Categories

Best Steam Engine Slide Valve

Surwit 15810-RAA-A03 VTEC Solenoid Spool Valve Assembly with Oil Pressure Switch & Gasket Compatible with Honda Accord Element CR-V 2.4L Civic Acura RSX 2.0L Part# 15810-RAA-A01 15810-PPA-A01

  • The VTEC system provides the engine with valve timing optimized for both low and high RPM operations. The VTEC solenoid actually allows oil to flow to the internal galleries of the overhead camshaft. This means that the housing of the solenoid is holding back full engine oil pressure. A spool solenoid valve can direct the flow of hydraulic fluid. The valve is made up of spools that rotate or slide to block and open channels in a hydraulic system..
  • This VTEC Solenoid Spool Valve Fits for 2003 - 2011 Honda Element 2.4L, 2002 - 2009 Honda CR-V 2.4L, 2003 - 2007 Honda Accord 2.4L, 2002 - 2006 Acura RSX 2.0L, 2002 - 2005 Honda Civic 2.0L..
  • Customers can find the product you need accurately according to the OE number. OE part number: 917-224, 15810RAAA03, 15810RAAA02, 15810-RAA-A01, 15810PPAA01, 15810PNEG01, 15810-RAA-A03, 917224, 15810-PNE-G01, 15810-RAA-A02..
  • While a VTEC solenoid rarely goes bad, problems with VTEC not engaging properly are extremely common. Most of the time incorrect wiring is to blame, but occasionally something even smaller is the culprit. When a solenoid is bad, may mean the solenoid's plunger is either mechanically stuck in a closed position and therefore always making contact which may eventually cause the starter motor to burn its w....
Check Stock

53021077 Lifters replacement For 4.7 Dodge/Chrysler Lash Adjusters HLA Replaces Part # 53021077 5073596AA (16 Packs)

  • VALVE LAP TOOL HELPS YOU SEAT VALVES ACCURATELY: Use the ABN Drill Valve Grinding Tool Attachment Valve Lapping Set to properly fit and seat valves into your vehicle engine.
  • Correct surface irregularities and remove sub-surface damage on your new valves with these motorcycle valve lapping tool small engine tools to fit perfectly into the valve guide for a secure fit.
  • For use with fine grinding paste (not included).
  • PERFECT VALVE LAPPING CUP SIZES FOR YOUR NEEDS: 4 attachable suction plates are included with this valve seat lapper tool kit to make fitting and seating various valve sizes in your lawnmower, chainsaw, car, or motorcycle.
  • Includes 20mm (3/4 inch), 30mm (1-3/16 inch), 35mm (1-3/8 inch) and 45mm (1-3/4 inch) synthetic rubber suction cups that are oil and UV resistant.
  • FITS YOUR TOOLS: Small engine valve lapping kit includes a 5 inch rubber roller attachment that has two 8mm (5/16 inch) steel shanks to fit your drill and the included suction cups.
  • Electric drill attachment provides increased control and productivity with less user fatigue while you put the finishing touches on your tune-up.
  • EASY TO USE: Clean all carbon deposits off valve and valve guide.
Check Stock

Happybuy Steam Generator 9KW Steam Showers 220V-240V Sauna Steam Generator with Programmable Controller for Home SPA Bathroom Hotel Shower Steam(Controller Not Contain Battery)

  • ...are responsible for the products and are more concerned about your safety. NOTE:The steam generator cannot drain the water automatically and needs to be drained manually..
  • Independent Panel: Compared with ordinary steam generator showers, our intelligent KS-100 temperature control panel is easy to operate. The steam engine time can be set from 60 minutes/long duration, and the temperature can be adjusted to 95 -131℉ (35-55℃). NOTE:The controller not contain battery,just link the machine and adjust the temperature..
  • Easy To Install: Steam shower sauna small and practical, easy to install, to meet the needs of a variety of scenarios. It can be widely used in hotels, swimming pools, beauty salons, bath centers, gyms, gymnasiums, and other places. Note:This steam generator has a 3/4" steam outlet pipe. Please pay attention to this size when installing..
Check Stock

Train Smoke & Dreams

  • A FULL SET WITH NUMEROUS ACCESSORIES – This motorized train toy comes with a classic steam engine, 2 passenger coaches, a coal car, 8 pieces curved tracks and 4 pieces straight tracks. Turn on the railway set and get ready to enjoy a pleasant journey. Dimension of track layout: 69.3’’ (L) x 41.7’’ (W)..
  • EASY TO ASSEMBLE AND READ TO PLAY - Assemble the modular rail track parts into your own railroad shape and layout, place your train engine and favorite cars on the tracks under the help of guiding track(put train set on the guiding track first, then slide them to the track you already set up, that make sure all wheels are on the track), put your conductor's hat on, and blow the whistle! It's time for fun!.
  • REALISTIC HEADLIGHT, SOUNDS & SMOKE – The electric train model also features authentic LED light, realistic sounds. Moreover, you can add water into the container that is behind the chimney, then real steam will be produced from the chimney. Locomotive Engine requires 4 AA Batteries, not included (New version comes with rechargeable battery, two versions shipped randomly)..
Check Stock

Steam Release Valve Handle for Ninja Foodi OP401/OP301 6.5, 8 Quart, Ninja Foodi Pressure Cooker Replacement Valve Part Accessories

  • ✔ | WIDE COMPATIBILITY | - This steam release valve compatible with Ninja Foodi OP401 OP301 6.5 8 Quart Ninja Foodi Pressure Cooker..
  • ✔ | HIGH QUALITY MATERIAL | - The steam release valve for pressure cooker is made of premium PP material, it is high-temperature resistant, sturdy, adjustable and durable..
  • ✔ | VENTING & SEALING CONTROL | - The steam release valve controls “Venting” and “Sealing” of your pressure cooker, the replacement part makes your expensive pressure cooker work like new..
  • ✔ | VERY EASY TO CLEAN | - This steam release valve handle is dishwasher safe, making clean up quick and easy..
  • ✔ | KINDLY NOTE | - The steam release valve is NOT FIT FOR some models, please check before you place an order..
Check Stock

A-Premium Engine Valve Cover Kit, with Gasket & PCV Valve & Spark Plug Seal Compatible with 2006-2017, Nissan Armada Pathfinder Titan NV2500 NV3500, INFINITI QX56, V8 5.6L, 13264ZE01A 13264ZE00A

  • [Vehicle Fitment]: Compatible with Nissan Armada 2006-2015 ✔ Pathfinder 2008-2012 ✔ Titan 2006-2015 ✔ NV2500 2012-2017 ✔ NV3500 2012-2017 ✔ INFINITI QX56 2007-2010 ✔ V8 5.6L (Engine Code: VK56DE).
  • [Perfect Solution]: This engine valve cover and gasket kit is best professional solution for nissan v8 4-stroke 5.6l 5552cc engine problem (such as oil leaks, engine bay smoking, burning oil smell, misfiring engine, etc), and restore PVC valve operation, also saves you hundreds of dollars from oem part..
  • [Package Contents]: 2 x Engine Valve Cover Assembly for Left Right Head (with PCV Valve and Spark Plug Seals), 2 x Valve Cover Gaskets (All Parts Comes with 1-Year Warranty).
  • [OE Part Number]: 13264-ZE01A, 13264-S010, 13264-ZE00A, 13264-S000, 13270-7S000. Although this valve cover is not genuine nissan parts, the function and look are same as the factory oem part on armada, titan, pathfinder, nv2500, nv3500. the v8 5.6l naturally aspirated engine valve cover installation is not complicated and can be replaced directly without any special tools.
  • [Customer Support]: 1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this 5.6l gasoline engine valve cover kit is the ideal replacement. please get in touch with us at any time if ....
Check Stock

Kitchen accessories steam release separator pressure cooker exhaust accessories

  • The ears of the steam diverter can be rotated 360 degrees, allowing you to adjust the direction of steam release to safely transfer the steam to any direction without having to enter the cabinet upwards. Excellent pressure cooler accessories can protect your cabinet from moisture and deformation..
  • Before cooking, just place the steam distributor on the valve. After cooking, rotate the accessory to release steam. After cooking, you can remove both ears and wash them with a dishwasher or hand sanitizer. reusable..
  • Our pressure relief valve accessories are useful kitchen accessories that you must have..
  • pecifically designed to safely divert steam to the side instead of up into your cabinets, our steam diverter keeps your kitchen mess free and clean. It prevents moisture that may harm or cause molds on your wooden cabinets..
  • Extremely easy to use, our steam diverter gets installed in seconds without any tools. Simply put it on the valve BEFORE you start cooking, with the lid attached, and once your recipe is complete, rotate it to release steam..
Check Stock

A-Premium Engine Valve Cover Kit, with Gasket, Compatible with Chevy Cruze 2010-2016, Sonic 2012-2018, Trax 2013-2020, Aveo 2009-2011, Aveo5 2009-2011, L4 1.6L 1.8L, Replace # 55558673 55564395

  • [For L4 1.8L Engine] Compatible with Chevrolet Chevy Cruze 2010-2016 ✔ Cruze Limited 2016 ✔ Sonic 2012-2018 ✔ Trax 2013-2020 ✔ Saturn Astra 2008-2009 ✔.
  • [For L4 1.6L Engine] Compatible with Chevrolet Aveo 2009-2011 ✔ Aveo5 2009-2011 ✔ Pontiac G3 2009-2010 ✔ Pontiac G3 Wave 2009 ✔.
  • [Package Details] 1 x Engine Valve Cover with PCV Valve, 1 x Valve Cover Gasket, 1 Set of Bolts (with 1-Year Warranty, and Replace for GM # 55558673, 55564395).
  • [Perfect Solution] This engine valve cover kit is best professional solution for Cruze/Sonic/Trax/Aveo's the engine problem (such as oil leaks, engine bay smoking, burning oil smell, misfiring engine, etc), and restore PVC valve operation, also saves you hundreds of dollars from O-E-M part.
  • [Customer Support] With being easy to install and brand-new, this valve covers is the ideal engine cover which comes with 1-year warranty. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock

A-Premium Engine Valve Cover, with Gasket & Oil Filler Cap, Compatible with 2011-2021, Chevy Cruze Sonic Trax Volt, Buick Encore, Cadillac ELR, 1.4L Turbo Gas, Replace # 55573746 25198498 264-968

  • [Vehicle Fitment]: Compatible with Chevrolet (Chevy) Cruze 2011-2016 1.4L ✔ Cruze Limited 2016 1.4L ✔ Sonic 2012-2020 1.4L ✔ Trax 2013-2021 1.4L ✔ Volt 2011-2015 1.4L ✔ Buick Encore 2013-2021 1.4L ✔ Cadillac ELR 2014-2016 1.4L ✔.
  • [Perfect Solution]: This engine valve cover and gasket kit is best professional solution for gm small car ecotec 1.4l turbo engine problem (such as oil leaks, engine bay smoking, burning oil smell, misfiring engine, etc), and restore PVC valve operation, also saves you hundreds of dollars from oem part.
  • [Package Details]: 1 x Engine Valve Cover Assembly (with PCV), 1 x Main Valve Cover Gasket, 1 x Yellow Oil Filler Cap, A Set of Valve Cover Bolts.
  • [OE Part Number]: 25198498, 25198874, 25198877, 25203036, 55573746, 264-968. Although this valve cover is not genuine GM parts, the function and look are same as the factory oem part on cruze, sonic, trax, volt, encore and elr. the 1.4L engine valve cover installation is not complicated and can be replaced directly without any special tools.
  • [Customer Support]: 1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this 1.4l engine valve cover kit is the ideal replacement. please get in touch with us at any time if the product has any quality issues,....
Check Stock

OEMTOOLS 25029 Flexible Air Valve Holder Hose 14 Length Fits 14mm and 18mm Spark Plug Holes Valve Spring Tools for Air Compressor

  • SAVE TIME AND PREVENT STRESS: Replace valve springs or valve stem seals without removing the engine head.
  • FITS MOST VEHICLES: This air holder fits engines with either an 18mm or 14mm spark plug socket size, making it compatible with the most common....
  • MORE ROOM TO WORK WITH: Easily connect the valve hose to the spark plug hole with the flexible 14 inches of hose, which is longer than some....
  • THE EASY WAY TO DO ENGINE VALVE WORK: While attempting a valve spring removal or valve seal removal, use this valve holder tool to blow compressed air....
  • AN ESSENTIAL PART OF A VALVE SPRING KIT: Unless you are a hobbyist wanting to take apart an engine head for educational or recreational reasons, air....
Check Stock

A-Premium Engine Valve Cover with Gasket Compatible with Honda Accord 2013-2017 CR-V CRV 2015-2019 L4 2.4L Gas K24W1 Engine # 12310RDFA01

  • [Vehicle Fitment] Compatible with Honda Accord 2013 2014 2015 2016 2017 ✔ CR-V CRV 2015 2016 2017 2018 2019 ✔.
  • [Vehicle Fitment] Compatible with Honda i-VTEC K24W1 L4 2.4L Gas Engine Only !!!.
  • [Package Details] 1 x Engine Valve Cover with PCV Valve, 1 x Valve Cover Gasket (w/1-Year Warranty).
  • [Part Advantages] This engine valve cover is best professional solution for 9th Accord's the engine problem (such as oil leaks, engine bay smoking, burning oil smell, misfiring engine, etc), and restore PCV valve operation, also saves you hundreds of dollars from OE part.
  • [The Part Number] 12310-RDF-A01, 12310-5A2-A01, 12310RDFA01, 123105A2A01.
Check Stock

Alamic Steam Release Valve for for Farberware Pressure Cooker 6 and 8 Quart (WM-CS6004W and WM80)

  • WHAT YOU GOT: 1x Farberware replacement steam release handle..
  • Alamic Steam Release Valve for for Farberware Pressure Cooker 6 and 8 Quart (WM-CS6004W and WM80).
  • SAFETY MATERIAL: Alamic steam release handle for instant pot is made of food grade PP and silicone..
  • VENTING & SEALING CONTROL: The Steam Release Valve controls “Venting” and “Sealing” of your instant pot pressure cooker..
  • WORK LIKE NEW: This steam valve replacement will make your precious instant pot work like new..
Check Stock

Valve Cover Engine Valve Carbon Fiber Style Spark Plug Cover, Valve Cover Gasket is Compatible with Honda VTEC B18 B16 B Series（Black）

  • 【Perfectly Matched Engine Valve Cover】 The valve cover is installed on the car engine, which can protect your car engine and keep it clean (features: seal the engine so that the lubricating oil does not leak).
  • 【Valve Cover Gasket Set Compatible Models】 Compatible with 1992-2001 Acura Integra (GS-R), compatible with 1997-2001 Acura Integra (R type), compatible with 1999-2000 Honda Civic sports car (Si), compatible with 1994-1997 Honda Del Sol (VTEC) Etc..
  • 【High-Quality Valve Cover Gasket】 It is made of durable plastic carbon fiber, has a striking twill weave, and adds a unique engine valve spark plug cover, which is light in weight, high in strength, stylish & durable..
  • 【Valve Covers Light Weight】Lightweight carbon fiber, release the old wildness of your car, is definitely an ideal substitute for old parts, and improve dynamic performance. For power enthusiasts, carbon fiber hood should be their real choice..
  • 【Low Price & Low Noise & Easy Installation】 The engine cover is affordable, and the plastic carbon fiber style is cheaper than metal, and it can insulate noise better than metal. Easy to install, no need to drill and cut. (The weight is only 0.2kg).
Check Stock