Categories

Best Stainless Tube Fittings

Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10

  • Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
  • Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
  • High Quality Material: The connector made of high quality plastic and stainless steel.
  • corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
  • Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
  • Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..
Check Stock

ASD 3/16 and 1/4 Brakeline fittings kit nuts unions compression fittings 70 Pieces

  • Auto Supplies Direct (70) Piece 3/16″ & 1/4″ Brake Line Fittings Kit (3/16″ and 1/4″ Tube Nuts, Unions, and Compression Fittings) for Cars and Trucks.
  • Contains a (30) Piece 3/16″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 3/16″ Short Tube Nuts, (10) 3/16″ Long Tube Nuts, and (10) 3/16″ Unions.
  • Contains a (30) Piece 1/4″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 1/4″ Short Tube Nuts, (10) 1/4″ Long Tube Nuts, and (10) 1/4″ Unions.
  • Contains (5) 3/16″ OD Compression Brake Line Fittings.
  • Contains (5) 1/4″ OD Compression Brake Line Fittings.
Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • 【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check Stock

Brake Line Fittings - MuHize 32 PCS Brass Brake Line Fitting Kit for 3/16\ and 1/4\ Inverted Flares Brake Line Tube

  • PACKAGE INCLUDE -Part 1: MuHize upgraded 16 Fittings for 3/16”Brake Line: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
  • ② 10 x 3/16" (3/8-24) Inverted Tube Nut.
  • ③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
  • ④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
  • PACKAGE INCLUDE - Part 2: MuHize upgraded 16 Fittings for 1/4”Brake Line: ① 2 x 1/4”(7/16-24) Inverted Tube Nut.
  • ② 10 x 1/4” (7/16-24) Inverted Tube Nut (Long).
  • ③ 2 x 1/4”(9/16-18) Inverted Tube Nut.
  • ④ 2 x 1/4”(1/2-20) Inverted Tube Nut.
  • Note：The nut threads are regular 1/4 inch tube fitting size. Please check before shopping!.
  • HIGHER QUALITY - MuHize brake line fittings are made of durable material with unique rust corrosion proofing technology..
  • WIDELY APPLICATION - MuHize 3/8' - 24 or 7/16-24 threads fittings commonly fits for regular inverted flare/ double flare sizes for 3/16 or 1/4 inch brake lines tube..
  • PROFESSIONAL - MuHize focus on outstanding features and benefits of braking line. 100% brand new & made from excellent materials, and good contact..
Check Stock

EilxMag DOT Brass Air Line Quick Connect Fittings, PBT Push-To-Connect-Fittings NPT Male Thread & Brass Air Brake Line Fittings Kit (Pack of 44)

  • 【Premium Material】: Our dot air line quick connect fittings are made of PU, Plastic, the air line fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
  • 【Quantity】: Unique dot air fittings assortment: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The air hose kit fittings are suitable for PU / PA / PE / PVC. The air brake fittings assortment kit can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Quick disconnect simply push tubing in, no to....
Check Stock

CEKER 1/2 Npt Elbow Push to Connect Fittings 3/8 inch Tubing to 1/2 npt Airline Push Fittings 3/8 Push in Connectors Quick Connect Air Tube Fittings 90 Degree Pneumatic Fittings 2Packs

  • Type:3/8 Od x 1/2" Npt Thread Push to Connect Fittings.
  • Made of quality plastic and stainless steel.
  • 3/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • Working Temperature: 0-60°C | 32～140°F.
  • The 1/2 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly.
  • Easy to install to 3/8 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely.
  • The release ring of Pneumatic Air Tube 3/8 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
Check Stock

SavvyCraft 4 Bow Bimini Replacement Top Canvas Cover4 Bow 96\ L 54\-60\ W Black Color

  • *Upgraded Bimini Top Parts - Casting from marine grade 316stainless steel , this external eye ends for bimini top fittings works for 7/8'' OD round tubes. Upgraded outside eye ends that stands up over time is a perfect choice to replace your plastic, nylon or broken fittings..
  • *Heavy Duty Stainless Steel - Stainless eye ends are well-built and highly polished for ultimate using. They are corrosion resistant, anti-rust, providing more durable solution for salty water environment..
  • *Easy to Install - Marine boat fittings are easy to assemble and install.Simply assemble jaw slide with eye ends to join the bimini top frame, then tighten screws to secure the inserted poles in place..
  • *Durable Design - 7/8’’ external eye end has shining polished looking and smooth touch, combining the modern design . Bringing this marine hardware for your lovely bimini will definitely surprise you for its outstanding product experience..
  • *Choose Right Size - Fits for 7/8'' OD round tube. One screw on each fitting measured 1/4''. the detail size refer to the left picture.Perfect replacement for marine hardware, widely used for boating, kayak, canoe, yacht,etc..
Check Stock

Utah Pneumatic Straight 1/4” Od Air Line Union push air fitting Quick Connect Fittings pneumatic push connect fittings Air Tube Fitting 10 Pack

  • straight pneumatic fitting : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
  • Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
  • Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
  • You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
  • All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.
Check Stock

A-Team Performance - Brake Line Fittings Kit for Inverted Flares — 19 Fittings for 3/16 Tube and 16 Fittings for 1/4 Tube — Zinc-Coated Adapter, Pack of 35

  • Brake Line Fittings Kit for Inverted Flares — 19 Fittings for 3/16 Tube and 16 Fittings for 1/4 Tube — Zinc-Coated Adapter, Pack of 35.
  • For 3/16" tube there are a total of 19 fittings (12 x 3/8"-24, 3 x 7/16"-24, 2 x 1/2"-20 and 2 x 9/16"-18).
  • For 1/4" tube there are 16 fittings included (12 x 7/16"-24, 2 x 1/2"-20 and 2 x 9/16"-18).
  • Many local parts stores rent out flaring tools free.
Check Stock

LitKiwi Draft Beer Line with Connectors,Part of Kegerator Kit,5 Feet-Clear Vinyl Tubing Hose 5/16'ID 7/16' with Stainless Steel Barb Fitting,for Beer Tap Tower Keg Homebrewing

  • ★【Great Marterial】^^The Fitting—made of 304 High quality stainless steel with Swivel Nuts and Clamps which is durable and portable.^^The Tube—made of Food grade Vinyl Line,soft and smooth, durable and anti-kinking, safe and non-toxic..
  • ★【General Size】^^The Fitting—Both are 5/16" barb and the threads both are 5/8" G.Fit for most of the draft beer accessories.^^The Tube—ID:5/16 inch,OD:7/16 inch,Length:5 feet or 10 feet,work with the barb fittings..
  • ★【Wide Application】The tube and fittings kit are ideal for general use such as beer brewing, kegerator, wine making.Can be used with most commercial barbed fittings and connectors.The Beer line gives your beer a reliable connection from the back of your shank right to the keg coupler..
  • ★【Easy & Efficient】This kit ensures a proper connection of your beer lines to your draft system. Installation is easy and can be done within minutes.And two worm clamps will guarantee no beer leaks..
  • ★【Package Include】5' Length of clear 5/16”inside diameter beer line & 1pcs straight fitting & 2pcs clamps..
Check Stock

LitKiwi Draft Beer Line with Connectors,Part of Kegerator Kit,10 Feet-Clear Vinyl Tubing Hose 5/16'ID 7/16' with Stainless Steel Barb Fitting,for Beer Tap Tower Keg Homebrewing

  • ★【Great Marterial】^^The Fitting—made of 304 High quality stainless steel with Swivel Nuts and Clamps which is durable and portable.^^The Tube—made of Food grade Vinyl Line,soft and smooth, durable and anti-kinking, safe and non-toxic..
  • ★【General Size】^^The Fitting—Both are 5/16" barb and the threads both are 5/8" G.Fit for most of the draft beer accessories.^^The Tube—ID:5/16 inch,OD:7/16 inch,Length:5 feet or 10 feet,work with the barb fittings..
  • ★【Wide Application】The tube and fittings kit are ideal for general use such as beer brewing, kegerator, wine making.Can be used with most commercial barbed fittings and connectors.The Beer line gives your beer a reliable connection from the back of your shank right to the keg coupler..
  • ★【Easy & Efficient】This kit ensures a proper connection of your beer lines to your draft system. Installation is easy and can be done within minutes.And two worm clamps will guarantee no beer leaks..
  • ★【Package Include】10' Length of clear 5/16”inside diameter beer line & 1pcs straight fitting & 2pcs clamps..
Check Stock

2pcs Compression Tube Fitting Adapter, Stainless Steel Straight Adapter, Double Ferrule Joint Connector, for Connecting Pipes Fittings(Ф6-Ф14)

  • 【Reasonable Design】The quick-screw design of the sleeve has good air tightness and is not easy to leaking..
  • 【High-quality Materials】The tube fitting adapter is made of 304 stainless steel, which is resistant to rust and corrosion..
  • 【Good Fixability】The design of the middle card board of the compression tube fitting adapter can be fixed without shaking..
  • 【The Scope of Application】The tube fitting double ferrule joint connector is an adapter used to connect different types of pipes or fittings..
  • 【Easy to Install and Disassemble】The stainless steel compression tube fitting adapter can be quickly installed and removed, making it more convenient to use..
Check Stock

Utah Pneumatic Push To Connect Air Fittings Tube 3/8\ Od Straightair Air Line Union Push Fit Fittings Tube Fittings Air Line Push Connectors 10 Pack(3/8 Straight)

  • Air Line Quick Disconnect : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
  • Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
  • Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
  • You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
  • All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.
Check Stock