Categories

Best Stainless Steel Welding Clamps

TRRAPLE Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, 2/4 Pcs Durable Stainless Steel Tab Holder Corner Butt Welding Panel Clamps Tools

  • HIGH QUALITY WELDING CLAMPS -- Our v-type magnetic welding clamps are made of made of high quality stainless steel, sturdy and durable, can be used for a long time..
  • MAGNETIC HOLDERS -- One rare earth magnets in each pad provide secure gripping power for rapid, and convenient, holding and positioning..
  • EASY TO USE -- Pads pivot to hold onto round, square, or flat metal surfaces, easy to install and apply..
  • PERFECT SPOT WELDING CLAMP -- Hold tabs, gussets, plates and odd shaped pieces in position for tack welding..
  • WIDELY APPLIED -- Widely used on doors, tool boxes, windows, wooden case, furniture and so on..
Check Stock

Rough Country Dual Cat-Back Exhaust for 2009-2021 Tundra | 4.6L/5.7L - 96012

  • Dual Cat Back Design with Side and Rear Exit..
  • Corrosion Resistant 409 Stainless Steel | 16 Gauge Tubing | 409 Stainless Black Muffler and Clamps..
  • Dual Wall Stainless Steel 304 Black Tips..
  • Installs into OEM Hangers | No Welding | Easy at Home Installation..
  • Backed by Rough Country's Limited Lifetime Replacement Warranty..
Check Stock

Rough Country Dual Cat-Back Exhaust for 2009-2014 F-150 2WD/4WD | V8-96010

  • Dual Cat Back Design with Side or Rear Exits..
  • Corrosion Resistant 409 Stainless Steel | 16 Gauge Tubing..
  • Dual Wall Stainless Steel 304 Black Tips | 409 Stainless Black Muffler and Clamps..
  • Installs into OEM Hangers | No Welding | Easy at Home Installation..
  • Backed by Rough Country's Limited Lifetime Replacement Warranty..
Check Stock

Rough Country Dual Cat-Back Exhaust for 09-13 Chevy/GMC 1500 | 4.8L/5.3L - 96008

  • Corrosion Resistant 409 Stainless Steel | 16 Gauge Tubing..
  • Dual Wall Stainless Steel 304 Black Tips | 304 Stainless Black Muffler and Clamps..
  • Installs into OEM Hangers | No Welding | Easy at Home Installation..
  • Backed by Rough Country's Limited Lifetime Replacement Warranty..
Check Stock

4Pcs 4' 50 LB Welding Magnets and Clamps Metal Working Mig Tools and Equipment Magnetic Welding Holder Clamps Workshop Welder Soldering, 45, 90, 135 Degree Angle Magnet Arc Welding Electrode Holders

  • STRONG POWER: Spurtar Angle Welding Magnet can hold and support any ferrous metal objects up to 50 lbs. These heavy-duty arrow magnets stick solidly and ensure a hand free welding while the bright red color will help you locate it more easily..
  • SAFE & SECURE: These magnetic welding holders grip metal and hold it at the angle you need to work safely and efficiently. The welding holders are compact with durable high gloss enamel end plates.
  • THREE ANGLES: Heavy-duty arrow design steel magnet supports material at 45°, 90°, and 135° for easy access. Can be used as double sided holder for welding, assembly and marking work.
  • MULTIPURPOSE: These welding magnets and clamps connect parts, freeing up your hands for efficanciacy work and improve work safety, and it can also be used as a floater to separate steel plates.
  • PREMIUM WELDING TOOL: Made of high-quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion. Spurtar Magnet Holder Makes your welding job more efficiently and precisely..
Check Stock

Rough Country Dual Exhaust (fits) 2019-2020 Chevy Silverado GMC Sierra 1500 | 5.3L | Stainless Steel | Black | 96011

  • Corrosion Resistant 409 Stainless Steel | 16 Gauge Tubing | 304 Stainless Black Muffler and Clamps..
  • Dual Wall Stainless Steel 304 Black Tips | Can Retain your OEM Dual Tips..
  • Installs into OEM Hangers | No Welding | Easy at Home Installation..
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

DNA MOTORING CBE-HC06EX-BT Catback Exhaust System [for 06-11 Honda Civic EX/LX/DX]

  • COMPATIBILITY -- Designed for Jeep Wrangler JK.
  • see product information for compatibility and engine specs.
  • PERFORMANCE UPGRADE -- Enhance your vehicle’s exhaust system with this kit that can give a 14HP and 12-Lb. Ft. torque improvement.
  • COMPLETE SOLUTION -- Includes DynoMax Super Turbo muffler, 3-in. stainless-steel tips and clamps.
  • EASY TO INSTALL -- Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn’t require specialized fabrication and/or welding.
  • IMPROVED FLOW CAPACITY -- Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power.
Check Stock

85mm C Clamp Tiger Clamp Woodworking Clamp Heavy Duty C-clamp With Wide Jaw Openings，2PCS

  • ...ze】38*30*85MM/1.5*1.2*3.34Inch（L*W*H）. the clamping thickness is about 50-77mm/2.0-3.07inches， There is an M10 threaded hole.The thread on the screw allows it to slide smoothly without sticking or binding..
  • 【Heavy Duty C-clamp】 C-clamps are made of high-quality stainless steel with coated surface, corrosion-resistant and rust-proof, strong and not easy to break； I-beam design provides sure strength, ensure a firm grip while the clamped object not easily deform..
  • 【Wide range of applications】C-type clamps are powerful and versatile, and can fix parts for assembly, fastening, bonding and welding. Widely used in furniture manufacturing, metalworking and home 、automotive applications, this reliable metal C clamps can ensure that everything is in the right place..
  • 【Convenient to Use】Tiger Clamp with adjustable positioning screws, which can be adjusted according to needs, can be easily clamped on any desktop and wooden strips, with strong clamping force and easy to use..
  • 【Worry-Free Warranty】 if you are not satisfied with the Stainless Steel C Clamps or have an....
Check Stock

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds. The welding hammer is a durable tool for long strokes. It can also be used as a life hammer and broken ice hammer.
Check Stock

Mellcom CT520D Welding Machine 50Amp Plasma Cutter, 200Amp TIG Welder 3 in 1 Multifunctional TIG/MMA/Plasma Cutter, 110/ 220V Dual Voltage 1/2 Inch Clean Cut with LCD Display

  • ... performs well in the high-frequency working section, and the frequency can reach more than 300kHZ. MOSFET power device with unique control mode improves the reliability of the welding machine..
  • SUPPORTS 3 WELDING MODES: Perfectly applied to the three electric welding functions of TIG/ MMA/ PLASMA, allow you to weld stainless steel, alloy steel, and carbon steel and other nonferrous metals. Connect the wires to different interfaces (operate according to the product manual) , Each welding mode can work effectively in 110V/220V voltage environment. This multifunctional electric welding machine meets various daily needs..
  • PORTABLE & USABLE TOOL: This welding & cutting equipment is small, compact in structure, and has excellent current output performance. Lightweight 32 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project..
  • WHAT YOU GET: We have equipped this electric welding machine with more excellent product accessories-1 x Argon arc welding torch, 1 x PT-31 cutting torch, 1 x 300A welding torch, 1 x 300A grounding clamp, 1 x Oil-water separator, 4 x Hose clamps, 2 x Copper streets, 2 x Nozzles, 2 x Electrodes, 1 x English manual..
  • QUALITY ASSURANCE: We will provide quality assurance for every product. In ....
Check Stock

Borla Challenger R/T '15 5.7L V

  • Fits 2008-2014 Dodge Challenger R/T 5.7L V8's.
  • Includes X-pipe, slip-fit tailpipes, stainless band clamps, hangers, insulators, double box tips & Violator mufflers.
  • Powder coated black stainless steel tips.
  • No cutting or welding is required to install onto applicable vehicles.
  • Increases horsepower by 10-18 & adds the Violator sound to your exhaust.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock