made of high-quality 304 stainless steel material, high hardness, corrosion resistance, water resistance, oil resistance. The surface is treated with rust prevention, and it can be used in a humid environment without worrying about rust. The metal pipe clamp adopts superb production technology, the surface is smooth and burr-free..
  • MULTIPLE USE - The u-tube clamp is widely used in stainless steel pipes, rubber hoses, gas pipes, plastic steel pipes, drainage pipes, etc. The rigid pipe strap is suitable for fixing pipe line with oil, water and gas..
  • SLOTTED DESIGN - The slotted design is more sturdy and not easily deformed. The U-shaped slotted design is suitable for fixing pipes on various surfaces and supporting structures. The metal pipe strap can be fixed on the wall and ceiling with screws or expansion screws, and the installation is simple fast..
  • QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Custom....
Check Stock

EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel

  • Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

STEELSOFT DIY Hose Clamp System Kit, 9.8 FT Band + 6 Fasteners, 304 Stainless Steel Band Clamp Pipe Clamp Screw Clamp Metal Hose Clamp Large Adjustable for Ductwork, Pole Mount, Metal Strapping

  • Smooth Worm Gear Clamp: Our fastener steel is thicker than competitions, which is not easily bent when making the hose clamp tight! We used the best quality screws which can grip the strap band tightly and keep smooth driving when turning the screwdriver! There is no hard pressure to apply!.
  • All 304 Stainless Hose Clamps: The strap roll 9.8 FT and 6 PCS fasteners are all made of real 304 SS, not 201 SS, anti-rust and anti-salt, very suitable for outdoor use and coastal areas. The stainless steel hose clamps can be reusable after you release it again. Last forever! Separated fasteners can be purchased in our Amazon store..
Check Stock

DIY Your Odd Sizes Band Hose Clamp Assortment Kit 14 FT Straps with 10 Fasteners Large Long Adjustable Worm Gear Screw Hose Clamps Stainless Steel Duct Clamp Pipe Clamp Metal Strapping

  • Cost-effective: This stainless steel hose clamps assortment is a home improvement items you can make any sizes of metal clamps and save more from the price of pre-made worm drive hose clamps..
  • Quality Fasteners: Our band clamps will not be easily bent and stripped out when tightening. The min.ultimate torque is 58 lbf-in. The hex size of screw clamp is 5/16 inch..
  • All 304 SS: The 1/2" wide metal straps and 10 worm clamp fasteners are all made of real 304 stainless steel which are anti-corrosive, reusable and ideal for outdoor use. The screw is 304 stainless too, not carbon steel..
  • Easy To Use: Following the directions included, you will set up the adjustable clamp very fast. Connect the metal strap with hose clamp fasteners, get large hose clamp 10 inch 12 inch 14 inch 16 inch 18 inch 20 inch 24 inch 30 & 40 inch extra large!.
  • Widely Used: Our stainless hose clamp assortment set can diy hose clamps in min.2.5 inch and max.53 inch diameter for any pipe clamp duct clamp plumbing, metal strapping banding for round posts, segmented wood, muffler heat shield. It work better than long metal zip ties as it's easy to release and reusable for more projects!.
Check Stock

6 Pack 3/4 inch Adjustable Pipe Bracket Clamp, Stainless Steel Wall Ceiling Mount Pipe Support Pipe Hanger Clamp, Split Ring Hanger ID 15mm-19mm

  • 15-19mm Pipe Strap Clamp: The Pipe Clamp fits for 1/2 inch/15mm to 3/4 inch/19mm diameter pipe, the nut is M8..
  • Stainless Steel Pole Clamp: The split ring hanger is made of 304 stainless steel, it durable and offers rust protection..
  • Package included: 6 pack Pipe Bracket Clamp. Length: 2.2 inch/55mm, width: 1.1/ 28mm..
  • Easy to Use: Easy to install, pipe bracket clamp can be installed on the wall or ceiling..
  • Applications: These adjustable pipe support bracket clamp are suitable for both industrial and home applications..
Check Stock

Adjustable Hose Clamps Band Clamp – 304 Stainless Steel Air Duct Clamp with 14 Fasteners, Large Worm Gear Hose Clamp for Automotive, Pipe, Plumbing, Tube and Fuel Line (34.5FT, 14PCS)

  • DIY HOSE CLAMP - There are different size tubes in your life, when you choose our Band Clamp set, you can easily trim the hose clamp strap in length you need, then insert the fastener to reach the desired size, no more waste of any materials.
  • MORE SIZE OPTIONS - 34.5 FT 304 stainless steel duct clamp strap with 14pcs fasteners, suitable to cut and get your long large pipe clamp in different sizes, such as 12 inches, 14 inches, 16 inches, 18 inches and so on.
  • EASY TO USE - The worm gear hose clamp adopts the open structure of the inner and outer ring, you just need to adjust the size with screwdriver to loosen or tighten, fix the band clamp on the joint to provide sealing performance. The large air hose clamp can be applied to big size mufflers, automobile exhaust pipe, cables, tubes and so on.
  • DURABLE MATERIAL - Hose clamp kit is made of 304 stainless steel, strong rust resistance, water resistance, corrosion resistance, oxidation resistance, durable, which can be applied indoor and outdoor, such as in kitchen, bathroom, garden, boat and so on.
  • 100% SATISFIED - If you have any questions or concerns with your product, just contact us and we will replace the product or refund your order. Our team is always at your service..
Check Stock

EVIL ENERGY 2.0' Exhaust Narrow Band Muffler Seal Clamp Stainless Steel 2PCS

  • Joins 2.0 inch OD pipe to 2.0 inch ID pipe. Exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, mufflers, catalytic converters, headers, manifolds. Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection with either straight or "Z" compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. Material: 304 stainless steel strap and mild steel hardware, serviceability, durability and reusable..
  • Easy to handle and disassemble. Suggestion: Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Hoses Clamps Clamps Worm Worm Clamps Stainless Steel Large Hose Clamp Worm Drive Hose Clamps Adjustable Pipe Hose Clamp for Intercooler Pipe Plumbing Tube and Fuel Line 9 Pieces,11.5 Feet

  • DIY hose clamp: you can trim the hose clamp strap in length you want easily, then insert the fastener to make a suitable size you want, no more waste any materials.
  • You will get 1 piece adjustable hose clamp and 8 pieces fasteners, enough quantity to meet your different needs.
  • Longer hose clamp: the stainless steel duct clamp strap's total length is 11.5 feet, suitable to cut and get your long large hose clamp in different sizes, such as 12 inch, 14 inch, 16 inch and so on, the max size is 43 inch.
  • Durable material: the hose clamp and fasteners are made of quality 304 stainless steel, rust-proof, water-proof, corrosion-resistant, strong, durable and long lasting use, which can be applied in outdoor and coastal areas.
  • Powerful function: adopts the open structure of inner and outer ring and the bolt is fastened, the worm drive pipe clamp is torsion-resistant, pressure-resistant, tightly locked and with large adjustment range, provides sealing performance and helps to solve the problem of liquid gas leakage.
  • Easy to use: you just need to loosen or tighten the screw of the hose clip by a screwdriver to adjust the size, attach the hose to the fitting tightly, and it can be applied to secure hoses, pipes, cable, tubes, etc..
Check Stock

Hose Clamp Stainless Steel DIY 7.9 FT Metal Strapping with Holes + 6 Fasteners Large Adjustable Clamp Worm Gear Hose Clamps Pipe Clamp Band Clamp Air Ducting Clamp for Pipe Automotive Cable Tube

  • DIY Hose Clamp: You can trim the stainless strap at any length you want easily to adapt to different hoses, which can be used for pipe repairing in your house, garage, lawn, garden and so on..
  • Large Hose Clamp: The hose clamp kit comes with a 7.87 feet long × 0.5inch wide metal strap and 6 fasteners in total. It’s a simple matter to make large pipe clips, such as 12 inch, 14 inch, 16 inch and the max size is 29 inch.
  • Durable Stainless Steel: The hose clips are made of high quality 304 stainless steel material that are corrosion-resistant, water-proof, rust-proof. It is also fine to use outdoors and in coastal areas. Solid and sturdy material ensure the adjustable hose clamps last a long time for use, and can be reused..
  • Powerful Function: The worm drive clamp is torsion-resistant, pressure-resistant, tightly locked, helps to solve the problem of liquid gas leakage. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications..
  • Easy to Use: You just need to attach the fastener into the pipe strap like picture 5, and then loosen or tighten the screw of the hose clip with a screwdriver to adjust the size, attach the hose to the fitting tightly. Perfect to apply in automotive, industrial, boat/marine, shield, electronic....
Check Stock

Ripeng 200 Feet 40 Pieces Hoses Clamps, Worm Gear Clamps Stainless Steel Adjustable Duct Hose Large Clamp for Intercooler, Pipe, Plumbing, Tube and Fuel Line, 43 Inch

  • ...trim the hose clamp strap in length you want easily, then insert the fastener to make a suitable size you want, no more waste any materials.
  • You will get 2 piece adjustable hose clamp and 40 pieces fasteners, enough quantity to meet your different needs.
  • Suitable Size: the stainless steel duct clamp strap's total length is 100 feet, suitable to cut and get your long large hose clamp in different sizes, such as 12 inch, 14 inch, 16 inch and so on, the max size is 43 inch.
  • Reliable Material: the hose clamp and fasteners are made of quality 304 stainless steel, rust-proof, water proof, corrosion resistant, strong, and long lasting use, which can be applied in outdoor and coastal areas.
  • Wide Range of Uses: adopts the open structure of inner and outer ring and the bolt is fastened, the worm drive pipe clamp is torsion-resistant, pressure-resistant, tightly locked and with large adjustment range, provides sealing performance and helps to solve the problem of liquid gas leakage.
  • Convenient to Use: you just need to loosen or tighten the screw of the hose clip by a screwdriver to adjus....
Check Stock

304 Stainless Steel Hose Clamp Assortment Kit DIY Cut-To-Fit 35 FT Metal Strap + 16 Stronger Fasteners Large Adjustable Worm Gear Hose Clamps Screw Clamps Duct Pipe Metal Clamp Strapping

  • ...or our screw clamp with 5/16'' hex head is available..
  • Cost Effective: No longer need to stock different sizes of adjustable hose clamps. It is more flexible that you can make hose clamp large as 14 inch 16 inch 18 inch 20 inch 24 inch 30 inch 40 inch! The standby materials come in handy for future projects!.
  • All 304 Stainless Steel: 12 FT strap and 8 PCS fasteners are all made of high quality 304 stainless steel, NOT 201 SS. These worm clamps will last forever, reusable, anti-rust and anti-corrosive, very suitable for outdoor use!.
  • No Jamming No Slipping Fasteners: The steel sheet of our entire fastener structure is thicker! It keeps the strapping strong and heavy duty. The thick teeth on fastener will keep the tensile strength larger! Better still, our fastener worm driving is very smooth, no need to apply hard pressure..
Check Stock