Categories

Best Steel Axis

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ...5 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min.
  • HIGHLIGHTS OF WATER COOLING SYSTEM 】It can cool the spindle and protect the machine Avoid the spindle burn out Can engrave the high hardness or metal.
Check Stock

Genmitsu CNC Machine 4040-PRO for Wood Acrylic MDF Nylon Carving Cutting, GRBL Control, 3 Axis CNC Router Machine, Working Area 400 x 400 x 78mm (15.7” x 15.7” x 3.1”)

  • ...” x 15.7” x 3.1” is large enough for most daily CNC projects. The redesigned Z-axis carriage makes swapping a spindle easier. Adding more screw holes on the non-all-in-one Z-axis carriage allows you to install the larger spindle higher for extra overfeed height..
  • New Steel HSS Frame - all new redesigned frame structure, each axis is composed of two 16mm Steel HSS linear tubes and a lead screw motion drive, dual Y axis rails, and all metal frame. This new high-rigidity structure ensures the stability and accuracy of the CNC machine..
  • Still based on open-source Grbl v1.1, the 4040-PRO CNC router has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. Upgrades include extended function ports like a dedicated 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port..
  • All main parts are pre-assembled and it just takes about 15 minutes to finish the whole machine assembly. The spoilboard is combined by two pieces of MDF boards. Each MDF board could be replaced individually. You don’t need to replace the whole spoilboard when a panel gets damaged..
Check Stock

Everyday Carry Crooked River Knife, Axis Lock Knife with 3.7’’ D2 Steel Blade Wood Handle, EDC Manual Open Folding Pocket Knife with Thumb Stud, Belt Clip for Camping

  • 【Axis Lock Knife】 Opened length:7.76’’. Blade length:3.23’’. Blade width: 0.87’’. Blade thickness:0.12’’. Handle length:4.5’’. Handle width:1.06’’. Handle thickness:0.43’’. Weight:2.36 oz/67.1g. Blade Material: D2 steel. Handle Material: carbon fiber..
  • 【High-End D2 Steel】 Plain edge blade of the folding pocket knife is made of durable D2 steel and is heat-treated to a hardness of 59-61 HRC, which provides outstanding strength and is corrosion-resistant. Thumb Stud deploys the blade smooth and fast by one hand..
  • 【Ultralight Carbon Fiber Handle】 Low profile pocket knife equipped with a lightweight carbon fiber handle, which ensures a comfortable grip. Exceptionally strong with a featherweight feel in the hand and gnarled texture across the board..
  • 【Safe Axis Locking Mechanism】 With the axis locking mechanism, you can open and close the knife securely and smoothly, which is easy to use and very safe. Belt clip for everyday carrying..
  • 【Ideal EDC Pocket Knife】 Reverse tanto blade is nimble, versatile, and made for the outdoors. With its sl....
Check Stock

4Pcs Omega Spring Replacement, 2 Sets of Spring Sets for the Axis Lock on Benchmade 940 535 555 556 557 707 533 Knives and More

  • [WHAT YOU GET] – You will get 2 Sets of Omega Spring Replacement for the Axis Lock on different model Knives..
  • [DURABLE AND STURDY] – All the Omega Springs are made of high-quality 304 Stainless steel and heat treated appropriately..
  • [COMPATIBILITY] – The Omega Springs are suitable for Benchmade Axis Lock 940 535 555 556 557 707 533..
  • [SPECIFICATIONS] – Spring wire diameter: 0.024 Inch (0.6mm) and the Omega Springs length is about 0.87 Inch (22mm)..
  • [GREAT REPLACEMENT CLIPS] – The Omega Springs are great aftermarket replacements accessories for your failure Omega Springs on Axis Lock. We can refresh or revive your old knives, add years to the life of your old knives with very little time or effort, and save much money..
Check Stock

Genmitsu 3020-PRO MAX CNC Router Machine for Metal Carving and more, GRBL Offline Controller, with Limit Switches & Emergency-Stop, XYZ Effective Working Area 300 x 200 x 72mm (11.8 x 7.9 x 2.8inch)

  • Bigger and better with an all new extra rigid and beefy design featuring an increased Z Height of 72mm dual steel X axis guide rails, all aluminum spindle holder and 300W spindle. All these upgrades make metal carving easier, ideal for an endless variety of drilling, and carving operations on various metals, like brass, copper and 6061 aluminum, etc..
  • Upgraded linear guide structure and 4040 Y axis profiles highly improve the engraving accuracy and processing strength, eliminating Z axis wobble issues that most other desktop CNC machines have..
  • One-piece machined and molded aluminum design ensures flatness and strength of the work platform. Integrated measurement scale is convenient for material positioning. The platform is compatible with most of the CNC clamps on the market..
  • Everything you need out of the box. The Genmitsu 3020-PRO MAX router already includes all of the accessories and components you need at an affordable price, including offline controller, XYZ axis limit switches, emergency stop switches, Z-probe and more..
  • The pre-assembled module of XZ Axis Gantry and Base A....
Check Stock

Bicycle Pedal MTB Pedal Mountain Bike Pedal Electric Vehicle Aluminum Alloy Pedal for BMX Pedal 9/16\ (Black)

  • 1.DURABLE MATERIAL:High Quality Aluminum Alloy Material, Durable Steel Ball Axis, Durable And Long-Term Use.
  • 2.UNIVERSAL:Standard 9/16" Spindle Fits For BMX Bike,Mountain Bike ,Hybrid Bike,Cyclocross Bike,Dirt Jumper, Folding Bike ,Road Bike,Track Bike,Unicycle,Urban Bike-Fixed Gear.
  • 3.NON-SLIP: Aluminum Anti-slip Pedals Are Designed To Clip On The Clips And Do Not Slip Off The Pedals When Gripped. The Axis Of The Steel Ball Increases The Pedal Ppeed Smoothly, Reducing The Amount Of Pumping Time..
  • 4.EASY TO INSTALL: L For Left ,R For Right.
  • 5.SIZE:4.70(L)*3.9(W)*1.1(H)inches,1.3Lbs Each Pair,More Fitted To The Soles,Big Tread Bicycle Pedals Provide A More Comfortable Ride Experience,Make The Ride Safer.
Check Stock

Samson Q7x Professional Dynamic Vocal Microphone (SAQ7X)

  • Dynamic microphone with a tailored frequency response captures vocals, drums, guitars and horns with studio-quality precision.
  • Supercardioid pickup pattern with excellent off-axis rejection that minimizes background noise and maximizes gain before feedback.
  • Smooth, balanced frequency response between 50Hz-16kHz.
  • Handles high SPLs of up 147dB for close-miking situations, excellent for capturing loud guitar amps, snares and much more.
  • Multi-axis capsule shock mount minimizes handling noise.
  • Rugged design with die cast body and steel grille.
Check Stock

8Pcs Omega Spring Replacement 2-Size and 2 Sets of Spring Sets for the Axis Lock on Benchmade 940 535 555 556 557 707 533 810 550 551 552 710 730 Knives and More

  • [WHAT YOU GET] – You will get 2 Sets of Omega Spring Replacement, 1 set of large size and 1 set of small size spring set for the Axis Lock on....
  • [DURABLE AND STURDY] – All the Omega Springs are made of high-quality 304 Stainless steel and heat treated appropriately..
  • [COMPATIBILITY] – The larger size Omega Springs are suitable for Benchmade Axis Lock 810 550 551 552 710 730. And the smaller size Omega Springs are....
  • [SPECIFICATIONS] – Spring wire diameter: 0.024 Inch (0.6mm). The Omega Springs length is about 1.06 Inch (27mm) and 0.87 Inch (22mm) respectively..
  • [GREAT REPLACEMENT CLIPS] – The Omega Springs are great aftermarket replacements accessories for your failure Omega Springs on Axis Lock. We can....
Check Stock

60W Mini Rotating Lathe,12000RPM Metal Rotating Lathe,Mini Lathe Machine Lathe Machine Tools,for Wood Metal Glass Plastic Machining

  • ?¡¾PRODUCT PARAMETER¡¿ ?Motor Speed: 12000rpm ? Input Voltage/Current/Power: 12V DC/5A/60W ?Axis X travel: 32mm.
  • Axis Z travel: 145mm ?Max Diameter of Machined Material: 100mm ? Machining Accuracy: 0.05mm..
  • ?¡¾MAIN PARTS¡¿ Headstock, tailstock, long machine bed, big slider, small slider, motor blade, gear, connection block, belt cover etc. All of the parts are made of metal except belt cover..
  • ?¡¾GOOD PERFORMANCE¡¿Maximum motor power is 60W by using more powerful motor.With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining..
  • ?¡¾POWERFUL FUNCTIONS¡¿Motor case and headstock are jointed. Axis Z slider can spin 180¡ã.Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal..
  • ?¡¾USE RANGE¡¿ Lathe tool is made of high speed steel material, which can machine soft metal, nonferrous metal and precious metal..
Check Stock

CREALITY Ender 3 S1 3D Printer (Upgraded Ender 3 V2) with Sprite Dual-Gear Direct Drive Extruder CR Touch Auto Bed Leveling Silent Board Filament Sensor Dual Z-axis High Precision 8.6x8.6x10.6inch

  • Sprite Direct Dual-Gear Extruder: The "Sprite" direct dual gear extruder developed by Creality 3D has two chrome steel gears that are switched with a gear ratio of 1: 3.5. With a force of up to 80N, the extruder achieves a smooth and even feed and extrusion of filaments without slipping and is ideal for printing flexible filaments such as TPU. With a weight of only 210g, the "Sprite" is lighter than other direct extruders and is characterised by lower inertia and more precise positioning..
  • CR Touch Auto Bed Levelling: The CRTouch 16-point auto levelling technology saves you from the effort of manual levelling. The intelligent levelling system automatically compensates for the print height of various points on the heated bed..
  • Removable PC Spring Steel Platform: The innovative printing platform is a combination of a PC coating, a spring steel plate and a magnetic plate that immediately adheres to the surface when it is detached. The PC coating ensures good adhesion and easy removal of the printed models by bending the surface..
  • Ultra-Quiet 32 Bit Motherboard：The brand new 32-bit silent board runs at low....
Check Stock

Ranbo 304 Stainless Steel Ball Bearing Heavy Duty Double Action Spring Loaded Door Swing Hinge,Automatic Closing/self Closer/Adjustable Tension Brushed Chrome(1 Pair) Thickness 3 mm (5 inch)

  • 2 Pack Dual Spring Self Closing Door Hinges, made of 304 Stainless Steel, surface brushed..
  • Size - Suitable door thickness: 30-46mm / 1.18 inch - 1.81 inch, 3/4 inches axis diameter, 1 piece maximum door weight：25kg/55lb.
  • Adjustable Spring, can change the closing speed. Using the hexagonal wrench, rotating clockwise hinges axis, adjusting closing door speed..
  • 180 degree Maximum rotation angle, Max 10 N spring force, can serve 30 thousands times..
  • 201 Stainless Steel Screws Included, corrosion resistant and anti-rust, ideal for swing doors, both direction opening, using in Cafe Saloon and so on..
Check Stock

4Pairs Omega Spring Replacement, 2-Size of Spring Sets, #1 for The Axis Lock on Benchmade 550 551 552 710 730 810, #2 for 555 556 557 707 940 535 533 810 550 551 552 710 730 Knives and More

  • Package: You will receive 8 pcs omega spring replacement with 2 size, 4 pcs for each size.
  • Material: 304 stainless steel with heat treated appropriately..
  • Compatiable with: The #1 omega springs replacement are suitable for benchmade axis lock 550 551 552 710 730 810. The #2 omega springs replacement are suitable for benchmade axis lock 555 556 557 707 940 535 533 810 550 551 552 710 730.
  • Size:spring wire diameter 0.024 Inch (0.6mm). The omega springs length is about 1.06 Inch (27mm) and 0.87 Inch (22mm) respectively..
  • The Omega Springs are great aftermarket replacements accessories for your failure Omega Springs on Axis Lock. We can refresh or revive your old knives, add years to the life of your old knives with very little time or effort, and save much money..
Check Stock

ALBATROSS Cool Flipper Axis Lock Opening Folding Pocket Knife with 3\ Modern VG10 Damascus Steel Blade and 4.25\ High Strength FRN Handle, Deep Carry Pocket Clip - Gifts Box/Collections (Green)

  • Flipper & Axis Lock - Flipper provide One-Hand Opening.
  • After opening, the Axis lock will be automatically locked, and the shark fin will ensure that you hold the knife in the correct position and protect your hand from injury,safe and convenient to use..
  • Modern Damascus Steel Blade - Damascus Steel Blade nicely hand forged with above (71) layers combining (high carbon steel & Low Carbon steel) with a durable nickel layer, our steel Blade has been given excellent heat treatment to get a (58to60) HRC, ensuring top functionality and longevity..
  • FRN Handle - The pattern made by the mold is on the FRN handle,with a hollow design, which is beautiful, lightweight, and prevent slippage of the hand..
  • Removable Deep Carry Clip - The left-handed or right-handed person,it can be installed to the front and back as you like, more comfortable to hold.
  • and you can hang it on your belt, backpack, etc,easy and safe carry..
  • EXQUISITE GIFT - We choose an orange stylish gift box for it.
  • Birthday Valentine Gift for Friends,Dad,Brother,Boss,Boyfriend,Husband,Ideal gift for Hunter,Fisherman,Camping Lover..
Check Stock