Baomain DDS238-4 （30-100）Single Phase DIN-Rail Kilowatt Hour kwh Meter 220V 100A
- Rate Voltage:220V 230V 240V Rate Current:30(100A).
- 220V Single Phase DIN-rail Kilowatt Hour kwh Meter.
- Insulation Performance:AC voltage 2KV for 1 minute,impulse voltage 6KV.
- Accuracy Class:Class 1 Starting Current:0.4%lb.
- 35mm standard DIN rail installation,complying with standard DIN EN5002.
Check StockRockler 921727 Rail Coping Sled
- 【SBR16 LINEAR RAIL】- Two 2000mm/78.8″ long SBR16 rail shafts, and 4 SBR16UU blocks are included in the package. Smooth sliding blocks moving freely..
- 【CARBON STEEL MATERIAL】- Parts are made of carbon steel, with quality bearing steel linear bearings and aluminum alloy housing. Surface chrome plating treatment to be anti-rust, high hardness and more durable..
- 【SMOOTH SLIDING SYSTEM】- With industrial-grade standard SBR block and a high precision linear bearing inside, the original rail set can be stabilized by rail axle bearing rail and aluminum alloy support..
- 【EFFORTLESS TO INSTALL】- 5 pre-drilled holes ensures easy mounting, no need for maintenance. Stainless steel Linear optical axis guide bearings linear movement. 4 pieces SBR16UU Bearing Blocks afforded..
- 【WIDE USES】- Gross Weight: 25.35 lb (11.5 kg), lightweight design for easy to use. Suitable for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc..
Check StockUNO Screw Terminal Block Breakout Module with Aluminum Enclosure for UNO R3.
- UNO Screw Terminal Block Breakout Module with Aluminum Enclosure. With the adapter module you can easily extend UNO projects to industrial control....
- Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. Standard IDC40 pitch....
- Support for Desktop, Panel mount, Wall-mount or DIN rail mount. DIN rail mount supports vertical or horizontal place mounting. Can support width 35mm....
- Enclosure: High quality aluminum enclosure, thickness 1.5mm/0.06", with attractive and extremely durable powder coat painting and clear laser marking....
- Packing list: 1x Terminal Block Board(assembled standoffs and screws), 1x Aluminum enclosure(top and bottom covers), 5x M3x4mm Flat head screws(for....
Check StockCZH-LABS DIN Rail Mount DSUB DB50 Male/Female Header Interface Module D-SUB Breakout Board.
- Standard DB50 Male/Female header connectors. Male header, female header and screw terminal 1:1:1 connects for per line..
- Rated voltage: 60V. Rated current: 1A / per pin. Operating Temperature: -20ºC to 50ºC.
- Terminal block: Pitch 3.81mm/0.15" miniaturization screw terminal block. Wire range - 26-16AWG. Strip length - 5mm. Screws - M2,steel,Cr3+ Zn plated.....
- FR-4 fiber glass PCB, dual copper layers..
- High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the....
Check StockBAODANFIRST Picatinny Rail Durable Riser Mount with 8 Slots 0.5'' High 3.35'' Long for Optic Sight & Scope High-Grade Aluminum Alloy Made 20mm Picatinny Rail Riser Mount
- Made of high-grade aluminum alloy and matte black anodized,the 20mm rail mount is lightweight,durable and anti-rust.VRJ.
- With 8-slot 3.35" long rail design,this picatinny rail moubt allows you to add on any standard picatinny or weaver accessories, Ideal for mounting scopes, optics and red dot sights, flashlight or other accessories..
- Size and weight: Low Profile: 0.5' inches Saddle Height - 8 Slots / 3.35 Inch Length.
- 2 locking nuts and cross bolts on the side,which can be installed and removed quickly and easily anytime, anywhere, without any auxiliary tools..
- Buy with 100% Confidence: Please feel free to contact us get quick support or solutions within 24H if you have any questions or dissatisfaction with our rail riser mount.Thanks:).
Check StockMonstrum Precision V2 Picatinny Scope Rings | 34 mm Diameter | 1.00 inch Height
- 1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
- 34 mm diameter rings for mounting standard 34 mm rifle scope tubes.
- Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
- Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
- Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check StockMonstrum Precision V2 Picatinny Scope Rings | 30 mm Diameter | 0.85 inch Height
- 0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
- 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
- Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
- Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
- Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check StockMURRAY MP1515 Two 15-Amp Single Pole 120-Volt Circuit Breaker
- Size: 2.6"x 3.1"x 0.7"/ 67 x78 x 18mm (L*W*H). Fit for 35mm DIN rail..
- Function: High quality AC mini circuit used for line overload, short circuit protection and infrequent conversion of lines. It can also work as on-off switch for load circuits..
- Easy Installation: Modular sturcture, can be easily installed on the DIN standard guide rail in distribution box, bistable locking clip..
- Applications: DZ47-63 series miniature circuit breaker is mainly used for the illumination of office buildings and residential buildings. It is used for distribution and protection the facilities from damages caused by overload and short-circuit..
Check StockPRI Polymer Ring Inserts - 30mm to 1 Inch. by Unknown
- Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
- 30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
- Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
- Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
- Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock
UYGALAXY Linear Actuator Controller DC Motor 12V Momentary Switch Forward/Reverse Wireless Remote Control DPDT Relay for Motors
- 【SBR16 LINEAR RAIL】- Two 2000mm/78.8" long SBR16 rail shafts, and 4 SBR16UU blocks are included in the package. Smooth sliding blocks moving freely..
- 【CARBON STEEL MATERIAL】- Parts are made of carbon steel, with quality bearing steel linear bearings and aluminum alloy housing. Surface chrome plating treatment to be anti-rust, high hardness and more durable..
- 【SMOOTH SLIDING SYSTEM】- With industrial-grade standard SBR block and a high precision linear bearing inside, the original rail set can be stabilized by rail axle bearing rail and aluminum alloy support..
- 【EFFORTLESS TO INSTALL】- 5 pre-drilled holes ensures easy mounting, no need for maintenance. Stainless steel Linear optical axis guide bearings linear movement. 4 pieces SBR16UU Bearing Blocks afforded..
- 【WIDE USES】- Gross Weight: 25.35 lb (11.5 kg), lightweight design for easy to use. Suitable for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc..
Check Stock
Mssoomm 2Pcs Linear Motion Rod Shaft Slide Guide D 10mm x L 39.37 inch / 1000mm + 4Pcs Block Bearings SCS10UU + 4Pcs Aluminum Rail Support SK10 Linear Motion Set Kit for 3D Printer, DIY, CNC
- Linear rail set kit includes 2pcs 10mm 39.37 inch / 1000mm chrome plated linear shaft rod + 4Pcs fixed shaft support SK10 + 4Pcs pillar block bearings SCS10UU.
- Linear motion bearing kit are made of carbon steel, linear Bearings made of GCr15 bearing steel with aluminum alloy housing. The case hardness could be reach to 58-64 HRC. Durable and corrosion-resistant..
- Widely applied in CNC, 3D printer, automatic machinery, injection molding machine, engraving machine, etc. especially in bearing purpose.
- Perfect combination of main shaft rod rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard bearing block, with high precision linear bearing inside.
- We can customize the linear rail, including the length and end processing, with differert slider block to choose which showed in the image, please tell us if you need. We provide full range of different diameter of the linear rail shaft rod: 5, 6, 8, 10, 12, 13, 14, 16, 20, 25, 30, 35, 40, 50mm and so on..
Check Stock
EVTSCAN Latest DPA51CM44 3-Phase Monitoring Relay, Current/Voltage Monitoring Relay Phase Sequence Protector for Three-Phase System, Without Neutral, Phase Loss, 208-480VAC
- ✈ PRODUCT NAME---Voltage Monitoring Relay.
- Protection function: over voltage, under voltage.
- Contact capacity: 6A 250VAC (resistivity).
- ✈ REAL-TIME MONITORING---The voltage monitoring relay could achieve real-time monitoring of dc overvoltage and undervoltage faults, and over-voltage, under-voltage value, and action time can be adjusted.
- ✈ MAIN FEATURES---The voltage monitoring relay is of 2 sets of normally open and normally closed contacts, 2 indicator lights indicate various working conditions, no additional auxiliary power supply is required.
- ✈ 35MM GUIDE RAIL---With 35mm guide rail and standard modular structure, the voltage monitoring relay is easy to install, easy to operate.
- ✈ TYPICAL APPLICATIONS---The voltage monitoring relay is typically applied in dc motor, battery,UPS power supply, dc switchgear, dc panel, industrial control system.
Check StockASI IMACP01-CB5 DIN Rail Mounted Receptacle, AC Outlet Power Module with Resettable 5 Amp Circuit Breaker, 125 VAC, UL, 30 to 12 AWG
- Easy to install DIN Rail outlet on standard 35 mm DIN Rail.
- Provides easy to access AC power to panel or enclosure.
- Easy to wire and finger safe Screw Clamp terminations.
Check Stock
