Best Stainless Steel Swage Terminal
5pc Set - Stainless Steel T316 Lifeline Hand Swage Stud End Fitting- for 1/16 Cable
- Type 316 Stainless Steel Lifeline Hand Swage Stud End Fitting for Cable Railing- For 1/16" Cable.
- High Quality - Marine Grade For Maximum Corrosion Resistance.
- Cable Size: 1/16" - Thread: 1/4" - Thread Length: 1-7/8" - Overall Length: 4-3/16".
- Includes 5pcs - Each Piece Comes With: Stud, Nut, Washer & Cap Nut ( As Pictured).
- A Swage Tool Is Required For Crimping - Please See Our Amazon Storefront For Swaging Tool.
Check StockLoos Cableware 668-4X Stainless Steel Eye End for 1/8\ Diameter Wire Rope
- Convenient package of one swage fitting for 1/8" cable.
- 316 Stainless Steel Eye End for swaging on to Wire Rope.
- 316 Stainless Steel for superior corrosion resistance even in salt water environments.
Check StockLoos Cableware 667-8X Stainless Steel Fork End for 1/4\ Diameter Wire Rope
- Convenient package of one swage fitting for 1/4" cable.
- 316 Stainless Steel Fork End for swaging on to Wire Rope.
- 316 Stainless Steel for superior corrosion resistance even in salt water environments.
Check StockMuzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17
- Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
- Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
- Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check StockMuzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17
- Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
- Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
- Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock3/16\ Cable x 1/4\ Thread, Stainless Cable Railing Xtra Long Threaded Stud
- This product is a part of the HAAS Stainless Legacy Cable Rail System Dome Swage - 3/16 inch size, Stainless Steel, Type 316..
- Electro Polished! Using electricity in a tank of chemicals, the outer layer of the surface of the part is peeled away to expose the chromium molecules and that results in a shiny, corrosion resistant finish..
Check StockMuzata 20Pack 1/8' Black Swage Lag Screws Left & Right Black Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck NeatBlack System 10 Pairs CK17, CA7
- Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
- Clean Look and Durability-Muzata cable railing system with 1/8″ swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4″ sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
- Wide Application-These 1/8″ cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, ....
Check StockLoos Cableware MS20667-2 Stainless Steel Fork End for 1/16\ Diameter Wire Rope
- Stainless Steel Marine Eye Swage Fitting.
- Type 316 Stainless for superior corrosion resistance even in salt water environments.
- Convenient package of one fitting for 5/32" wire rope.
Check StockHilmor 1839022 Swage Expander Head - 1-1/8 HVAC Swage Tool and Pipe Bender Accessory
- SWAGE EXPANDER HEAD: A variety of heads available to make a picture-perfect swage.
- CORRECT SIZING: Find the size that works for you. Expander heads range from 3/8" to 1-5/8".
- COMPATIBLE: Use with hilmor's Compact Swage Tool and Pocket Size Deburring Tool.
- VERSATILE: For use with soft metals - Copper, Steel, Aluminum, Brass tubes.
Check StockLoos Cableware EY1-2X Stainless Steel Marine Eye End for 1/16\ Diameter Wire Rope
- Stainless Steel Marine Eye Swage Fitting.
- Type 316 Stainless for superior corrosion resistance even in salt water environments.
- Convenient package of one fitting for 1/16" wire rope.
Check StockMuzata 10Pack Invisible Cable Railing Kit 1/8 Swageless Terminal Flat Head Hidden for 2 x2 Metal Post Deck Stairs NiceView System CB06,CV2 CL1
- ...cable railing hardware is irreparable after swaging with wire rope if you get a wrong measurement or need adjustment. However, this lag screw can be reused by unscrewing the jackscrews and adjusting the cable length whenever you want to remeasure or rebuild.
- Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
- Pre-Designed System - We pre-designed a NiceView cable railing system to help you get a fully customized project, including cable railing kits CB05 CB06 CB17, protector sleeves CR72 CR66, angled washer CR60, stainless steel cable WR02, cable cutter CR12, socket wrench CT16,posts PS01 PS02, handrails HT10, handrail connectors (HA01 HA02 HA23 HA24. (Please note that package ONLY contains contents as stated in bullet point 1, other stuff mentioned is NOT included).
- Why Choose Us - MUZATA has helped millions of families with their cable railing projects during the past years. We believe that home renovation should be easy and affordable. So we work with every effort to provide quality products and professional service, to make Muzata a reliable brand. Need professional one-stop cable railing solutions....
Check Stock48 Pack Swage Lag Screws Left & Right for 1/8\ Cable Railing kit,T316 Stainless Steel Stair Deck Railing Wood Post of Cable Railing Kit, Decking Railing Hardware, DIY Baluster Kit
- 【LEFT & RIGHT DESIGN】 With the Left hand lag screws and Right hand Lag Screws design, it can rotate wire rope in the same direction, which resolves the problem of twisting the wire rope. Products without Left & right design might damage the cable. The wrench multi-tool is handy, it will help you drill the lag screw into the wood easily..
- 【PROTECTOR SLEEVES】 These stainless steel protector sleeves will prevent the wire cable from wearing into the post, and maintain the cable rail tension for preventing wire rope vibration..
- 【COMPATIBILITY】 These Cable Railing Kits are suitable for 1/8" diameter wire rope cable railing system, perfect for DIY your own wood baluster post stair or decking railing project, good for indoor or outdoor applications..
- 【HIGH-QUALITY 】 Made of premium stainless steel for weather-tough durability, super-strong resistance to rust and corrosion, low maintenance and lasting beauty..
- 【WHAT YOU WILL GET】 The cable railing kit includes 30 PCS left handed thread swage lag screws, 30 PCS right handed thread swage lag screws, 80 PCS protector sleeves, 2 PCS drill bits (The 6.5mm drill bit is used for drilling the protector sleeves holes, and the 5mm drill bit is used for drilling the lag screws holes), 1 PCS wrench..
Check StockCrosby 1045096 Shoulder Nut Eye Bolts, Forged Carbon, Galvanized, 3/8\ x 2-1/2\
- Convenient package of one swage fitting for 3/16" cable.
- Stainless Steel Fork Fitting for swaging on to Wire Rope and Aircraft Cable.
- Follow manufacturer's swaging instructions.
Check Stock