Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

Automatic Chicken Water Nipple Drinker Feeders Poultry Hen Duck Screw Style Water Drink Feeder by Livestocktool (25)

  • WIDE APPLICATIONS- you can apply them on pipes, buckets and more to make a convenient water feeder for chicken, geese, broilers, breeders, pullets, ducks and game birds, etc..
  • EASY TO CLEAN- these drinker nipples are made of durable plastic and stainless steel, and the nipples can be removed thus you can clean them easily when needed.
  • NEAT and DRY- with Livestocktool screw style drinking nipples, you will never see the mess caused by water bowls or other traditional waterers again.
  • It is recommended that 3 chicken/ birds share 1 nipple, and chicken will get clean and fresh water from these 360 degree nipples easily.
  • WATERER MEASUREMENTS- screw size is 11/ 32 inch, and the pilot hole of drill bit is 5/ 16 inch.
Check Stock

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

3/16\ Cable x 1/4\ Thread, Stainless Cable Railing Xtra Long Threaded Stud

  • This product is a part of the HAAS Stainless Legacy Cable Rail System Dome Swage - 3/16 inch size, Stainless Steel, Type 316..
  • Electro Polished! Using electricity in a tank of chemicals, the outer layer of the surface of the part is peeled away to expose the chromium molecules and that results in a shiny, corrosion resistant finish..
Check Stock

Muzata 20Pack 1/8' Black Swage Lag Screws Left & Right Black Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck NeatBlack System 10 Pairs CK17, CA7

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8″ swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4″ sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8″ cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, ....
Check Stock

Lug Crimper Tool for 10 AWG - 400 MCM wire lugs- DIELESS Indent Electrical Battery Terminal Cable Wire KH-230

  • Can crimp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job....
  • Great to swage stainless steel wire/rope up to 1/8th inch. Although our test show it will crimp 3/16th we do not warranty it for use on 3/16th but we....
  • Hydraulic tools allow for way more force from a much smaller package. It requires a 36" mechanical crimper/swage tool to compare to the force this....
  • Our kit includes 8 different size die heads, these can be adjusted 180° to help accommodate tight spaces. Please note this tool requires very little....
Check Stock

Hotop NPT 3/8 Inch Stainless Steel Male and Female Quick Connector Kit Pressure Washer Adapter Set and 2 Packs NPT 3/8 Inch Stainless Steel Quick Connector Plug Male Nipples

  • Fine workmanship: these quick pressure washers and pressure washers nipples are made with accurate process, and don’t leak and fade easily.
  • NPT-compliant: these adapter sets and quick connector plug nipples are all NPT-compliant, please check the specifications before connect them, you can connect to most NPT-compliant connectors.
  • Size: stainless quick connector kit and pressure washers coupler nipples are 3/8 inch, pay attention to connect to the 3/8 inch size connector before connecting.
  • Strong pressure resistance: these quick connector kit and stainless steel connect nipples withstands pressure is up to 5000-6000 PSI.
  • Easy to connect: you can assemble these pressure washers and quick connector plug nipples easily, these adapter sets and nipples make a quick connection for hose, water pump, ball valve, telescoping wand, surface cleaner and so on.
Check Stock

Loos Cableware MS20667-2 Stainless Steel Fork End for 1/16\ Diameter Wire Rope

  • Stainless Steel Marine Eye Swage Fitting.
  • Type 316 Stainless for superior corrosion resistance even in salt water environments.
  • Convenient package of one fitting for 5/32" wire rope.
Check Stock

Hilmor 1839022 Swage Expander Head - 1-1/8 HVAC Swage Tool and Pipe Bender Accessory

  • SWAGE EXPANDER HEAD: A variety of heads available to make a picture-perfect swage.
  • CORRECT SIZING: Find the size that works for you. Expander heads range from 3/8" to 1-5/8".
  • COMPATIBLE: Use with hilmor's Compact Swage Tool and Pocket Size Deburring Tool.
  • VERSATILE: For use with soft metals - Copper, Steel, Aluminum, Brass tubes.
Check Stock

Hydraulic Cable Crimper and Swage Tool. Great for Crimping Battery Lugs, Large Electric Cables or Swaging Stainless Steel Cable/Rope.

  • ...imp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job done..
  • Can crimp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job done..
  • Great to swage stainless steel wire/rope up to 1/8th inch. Although our test show it will crimp 3/16th we do not warranty it for use on 3/16th but we always accept returns in the first 45 days. Easily make a wire rail fence around the deck, yard, or install new rigging in your boat. Anytime you're installing new steel cable this does the job with less effort..
  • Hydraulic tools allow for way more force from a much smaller package. It requires a 36" mechanical crimper/swage tool to compare to the force this tool generates. Imagine trying to crimp a battery terminal under the hood with one of those. Trust us this is better..
  • Our kit includes 8 different size die heads, these can be adjusted 180° to help accommodate tight spaces. Please note this tool requires very little effort to crimp. During our testing we had a lot of over-crimping. It should never feel like the crimp has to be forced. Especially important on the 00 electric or the 3/16th stainless..
Check Stock

Loos Cableware EY1-2X Stainless Steel Marine Eye End for 1/16\ Diameter Wire Rope

  • Stainless Steel Marine Eye Swage Fitting.
  • Type 316 Stainless for superior corrosion resistance even in salt water environments.
  • Convenient package of one fitting for 1/16" wire rope.
Check Stock

OTOM 18\ Rear Wheel Spokes Kit Stainless Steel For CRF250X 2004-2017 ,CRF250RX 2017-2020,CRF450X 2005-2020 ,CRF450RX 2017-2020 ,CRF450L 2019 (18\ Rear Wheel)

  • Replacement spokes sets for stock rims and hubs, front wheel uniform diameter design increases spoke strength over OEM..
  • Material : Spokes: stainless steel ,Nipples:stainless steel,High-quality compatibility and practical performance,has a good anti-corrosivenness.it's not easy to fall off the paint, and it's not easy to fracture.
  • Size:18" Rear Wheel Spokes Length: ouside:191mm,inside:196mm Thickness: 4mm.
  • 18“ Rear Wheel Spokes Fit for CRF250X 2004-2017 ,CRF250RX 2017-2020,CRF450X 2005-2020 ,CRF450RX 2017-2020 ,CRF450L 2019.
  • Quantity: 36 spokes and 36 nipples.Color: Silver Spokes+Silver Nipples.
Check Stock

48 Pack Swage Lag Screws Left & Right for 1/8\ Cable Railing kit,T316 Stainless Steel Stair Deck Railing Wood Post of Cable Railing Kit, Decking Railing Hardware, DIY Baluster Kit

  • 【LEFT & RIGHT DESIGN】 With the Left hand lag screws and Right hand Lag Screws design, it can rotate wire rope in the same direction, which resolves the problem of twisting the wire rope. Products without Left & right design might damage the cable. The wrench multi-tool is handy, it will help you drill the lag screw into the wood easily..
  • 【PROTECTOR SLEEVES】 These stainless steel protector sleeves will prevent the wire cable from wearing into the post, and maintain the cable rail tension for preventing wire rope vibration..
  • 【COMPATIBILITY】 These Cable Railing Kits are suitable for 1/8" diameter wire rope cable railing system, perfect for DIY your own wood baluster post stair or decking railing project, good for indoor or outdoor applications..
  • 【HIGH-QUALITY 】 Made of premium stainless steel for weather-tough durability, super-strong resistance to rust and corrosion, low maintenance and lasting beauty..
  • 【WHAT YOU WILL GET】 The cable railing kit includes 30 PCS left handed thread swage lag screws, 30 PCS right handed thread swage lag screws, 80 PCS protector sleeves, 2 PCS drill bits (The 6.5mm drill bit is used for drilling the protector sleeves holes, and the 5mm drill bit is used for drilling the lag screws holes), 1 PCS wrench..
Check Stock