Best State Of Slim Phase 1
Mini AC 220-440V TG30S Phase Sequence Protection Voltage Monitoring Relay Voltage Phase Protective Relay Building Electronics Projects for Industry Applications
- Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
- Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
- Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
- Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
- The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check StockOmron K8DS-PH1 Phase Monitoring Relay
- The base of the protector adopts a rail type with two screw holes, which can be directly installed separately or mounted on the HT35 rail..
- Use 5 indicators to indicate: normal, phase loss (voltage three-phase unbalance), reverse phase, overvoltage and undervoltage..
- Phase loss protection means that when the protected line is in the running state or non-operating state, any phase failure occurs, and the delay is 2S..
- Overvoltage protection means that the voltage of the protected line is higher than the set value, and the delay is 3~8S, and the recovery is 6~20VAC..
- Reverse phase protection, a protection measure to prevent L1, L2, L3 three-phase AC phase sequence from being connected incorrectly, delay 2S action..
Check StockSiemens 3UG4631-1AW30 Monitoring Relay, Single Phase Voltage Monitoring, Screw Terminal, 1 CO Contacts, 0.1-60VAC/DC Measuring Range, 0.1-30V Hysteresis, 0-20s Delay Time, 24-240VAC/DC Auxiliary Voltage
- 3 INDICATORS-The protector base adopts 35mm rail type or device type, and has two screw hole structures inside, which can be directly installed separately or HT35 rail. Indicated by three indicators: normal, phase loss(voltage three-phase unbalance), reverse phase.
- PHASE LOSS PROTECTION-Phase loss protection means that when the protected line is in the running state or non-operating state, any phase failure occurs, and the delay is 2S.
- REVERSE PHASE PROTECTION-Reverse phase protection, a protection measure to prevent L1, L2, L3 three-phase AC phase sequence from being connected incorrectly, delay 2S action.
- VOLTAGE IMBALANCE PROTECTION-Voltage imbalance protection, which refers to a protective measure that will affect the safe operation of the line due to three-phase voltage imbalance.
- IDEAL FOR-Widely used in air compressors, electric motors, distribution boxes, water pumps, oil pumps, central air conditioning units, etc.
Check StockBrunton Echo Pocket Scope 7X18 - Green
- Bak-4 Prism glass and state of the art phase coating.
- Eye relief: 12mm, Exit pupil: 2.6mm - 1.8mm.
Check StockStar Wars Legion Phase 1 Clone Troopers Expansion | Two Player Battle Game | Miniatures Game | Strategy Game for Adults and Teens | Ages 14+ | Average Playtime 3 Hours | Made by Atomic Mass Games
- THIS IS AN EXPANSION FOR THE STAR WARS LEGION BOARD GAME: You will need the Star Wars Legion Board Game Core Set to play with this expansion..
- PHASE I CLONE TROOPERS: Genetically crafted for battle and outfitted with state-of-the-art equipment, Clone Troopers charge into battle on countless worlds to do the job they were made for: defeat the Separatist Alliance and restore order to the galaxy..
- A GALACTIC REPUBLIC COMMANDER EXPANSION: This set contains everything you need to add this new commander to your Galactic Republic army, including an unpainted Clone Captain Rex miniature that can be assembled without his helmet, or with either a Phase I or Phase II Clone Trooper helmet..
- CUSTOMIZE YOUR UNITS: This expansion also includes a unit card and an assortment of upgrade cards, inviting you to customize your Clone Troopers’ gear with state-of-the-art equipment to fit your battle plan..
- NUMBER OF PLAYERS AND AVERAGE PLAYTIME: This action-packed battle game is designed for two players and is suitable for ages 14 and older. Average playing time is about 3 hours..
Check StockSpaGuts WiFi Spa Control System SGBP2000G1, 56777 with Topside Panel TP800 Model and M8® Smart Temperature and Flow Sensor Technology, 5.5Kw HTR
- Detects phase loss, low voltage, phase reversal.
- solid-state voltage and phase-angle sensing circuit.
Check StockJuried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 10
- 20-V digital or ± 10-V peak-to-peak switching.
- 280 ohm- typical on-state resistance for 15-V operation, Matched control-input to signal-output capacitance: Reduces output signal transients, Frequency response, switch on = 40MHz (typ.), Maximum control input current of 1 µA at 18 V over full package temperature range.
- Switch on-state resistance matched to within 10 ohm typ. over 15-V signal-input range, High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k ohm, Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k ohm, 5-V, 10-V, and 15-V parametric ratings.
- Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog....
Check StockJuried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 20
- 20-V digital or ± 10-V peak-to-peak switching.
- 280 ohm- typical on-state resistance for 15-V operation, Matched control-input to signal-output capacitance: Reduces output signal transients, Frequency response, switch on = 40MHz (typ.), Maximum control input current of 1 µA at 18 V over full package temperature range.
- Switch on-state resistance matched to within 10 ohm typ. over 15-V signal-input range, High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k ohm, Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k ohm, 5-V, 10-V, and 15-V parametric ratings.
- Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog....
Check StockJuried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 5
- 20-V digital or ± 10-V peak-to-peak switching.
- 280 ohm- typical on-state resistance for 15-V operation, Matched control-input to signal-output capacitance: Reduces output signal transients, Frequency response, switch on = 40MHz (typ.), Maximum control input current of 1 µA at 18 V over full package temperature range.
- Switch on-state resistance matched to within 10 ohm typ. over 15-V signal-input range, High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k ohm, Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k ohm, 5-V, 10-V, and 15-V parametric ratings.
- Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog....
Check StockElectric kWh Meter, 100A 120/240 Volt, 3-Wire, 60Hz
- ELECTRIC METER – State-of-the-art, fully solid-state kWh meter with 800 pulse per kWh pulse output..
- SINGLE PHASE – Up to 100 amps, 120/240-volt, 3-wire, 60Hz..
- ACCURATE – 1% accuracy class, LCD readout in hundredths of a kWh, to 99999.99 kWh..
- COMPACT – Simple DIN-rail mounting designed for symmetrical load..
- LCD DISPLAY – Non-resettable LCD display. Usage data is maintained through power outages..
Check StockSpore (Mac/PC DVD)
- ...and evolve with forays away from your safe haven. Carnivore or Herbivore? Social or Independent? The choice is yours.
- Tribal phase: Instead of controlling an individual creature, you are now caring for an entire tribe of your genetic craftwork. Give them tools and guide their interactions as you slowly upgrade their state of existence.
- City phase: Bring your creatures' race into a new golden era by building up the technology, architecture, and infrastructure of their city.
- Civilization phase: Once your city is established, your creatures begin seeking out and interacting with other cultures. You can have them do so with an olive branch or a war cry either way, the goal for your creatures is to unify the planet.
- Space phase: The time has come to move on to other worlds in your solar system. Make first-contact, colonize, or terraform, then venture further to find other solar systems scattered throughout a magnificently rendered galaxy. A 'mission' structure provides new goals and paths to follow as you begin to spread through the universe.
- A suite of flexible, intuitive creation tools leverages the creative imagination of the player. Creating an entire universe of creatures, plants, buildings, vehicles and planets has never been so easy or so fun. An infini....
Check StockDP Motor Starter,3P,25A,480V Coil,NEMA1
- The Siemens 14CUC32BA heavy duty motor starter is a solid state overload motor starter that features an auto/manual reset, open type enclosure, and a NEMA 1 general purpose enclosure.
- This motor starter can provide 3 phase, 3 pole, 0 NEMA size, and can provide 3-12A amp range. This motor starter is designed for use with 110-120/220-240 at 60Hz coil voltage.
- Package weight of the Product:13.09 Pounds.
Check StockPRV AUDIO 2X 6MR250B-4 Slim Midrange 6.5" Shallow Bullet Speakers 250 Watts 4 Ohm, Slim Mount Car Audio Bullet Loudspeaker Compact for Doors with 1 Exclusive Lanyard (2 Speakers)
- EXCLUSIVE PACKAGE: When you buy this product you will receive 2 (two) speakers model 6MR250B-4 Slim and 1 (one) unique lanyard, only available from PRV AUDIO Group.
- PRO AUDIO ON WHEELS: This pair of mid-range speakers were designed for shallow doors featuring an Aluminum phase plug (bullet). These mids are built like a professional mid range loudspeaker, but it has been designed for use in the mobile audio market.
- SOLID & COMPACT STRUCTURE: The “bullet” phase plug is made from pure aluminum acting as a radiator cooling system for the voice coil and machined to perfection for even sound dissipation. Loud and clear vocals all within 2.14″ of mounting depth without sacrifice quality and performance.
- POWER YOU CAN RELY ON: Built for compact spaces and able to handle 250 watts of continuous power each. Its slim design makes this the perfect car audio door speaker, allowing it to be utilized in endless ways.
- UPGRADE TODAY, HEAR THE DIFFERENCE: By combining elements from PRO Audio and Car Audio we have developed a NEW type of high efficient mid-range that is able to give high levels of output from stock speaker location in your car.
Check Stock