Categories

Best Stainless Steel Wire Die

Ram-Pro Stainless Steel Wire Brush for Power Drill Impact Brass Driver - Cleaning Brush Hex Shank

  • ✓ THIS PRODUCT: Is Suitable for multiple uses. Keep one in your car, garage, office and kitchen With 100% satisfaction. Unique power tool accessory for cleaning, polishing, paint/rust removal.
  • ✓ Specifications: 5/8"-diameter x 2" brush, fine all-stainless steel wires, 1/4" quick-change hex shank fits power drills, impact drivers, die grinders, Length overall 4-3/4".
  • ✓ Quality: The finest quality Brushes to give you long service on the toughest cleaning jobs. These cup brushes are ideally suited for cleaning castings, structural steel and sheet metal. Durable Material: Stainless steel + Brass copper, strong and durable, can clean rust and detail completely, Hang-up hole for convenient storage..
  • ✓ Design: Designed for easy access into narrow holes and confined areas, Designed for use on right angle grinders. welding wire brushes are suitable for cleaning steel parts, machinery, the unfinished metal parts, paint stains, special corrosion without damaging surfaces or fine features.
  • ✓ USES: Innovative spiral knotted wires construction for a narrow face and precision deburring, rust, spatter and paint removal, surface conditioning and preparation. Wire brushes are made of brass, stainless steel, strong and durable, can clean rust and d....
Check Stock

Senmit 10 Ton Hydraulic Cable Crimper Hand Tool for 1/8, 3/16 Stainless Steel Cable Railing Fittings, Heavy Duty Head, Come with 8 Pairs Dies and Cable Cutter

  • ...tter, 8 dies (Comes with crimping dies for 12 AWG, 10 AWG, 9 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG and 2/0 AWG) and a portable, heavy-duty storage case..
  • 【CAPACITY】: This industrial lug crimper has a true 10 US ton capacity, being designed for 1/8 (6 mm Die) 3/16 (10 mm Die) stainless steel cable railing and aluminum or copper wire, providing perfect crimp terminations with every use..
  • 【HEAVY DUTY DURABLE CONSTRUCTION】: The head of crimper is made of durable steel with stainless steel coating, strength and good toughness. The Oxide Crimp Head and Dies won't chip or flake. Dies are made of more hardened 40cr steel, this cable crimper is much better than classic chrome-plated models, for an enhanced performance..
  • 【WIDE APPLICATIONS】: Whether for battery and welding cable, building wiring, crimp heavy cast terminal lugs, this premium quality hydraulic cable crimper will do an outstanding job..
  • 【EASY TO USE】: 4 steps to perfect crimping: install the die set that matches your terminal size, rotate the release valve in order to close it, pump the handle until the resistanc....
Check Stock

60 Pieces Wire Cup Brush Set,Vankcp Power Rotary Tool Buffing Wheels Small Wire Brushes Set for Drill Grinder Rotary Tools

  • Sturdy material:Made of stainless steel, durable for a long service life, steel wire brush set can use for many different types of wood, metal materials,polishing,castings,structural steel,sheet metal and grinding all kinds of rough surface..
  • Designed for easy access into narrow holes and confined areas. crimped style for light to medium duty applications, removes rust, scale and paint in hard to reach areas.hardened wire cleaning brush for reducing wire breakage..
  • Applications: These brushes can remove brass, copper, gold burrs, rust, dust, removing the oxide layer, scale and paint in hard to reach areas,so great for cleaning your car, garage, office kitchen and ect..
  • Use for many types of drill: Great use for Dremel and Foredom tool, angle grinder, electric drill, door knobs, automobile parts and die grinders ect..
  • Package Included: 20 Pcs bowl-shape wire brush set, 20 Pcs pen-shape wire brush set, 20 Pcs T-shape wire brush set. Also comes with a durable plastic case for easy storage of these mini Wire Brush Wheels..
Check Stock

Bore Brush Bronze Bore Brush Bore Cleaning Brush Set Wire Bore Brush Set Stainless Steel Cleaning Brush for Power Drill Impact Driver 12 Pieces,Multi Sizes

  • What will receive: there are stainless steel cleaning brushes and brass cleaning brushes with different sizes, all of them have 1/4 inch hex shank,....
  • Scientific design: bore brush offers easy access into narrow holes and confined areas, designed for use on right angle grinders.
  • Quality material: bore cleaning brushes are made of stainless steel and brass copper, strong and sturdy, can clean rust and detail completely.
  • Specification details: the drill wire brush is 1/4 inch hex shank fits for power drills, impact drivers, die grinders, the overall length is 4-3/4....
  • Multiple application: you can keep wire bore brushes in your car, garage, office and kitchen, and the bore brushes are suitable for cleaning,....
Check Stock

Wire Crimper Tool Qibaok Ratcheting Insulated Wire Terminal Connectors Crimping Tool for AWG20-10

  • CRIMPING WIRE SIZE AWG20-10:Steel jaw contains color-coded wire size markings for red (20-16 AWG), blue (16-14 AWG), and yellow (12-10 AWG) terminals..
  • HIGH QUALITY MATERIAL:This Wire crimping plier kit is made of high quality Alloy steel. It is a high strength hand tools for your home improvement..
  • RATCHETING DESIGN:There is a ratcheting mechanism design for this Insulated terminals crimping tool, one-hand operation could make a perfect crimp. And you can take less strength..
  • DOUBLE CRIMPING DIE:Double crimping die creates a secure crimp that resists pull-out.Ratcheting function allows you to secure a wire connector in the die before inserting the stripped wire into the barrel..
  • QUICK RELEASE LEVER:Quick release lever frees the crimper jaws in any position and when double crimp is complete, acts as a built-in safety measure that can open the handles whenever tool is jammed or stuck..
Check Stock

8 Pieces Wire Brush Drill Bore Cleaning Brush Set with 1/4 Inch Hex Shank Stainless Steel Wire Twisted Brush for Drill Impact Driver, 8 Sizes

  • Package contains: you will get 8 pieces of stainless steel cleaning brushes with 8 different sizes, all of them have 1/4 inch hex shank, which can be applied on ports, tubes, bearings and other common wire brush applications, enough quantity for your need.
  • Quality materials: these bore brushes are made of stainless steel and brass copper, strong and durable, which can clean rust and detail completely.
  • Twisted wire is for increased cleaning action, durable and abrasive.
  • Size details: the drill wire brush is 1/4 inch hex shank fits for power drills, impact drivers, die grinders, the overall length is about 4-3/4 inch, and 8 kinds of width includes 8, 9, 10, 11, 13, 15, 17 and 19 mm, so you can choose the suitable size to use according to your needs.
  • Multiple functions: this bore cleaning brush can access into narrow holes and confined areas easily, designed for use on right angle grinders, also suitable for cleaning steel parts, machinery, the unfinished metal parts, paint stains, corrosion without damaging surfaces or fine features.
  • Suitable occasions: these wire bore brushes can be applied in your car, garage, office and kitchen, nice for cleaning, polishing, painting, or rust removal in automotive, fabrication, machining and smiting applications and mor....
Check Stock

2 Pack Wire Wheel Brush Wire Wheel Brush for Drill Attachment, Rocaris 2 Inch Heavy Duty Wire Brushes Removal Paint Rust & Corrosion, 0.0118" Carbon Steel Wire, 1/4in Shank, 20000RPM

  • ... 0.0118" Thick Industrial Brush: Abrasive drill wire brush wheel is designed to work with die grinders to ensure seamless surface cleaning and material removal. This finishing steel brush power drill parts accessories features crimped wires with high density for maximum brushing action. The stainless steel carbon wire of the drill brush uses 0.0118 Inch crimped steel wire. Avoid Breaks and Deformations..
Check Stock

Hydraulic Cable Crimper and Swage Tool. Great for Crimping Battery Lugs, Large Electric Cables or Swaging Stainless Steel Cable/Rope.

  • ...imp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job done..
  • Can crimp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job done..
  • Great to swage stainless steel wire/rope up to 1/8th inch. Although our test show it will crimp 3/16th we do not warranty it for use on 3/16th but we always accept returns in the first 45 days. Easily make a wire rail fence around the deck, yard, or install new rigging in your boat. Anytime you're installing new steel cable this does the job with less effort..
  • Hydraulic tools allow for way more force from a much smaller package. It requires a 36" mechanical crimper/swage tool to compare to the force this tool generates. Imagine trying to crimp a battery terminal under the hood with one of those. Trust us this is better..
  • Our kit includes 8 different size die heads, these can be adjusted 180° to help accommodate tight spaces. Please note this tool requires very little effort to crimp. During our testing we had a lot of over-crimping. It should never feel like the crimp has to be forced. Especially important on the 00 electric or the 3/16th stainless..
Check Stock

Lichamp Stainless Steel Cable Crimper Hex Lug Tool Hydraulic Hand Crimping Swaging Tool for Dteel Eire Rope 1/8 and 3/16 inch

  • STEEL CABLE SWAGER - Hand held hydraulic crimping tool with multi-size dies is great for crimping the stainless steel sleeve fittings of cable railing....
  • WIDE APPLICATION - Come with 9 pairs of the LUG TYPE crimping dies. Customized for swaging 1/8 inch(4 mm Die) or 3/16 inch (8 mm or 10 mm Die)....
  • POWER WIRE CRIMPER - Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Good choice for battery and welding cables, power wires, electrical....
  • LONG LASTING MATERIAL - All swaging dies were made of durable carbon steel and coated with chrome finish, high strength and good toughness..
  • EASY TO OPERATE - It is equipped with quick switch, C shape head and rubber-coated soft handle. Complete your swaging project smoothly in seconds..
Check Stock

Hamilton Beach Commercial CPM800 8 Quart Stand Mixer Die-Cast Aluminum Black

  • Tilt-back head: Lifts for quick and easy attachment changes and bowl removal. Makes adding ingredients and scraping the sides of the bowl much easier..
  • All-metal gears: Tough all-metal gears vary speed and torque for all three attachments..
  • 8 quart/ 8 L stainless steel bowl: Equipped with 2 handles to let you securely carry contents..
  • Heavy-duty attachments: Stainless Steel. Built to last, the dough hook, beater, and wire whisk all have splash shields to keep ingredients away from....
  • Die-cast aluminum body: Smooth, sleek and built to endure years of us. The surface easily wipes clean..
Check Stock

Woodford 22PX-4-PH Horizontal Freezeless Wall Faucet Provides Hot And Cold Water

  • Oval powdercoated die cast aluminum handle.
  • Stainless steel seat eliminates wire draw.
Check Stock

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock