Categories

Best Standard Ballasts Electromagnetic Ballasts

DDM Tuning Plus 55W HID Kit，Slim ballasts with Ultra bulbs H11 5500K

  • The DDM Plus Kits use our Ultra HID Bulbs and premium HID Ballasts..
  • BALLASTS: The DDM Plus Ballast is an improved version of our standard DDM slim ballasts. The Plus ballasts require less power to ignite the bulbs,....
  • ULTRA HID BULBS: Our Premium Ultra HID bulbs are quite simply the best..
  • KIT INCLUDES: 2 x DDM Plus HID Ballasts, 2 x Ultra HID Bulbs, 2 x Application Specific Adaptor Cables.
  • WARRANTY: As always our HID kits come with a LIFETIME WARRANTY..
Check Stock

DDM Tuning HID Xenon AC Slim Replacement Ballast 35W For All Bulbs

  • Upgrade either your OEM 35 Watt ballasts OR existing aftermarket HID ballasts with our 35 W ballasts.
  • Great for brightening your 35 W HID system.
  • Easily exchanges with quick attachment plug-and-play style connectors.
Check Stock

YDC 2X D2 D2S D2R D2C HID Xenon Bulb Adapters Wire Harness Connector Cable Socket for Replacement Ballast Application,Retrofit Project Headlight,Fog Lamp Red

  • These adapters make it possible for aftermarket bulbs to be connected to D2S ballasts.
  • These are D2 Adapters For reusing your OEM type D2s/D2r/D2c bulb on your oem equipped hid headlights.
  • REUSING YOUR BALLASTS: These will save you some money and allow the use of D2S bulbs with your aftermarket HID ballasts. Works with 99 percent of....
  • INDUSTRY STANDARD: These are built to industry standard specifications for AMP male/female high-voltage outputs, and 'D2S' bulbs. They should work....
Check Stock

Robertson 3P20158 ISL296T12MV Fluorescent eBallast for 2 F96T12 Linear Lamps, Instant Start, 120-277Vac, 50-60Hz, NBF, HPF (for HO lamp Applications The Recommended Ballast is The PSB296T12HOMV)

  • ENERGY EFFICIENT BALLAST: These patented electronic instant start ballasts turn the power of light savings from store shelves to installation site. These ballasts are among the most energy efficient.
  • ENERGY EFFICIENT BALLAST: These patented electronic instant start ballasts turn the power of light savings from store shelves to installation site. These ballasts are among the most energy efficien.
  • VERSATILE BALLASTS: This ballast operates both standard and energy saving lamps orientation. The t8 ballast instant starts to operate instantly with a voltage power between 120-277 volts. It is well-known for its thermal stability, toughness, and non-conductive qualities while operating at such voltages..
  • UL LISTED: This ballast enhances any home with a trendy style. When a product is UL-listed, it means that it has been verified as safe to use by UL. Our t8 fluorescent ballast is certified by UL as well which is extremely safe to use and this provides 100% customer satisfaction..
Check Stock

XtremeVision DC 35W HID Xenon Premium Slim Ballast Pair - 2 PCS

  • XtremeVision HID Replacement Ballasts are compatible with 35W & 55W Bulbs. Compatible with most aftermarket HID Lights (Please check bulb connectors....
  • HID Replacement Ballasts require HID bulbs to work. HID Ballasts will not operate without the bulb. Compatible with both DC and AC HID Bulbs.
  • 100% Plug and Play Installation. No Modification Required. Allows HID Bulbs to be 3X Brighter than Halogen Bulbs. Lasts 5X Longer. 35% Less Power....
  • XtremeVision Ballasts includes: (2) HID Xenon Replacement Ballast (2) Mounting Bracket & Zip Ties.
  • 2 Year Hassle Free Warranty - Live Tech Support via Phone & E-Mail.
Check Stock

DDM Tuning HID Xenon AC Ultra 35W D3S Replacement Ballast

  • Do you need to replace one of your factory D3S ballasts but the thought of going to the dealer scares you? If so, check out our new Ultra D3S....
  • The DDM Tuning Ultra D3S HID ballasts have been improved to require less current on startup to protect the factory wiring and to extend the life of....
  • All D3S ballasts come with a universal 9006 style input connector which you might want to consider to get a H1/H7 to 9006 adaptor cable to slice into....
  • These ballasts are virtually bulletproof and are designed to last 10-15 years..
Check Stock

DDM Tuning HID Xenon AC Slim Replacement Ballast 55W for All Bulbs 1 Year Warranty

  • Upgrade either your OEM 55 Watt ballasts OR existing aftermarket HID ballasts with our 55 W ballast.
  • Great for brightening your 55 W HID system.
  • Easily exchanges with quick attachment plug-and-play style connectors.
Check Stock

Eye Hortilux HX91340 1000W Gold E Ballast 120/240 Grow Lighting 120/240V

  • Eye Hortilux Gold Series e-ballasts - provide consistent, stable power to the lamp for high intensity and a quality spectrum. Included: 120/240V Eye....
  • Eye Hortilux ballasts provide a consistent power supply to your grow lamps. This allows your hortilux grow lamps to do what they were designed to do,....
  • Grow lamps are responsible for providing quality light to your garden. Ballasts are responsible for providing the power to your grow lamp..
  • Item Package Dimensions: 14.5" L x 9.25" W x 5.0" H.
Check Stock

Dimmable LED Edison Light Bulb, G25 (G80) Globe Bulb, 60W Equivalent, 5000K Daylight, Christmas Light, E26 Standard Base, UL Listed, 6-Pack

  • Directly relamp and replace the 85 watt fluorescent bulb F72T12/HO without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
  • All plastic diffuser for better light distribution, less spot reflections. O Rings to waterproof rotating caps and sealed diffuser for indoor and outdoor applications.
  • Energy saving of 51% from 85 watts to 42 watts with 4620 lumens output (S), Energy saving of 36% from 85 watts to 54 watts with 5940 lumens output (D).
  • T12 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
  • 2-year, warranty does not require registration.
  • however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
Check Stock

Phantom PHB4035 Commercial 1000W Double-Ended Digital HPS, 277V/347V Ballast

  • Phantom double-ended technology drives maximum PAR value! The engineering excellence of Phantom ballasts is now incorporated into our new Phantom Commercial DE ballasts. Their high-frequency design is optimized for double-ended 1000W HPS lamps, and they feature highly precise microprocessors..
  • They are totally silent, efficient and effective. This model, PHB4035, is capable of 277V and 347V operation, is generator-ready and FCC-compliant, and comes with instructions and an 8-foot power cord (with bare wires.
  • 277V and 347V plug options are available from Hydrofarm)..
  • FEATURES: High-precision microprocessor control, Robust commercial design, Superior reliability, Internal RF shielding, Patented ignition control, Auto-restrike feature protects valuable lamps from damaging power interruptions, Cooling fins for maximum heat dissipation, Suitable for use in damp locations, Comes with 8′ hard-wired power cord (no plug installed), 1000W output, FCC-compliant, CSA-certified..
  • Please note that this model does not have wattage output control (dimming) and is not PX1-compatible. Remote (detached) use of reflectors with Phantom ballasts from the 40 Series line should only be done with Hydrofarm brand reflectors having a built-in 15′ cord..
Check Stock

NYLL - 18 Inch/ 18' Plug & Play LED Tube – Daylight (6000K) T8 LED Lamp Directly Relamp & Replace 15W Fluorescent Bulbs F15T12, F15T8, FO13/865 (Without rewiring or Modification) - Ballast Required!

  • Directly relamp and replace the 15 watt fluorescent bulbs F15T12, F15T8, FO13/700, FO13/800 without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
  • Designed with flexibility in mind, T8 diameter tube lighting fits T8/ T10/ T12 applications as they all use Medium Bi-Pin base, pin spacing 13 mm, end connector.
  • All plastic diffuser and construction for better light distribution, less or no spot reflections. Energy saving of 40% from 15 watts to 9 watts with 990 lumens output.
  • T8 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
  • 2-year, warranty does not require registration.
  • however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
Check Stock

Yescom 55W HID Ballast DC 12V Universal Replacement for Xenon Light H1 H3 H7 H8 9005 9006 Pack of 2

  • [Application]: 2Pcs of HID Ballasts make low voltage rise to high voltage to activate Xenon in car lamp for fast entering working status, maintaining....
  • [Efficient & Stable]: Compared with magnetic ballasts, HID ballasts can reduce the input power more than 10% for saving energy.
  • [Durable & Safe]: Aluminum shell for providing water resistance, dust resistance and anti-vibration, perfect for working in different occasions.
  • [Plug & Play]: Integrated one-piece ballast with plugs for fast and easy connecting, no tools required, just connect to car with 12V light socket to....
  • [Wide Application]: Widely used for replacing your defective ballast and making your car lights into working status quickly.
Check Stock

NYLL - (4 Pack 4 FT/ 48” Plug & Play LED Tube - Cool White (4100K) T12 LED Directly 40W Relamp Fluorescent Bulb F40/SP41, F40/SPEC41 F40/D41 841 (Without rewiring or Modification) - Ballast Required!

  • Directly relamp and replace fluorescent bulb F40T10, F40T12, F40/ECO without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
  • Designed with flexibility in mind, T8 diameter tube lighting fits T10/ T12 applications as they all uses Medium Bi-Pin base or G13 base, pin spacing 13 mm, end connector.
  • All plastic diffuser and construction for better light distribution, less or no spot reflections. Energy saving of 50% from 40 watts to 20 watts with 2200 lumens output.
  • T8 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
  • 2-year, warranty does not require registration.
  • however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
Check Stock