Categories

Best Standard Dry Pressure Gauge

PLG Water Pressure Gauge Test Set,2 in. 0 psi 230 psi,with Teflon Tape About 300 inch, 3/4\ GHT Female Hose Connector,3/4\ to 1/2\ Spigot Adapters

  • The water pressure tester with stainless steel shell design,Oil filled to prevent friction of internal components..
  • Easy to install: Hold the gauge then swivel the female threads to connect your hose bib,Screw Down.
  • The pressure gauge provides accurate water pressure readings from 0 to 230 psi.Check your house pressure,helps your shower valves, water filtration system,irrigation system... SAVE water,SAVE money.
  • With Teflon tape about 300 inch,Works for standard garden hose threads watering tools,pressure washer, faucets and garden hose,outdoor and indoor. another 1/2" standard adapter for connecting 1/2" threads such as pipes, shower, water tank etc..
  • Warning: Keep the gauge within 1/3-2/3 of the upper limit to Ensure Life.Our water pressure gauge with oil to prevent friction of internal components,which are strictly quality-checked.If you have any question, contact us freely.
Check Stock

MOTOR METER RACING 6 Gauge Set Classic with GPS Electrical Speedometer Digital Odometer Black Dial

  • Speedometer & Tachometer: Standard 3-3/8"(85mm) sized back. For any 1 to 9 cylinder gas powered engine & 12-volt negative ground systems. Volt gauge, Oil pressure gauge, Water temp gauge, Fuel gauge: Standard 2"(52mm) sized back..
  • FEATURES: In-dash design, Light bulb illumination, Convex lens, Stainless bezel, Plastic housing. Cylinders switch on the gauge back..
  • Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI..
  • INCLUDES: GPS Sensor & Converter, Water temp sensor (Thread size: 1/8 NPT), Oil pressure sensor (Thread size: 1/8 NPT), Fuel level sender, Power harness, U-bracket kit, Tachometer Filter x 2, Installation Instructions..
  • One-year warranty for non-human factor damage and free lifetime technical support..
Check Stock

BACOENG Standard Tower Kegerator No Tank Beer Conversion Kit

  • ...ULATOR: Easily measure PSI and Co2 volume and adjust Co2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features. The top gauge indicates output pressure, while the side gauge tells you what's left in the Co2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L D System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial gr....
Check Stock

KIMISS Fuel Injection Pump Pressure Tester Gauge Kit TU-114 Petrol Diesel Fuel Pressure Gauge Tester Fuel Injection Pump Diagnostic Tool Kit

  • ❤ 【With Automatic Diagnostic Function】❤ --- TU-114 Fuel Pressure Gauge Auto Diagnostics Tools For Fuel Injection Pump Tester. The pressure....
  • ❤ 【Protective】❤ --- The components are fitted with quick coupling systems and safety valves to prevent inadvertent discharge of fuel under....
  • ❤ 【Safe Fuel Recovery】❤ --- The gauge comes with a pressure release valve on the side of the gauge, also a long drain hose for safe fuel....
  • ❤ 【Connections For Tu-114 Fuel Pressure Gauge Tool Kit】❤ --- 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve....
  • ❤ 【Reading Range】❤ --- Fitted with 90mm gauge having two scales (psi and bar), reading from 0~140psi and 0~10bar. Pressure gauge adopts rubber....
Check Stock

Nitrogen Regulator with 60' Hose for HVAC Purge, 0-800 PSI Output Pressure, CGA580 Inlet Connection and 1/4'' Male Flare Outlet Connection

  • 【Connection】CGA-580 Inlet Connection fits standard Nitrogen, Argon, Helium, and Inert Gas Tanks from any supplier.1/4" Male Flare Outlet Connection fits HVAC Charging Hoses for Purging ,Pressure Testing and High-pressure lines..
  • 【Accurate Pressure Gauge】The Nitrogen Gas Regulator has two Easy to read pressure gauge,covered with scratch-resistant plastic protective film and rubber cover.Input: 0-4000PSI.Output: adjustable 0-600PSI.The display show 800PSI that you can rate them at 600PSI, but they are able to go up to 800PSI..
  • 【Durable Construction】Our Nitrogen Regulator is made of solid brass,so the surface can keep good looking in a long time. Precision thread design ensures high sealing performance and avoids gas leakage. You can adjust the nitrogen regulator smoothly and accurately through the T-handle to prevent galling..
  • 【Application】The Nitrogen regulator is a standard pressure control valve that reduces the input pressure from a liquid or gas stored in a tank.It is great for HVAC purging,pressure tests,inertization,leakage tests,and Soldering,like the accurate reading of Nitrogen Regulator would help you to adjust pressure before HVAC puring..
  • 【Filter Structure】A filter structure is used at the connection, which can effectively ....
Check Stock

Kegco BF STCK-5T Standard Tower Kegerator Conversion Kit with 5 lb Co2 Tank, Standard

  • ... GAUGE REGULATOR: Easily measure PSI and CO2 volume and adjust CO2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features. The top gauge indicates output pressure, while the side gauge tells you what's left in the CO2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use.
  • simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex n....
Check Stock

AC Gauges Digital HVAC Manifold Gauge Set for 93 Refrigerants AC Pressure Gauge Set R134A R22 R12 R410A R1234YF Home Car Automotive Refrigerant Recharge Kit Refrigeration Hoses with Low Loss Fittings

  • 【Built-in 93 Kinds of Refrigerant Database】The upgraded Digital HVAC Manifold Gauge Set has a built-in 93 refrigerant pressure-evaporating temperature database according to the America NIST standard. Newly added 4 refrigerant types: R438A, R448A, R449A, and R452A. The manifold gauge set has the double pressure test, dual temperature test, digital readout, multi-unit switching (kPa, Mpa, bar, inHg, PSI or °C, °F ), and multi-mode function..
  • 【Automatic Calculation of Subcooling and Superheating】The refrigeration gauges built-in 32-bit digital processing unit and high-precision data acquisition unit, high data and stability. Digital refrigerant gauges can also calculate the supercooling and superheating degree, which is convenient to read the data directly during the operation. In addition, the ac manifold gauge set tests the percentage of vacuum measurement.
  • pressure leak measurement, and leak time speed record..
  • 【Visualization Window & Refrigerant Charging & Vacuum Operation】Through the window of HVAC digital gauges, the charging state of the refrigerant can be directly observed, which is more convenient to operate. The HVAC digital manifold gauge set can realize vacuum operation by connecting the refrigeration equipment and vacuum pump. N....
Check Stock

ARTILAURA 6 Gauge Set-GPS Speedometer, Tachometer, Fuel Gauge, Water Temperature Gauge, Oil Pressure Gauge, Voltage 7 Color Backlight for Car AUTO Boat Marine

  • ..., Volt gauge indicating Range: 8 - 16V, Fuel Level gauge indicating Range: E - F & Resistance 240-33 ohms, Water Temperature gauge indicating Range: 30 - 250°F (0 - 120°C), Oil Pressure gauge indicating Range: 0 - 150 PSI (0 -10 BAR)..
  • GPS Speedometer and Tachometer: Standard 85mm (3 3/8") hole in the panel (II) and allow a clearance of 55mm (2 3/16") behind the panel to fit the gauge. The Fuel Gauge, Water Temperature, Volt and Oil Pressure Gauge diameter is 2-1/16 inch (52mm)..
  • 【Material】The boat gauge are made of 316L Metal, Rubber and Plastic. Scratch resistant curved glass lenses. IP67 waterproof and dustproof grade..
  • ⭐⭐⭐⭐⭐[Attention]: Package Includes GPS Antenna, Tachometer Sensor(M16*1.5), Water Temp Sensor (1/8 NPT), Oil Pressure Sensor (1/8 NPT), 240-33 ohms Fuel Level Sender & Installation Instructions . Please contact us if you are dissatisfied with our products, the response will be taken in 24 hours and provide proper solutions..
Check Stock

Kegco EBSHCK-5T Kegerator Kit, 1 Faucet with Tank, Standard

  • BALL LOCK KEG COUPLERS: This complete ball lock home brew keg tap set includes both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in comes with a 1/4" nut and 5/16" hose barb already attached, allowing you to quickly connect it to the same size air line that standard draft beer regulators use. The beer out connector has a 3/16" hose barb that connects to standard 3/16" beer line..
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length..
  • INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank....
Check Stock

ARTILAURA 6 Gauge Set-GPS Speedometer 120MPH, Tachometer, Fuel Gauge, Water Temperature Gauge, Oil Pressure Gauge, Voltage 7 Color Backlight for Car AUTO Boat Marine(White)

  • ..., Volt gauge indicating Range: 8 - 16V, Fuel Level gauge indicating Range: E - F & Resistance 240-33 ohms, Water Temperature gauge indicating Range: 30 - 250°F (0 - 120°C), Oil Pressure gauge indicating Range: 0 - 150 PSI (0 -10 BAR)..
  • GPS Speedometer and Tachometer: Standard 85mm (3 3/8") hole in the panel (II) and allow a clearance of 55mm (2 3/16") behind the panel to fit the gauge. The Fuel Gauge, Water Temperature, Volt and Oil Pressure Gauge diameter is 2-1/16 inch (52mm)..
  • 【Material】The boat gauge are made of 316L Metal, Rubber and Plastic. Scratch resistant curved glass lenses. IP67 waterproof and dustproof grade..
  • ⭐⭐⭐⭐⭐[Attention]: Package Includes GPS Antenna, Tachometer Sensor(M16*1.5), Water Temp Sensor (1/8 NPT), Oil Pressure Sensor (1/8 NPT), 240-33 ohms Fuel Level Sender & Installation Instructions . Please contact us if you are dissatisfied with our products, the response will be taken in 24 hours and provide proper solutions..
Check Stock

VEVOR Hydraulic Pressure Test Kit, 25/40/60Mpa/9Couplings, Excavator Parts Hydraulic Tester Coupling, Hydraulic Pressure Gauge Kit for Excavator Construction Machinery

  • ... graduations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Eight interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/8, G1/4, G3/8, M10/1, M10/1.25, M14/1.5, UNF7/16-20, and UNF9/16-18, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, shipping, etc..
Check Stock

VEVOR Hydraulic Pressure Test Kit, 25/40/60Mpa/11Couplings, Excavator Parts Hydraulic Tester Coupling Hydraulic Pressure Gauge Kit for Excavator Construction Machinery

  • ...duations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Ten interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/4, R1/4, G3/8, G1/8, M10 x 1, M10 x 1.25, M1/8, M14 x 1.5, 7/16, and 9/16, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, shipping, etc..
Check Stock

Digital Manifold HVAC Gauges Set with Pressure&Temp Test, Digital Refrigerant Gauges Built-in 89 Refrigerant Database, HVAC Gauges Set with Refrigerant Hoses,Temp Clips& 3.5″ LCD Display

  • ...to read, and convenient to view various test data..
  • 【Refrigeration Digital Manifold Gauge】The Air Pressure Gauge uses high-strength engineering plastics and flexible non-slip silicone design and hook design, with Air Hose Manifold, Hose Clamp Set, Toolbox, easy to test and carry. Long-life valve switch, 1/4-inch standard interface design to ensure that the manifold Gauge durability, portability and versatility.The manometer for the installation, testing and maintenance of refrigeration equipment such as air conditioners,fridge and cold storage..
  • 【Automatic multi-unit switching of pressure gauge】Manifold Gauge has automatic multi-unit pressure conversion, Celsius/Fahrenheit temperature automatic conversion, including kPa, Mpa, bar, inHg, PSI, and temperature unit switching, which can meet the different needs of various tests. The hvac tools can also test the percentage of vacuum measurement and the leak time rate record..
  • 【NOTE】The battery is not included in the package！！！ It is normal that the test data and the actual data have an error within 3%. It is necessary to consider various factors such as the test environment and ensure the normal connection of the test line..
Check Stock