Categories

Best Steel Beam Brackets

Jungle Gym Kingdom 2 Pack Swing Set Brackets – Premium, Heavy Duty, Steel A-Frame Bracket w/ Hardware - Includes Wood Screws & Washers

  • Swingset Kit Includes Two A-frame Swing Set Brackets and Two Sets of A-frame Bracket Hardware, made of heavy gauge steel, solid welded joints, and a powder coated green finish will provide you with the brackets to build a top notch quality outdoor wooden swingset..
  • Each Jungle Gym Kingdom's welded, heavy- duty steel bracket is designed for two 4x4 treated posts, and one 4x6 treated post swing beam. These brackets include all wood screws and washers necessary to build your A-frame swingset. The hardware included is 3" lag screws and washers..
  • We recommend using only treated lumber (not included) to build your Jungle Gym Kingdom A-frame swingset. The lumber needed is 4 - 4x4 treated posts for the legs and 1 - 4x6 treated post for the top beam. Using only treated lumber with Jungle Gym Kigdom's heavy duty swing set brackets will ensure a top quality swing set to enjoy..
  • Jungle Gym Kingdom's brackets come with pre-drilled holes, and each Jungle Gym Kingdom steel bracket weighs approximately 10 pounds for maximum stability. Do not force lumber into the bracket, it should slide into the bracket with little force. If your treated lumber is still wet and “swollen”, it may create a tight fit in the bracket. If your treated lumber is dry, the wood will be eas....
Check Stock

Jack & June Heavy-Duty DIY Swing Set Bracket and Hardware for Safe Easy Playset Installation

  • DO-IT-YOURSELF BUILD — Building your own swing set has never been easier with Jack & June’s heavy-duty steel brackets. DIY kit is the safest and....
  • HEAVY-DUTY CONSTRUCTION — Heavy-duty swing set brackets are made of steel and protected with a powder-coated finish for performance and durability.
  • QUICK, EASY, AND SAFE INSTALLATION — Construct an A-Frame swing set in only minutes with included brackets and hardware. Slide beams into brackets....
  • INCLUDES ONE BRACKET AND HARDWARE – Brackets are sold individually.
  • this listing is for ONE bracket with hardware. Purchase two brackets to build an....
  • LUMBER AND SWINGS SOLD SEPARATELY — The lumber and swings are not included in this set. Jack & June recommends purchasing one 4x6 top beam and four....
Check Stock

Eastern Jungle Gym Heavy Duty Brackets (Pair) for Backyard Swing Set Horse Glider Seat - Adjustable to Mount to Any Size Wooden Swing Beam

  • Use these glider brackets to install one Horse Glider Swing Seat, easily mounts to a wooden swing beam.
  • Glider Brackets are constructed with heavy-duty steel and finished in a green powder-coating.
  • Each glider bracket is 18″ long and ADJUSTABLE to accomidate any size wooden swing beam, compatible with all swing set brands.
  • Includes four 2-1/2″ nylon bushing swing hangers for horse glider swing attachment, no additional parts required.
  • Includes hardware needed to mount to wooden swing beam up to 4″ x 6″ in size.
Check Stock

Swing Set Anchor Leveling Kit :: Includes Four Large Molded Rubber Blocks with Stakes and Hardware for Installation :: Keeps Your Swing Set Safe and Secure While Protecting Wood from Ground Moisture.

  • Swingset Kit Includes Two A-frame Swing Set Brackets and Two Sets of A-frame Bracket Hardware, made of heavy gauge steel, solid welded joints, and a powder coated green finish will provide you with the brackets to build a top notch quality outdoor wooden swingset..
  • Each Jungle Gym Kingdom's welded, heavy- duty steel bracket is designed for two 4x4 treated posts, and one 4x6 treated post swing beam. These brackets include all wood screws and washers necessary to build your A-frame swingset. The hardware included is 3" galvanized lag screws and galvanized washers..
  • We recommend using only treated lumber (not included) to build your Jungle Gym Kingdom A-frame swingset. The lumber needed is 4 - 4x4 treated posts for the legs and 1 - 4x6 treated post for the top beam. Using only treated lumber with Jungle Gym Kigdom's heavy duty swing set brackets will ensure a top quality swing set to enjoy..
  • Jungle Gym Kingdom's brackets come with pre-drilled holes, and each Jungle Gym Kingdom steel bracket weighs approximately 10 pounds for maximum stability. Do not force lumber into the bracket, it should slide into the bracket with little force. If your treated lumber is still wet and swollen, it may create a tight fit in the bracket. If your treated lumber is dry, the ....
Check Stock

BETOOLL Swing Set Bracket with All Mounting Hardware Middle Bracket

  • BETOOLL Swing Heavy Duty Steel Bracket: Made of 100% Steel to build the strongest and safest A-frame construction..
  • What You Get: 1 Swing set Middle Bracket,16pcs wood screw and 16pcs washers. BETOOLL 90 degree angle swing middle bracket set comes with all mounting....
  • Easy to install: Firstly put two top beam in both ends of swing middle bracket.
  • Secondly simply slide the 4x4 legs into the brackets with the beam....
  • As for Lumber Size---We recommend using Two kiln-dried 4x6" top beam (with a true measurement of 3-1/2" x 5-1/2") and Two kiln-dried 4x4" (with true....
  • About rust and decay: both inside and outside all painted well to against them and keep good looking..
Check Stock

Eastern Jungle Gym Easy 1-2-3 A-Frame 2 Brackets for Swing Set with All Mounting Hardware, Green

  • Includes 2 (TWO) A-Frame Swing Set Brackets and 2 (TWO) sets of A-Frame Bracket Hardware – EVERYTHING you need to construct a Free-Standing A-Frame Swing Set.
  • Our brackets are a solid, one-piece design, open-ended and constructed with heavy-duty steel and welded seems for the strongest and safest construction.
  • Brackets are finished in a power-coated green color and Eastern Jungle Gym's signature yellow tag to ensure 100% authenticity and our warranty.
  • Includes all hardware needed to build a DIY A-Frame Swing Set. We provide all the hardware needed to install both swing set brackets (28 – 5/16" x 3" zinc-coated steel lag bolts and 28 – washers).
  • Lumber is not included in this kit. We recommend using one 4x6 120" top beam (3.5" x 3.5" x 120") and four 4x4 96" (3.5" x 3.5" x 96") side support legs to construct a basic A-Frame with the finished dimensions of 12'Lx8'Dx7'8"H.
Check Stock

6 PCS Deck Joist Tie, Steel Z Bracket Tie Plate Fit 2x4 Cross Joist and 4x4 Post , 14 Gauge Metal Joint Corner Brace Support Pergola Brackets for Roofing Trusses Wood Timber Connectors

  • 6 PCS Z Brackets Deck Joist Tie Plate, Carbon Steel + Hot Dip Galvanized.
  • Fit minimum 2"x4" joist and 4"x4" post.Applicable beam thickness: 1½-1⅝ inches (38-40mm).
  • Length: 3¼"(82 mm), Height: 1½"(38 mm), Width: 3"(76 mm), Thickness: 14 Gauge (2 mm).
  • Mounting Holes Size: Φ4mm,Φ13mm,Φ10.5 mm.
  • Pergola Brackets Post to Beam Connectors. Anti-corrosion, wear resistance, anti-rust. Smooth surface and edges without burrs..
Check Stock

4 E-Track Wood Beam End Socket Shelf Brackets w/ E Track Fittings, for 2x4 & 2x6 in Truck, Trailer, Van, RV, Cargo Tie-Down Systems, ETrack Tiedowns for Custom Load Bar, Handmade Cabinet, Shelves

  • The Simplest Way to Create Shelves: Add adjustable and removable shelving to your enclosed cargo trailer with sturdy steel ETrack shelf brackets..
  • Add Flexibility To Your Trailer: Raise, lower, or remove structures entirely as your trailer storage and organization needs evolve..
  • Installs in Seconds: Mount and remove these E-Track accessories wood beam sockets by clipping the E-Track fitting in and out of any E-Track rail..
  • Precision Design: (4) Zinc-coated steel standard E-Track wood beam sockets require 2x4 or 2x6 lumber beams.
  • two ¼” bolt holes for securing beams..
  • 1-Year Warranty: E-Track brackets backed by DC Cargo Mall, manufacturer of innovative cargo systems for trucks and trailers..
Check Stock

vikofan 4 Pcs EZ Frame Bracket Fit for Swing Set Swing Beam

  • The EZ Frame Bracket is a fast and simple way to build an A-frame wooden swing set..
  • Package Incuded：4 brackets (NOTE: two brackets are required for a complete A-Frame construction) and fully illustrated instructions.Not included screws required..
  • The Frame Bracket made of rust resistant steel with a green powder coated finish to prevent rust..
  • Efficient Design:The 90 degree 2" lip supports a swing beam..
  • Easy to install:The EZ Frame Bracket saves you time by eliminating the need for miter cutting..
Check Stock

LivTee 4 Holes Stainless Steel License Plate Frames, 2 PCS Car Licence Plate Covers, Automotive Exterior Accessories Slim Design with Bolts Washer Caps for US Vehicles, Multi

  • LED:flood beam(60 degree) and spot beam(30 degree) combo,high-quality Led chips and clear PC lens,super bright pure white 6000K light dispels darkness..
  • Slide Brackets Adjustable:Mounting light bar you can choose most fitment on your car,for our slide brackets design.Choose any lighting beam protects you safe,which makes changing direction of light beam easier..
  • Protection Assurance:(DOT Approved) Dual row straight diecast aluminum housing.
  • The sturdy adjustable bracket can firmly fix the light bar.
  • Quakeproof when passing through rugged terrain.ONE YEAR WARRANTY..
  • Wide Application：Universal Mounting Brackets are included, easy set up to any mounting holes and openings with standard base mounts,can be applied to any kind of cars such as 9-30V automotive vehicles, perfect for boat, truck, tractor, off road,pick up, SUV, ATV, UTV, motorcycle and heavy machine etc..
  • Package included:1 x 288W 50 inch led light bar&1 x 126W 20 inch led light bar+4 x 4inch led light pods necessary screw and mounting bracket.
Check Stock

Fleming Sales 52321 Bumper Grill Arm Assembly

  • Made of black powder-coated, 14 gauge steel.
  • Mounts on any 4" box beam bumper with U shaped brackets providing secure attachment.
  • Arm pivots in 2 points, allowing the arm to extend up to 40" away from the coach.
  • Lynch pin is provided to lock the arm in place while in use or for travelling.
  • For use with Sidekick Grills or Bumper Grill Table or Stainless Steel RVAD 650 LP Gas Grill.
Check Stock

LED Driving Light Pods Bar, Lightboss Round 4.5 Inch Fog Lights White Beam with Amber DRL, Strobe Beam 12V-80V for Car ATV UTV Forklift Boat UTV Jeep Golf Cart Offroad Driving Tractors Working, 2PCS

  • ... special vehicles like golf carts with 12V 24V 36V 48V 60V 72VDC such as 4x4 off-road driving, tractors farming, working, and warning..
  • [ All-Weather Working ] Aluminum housing for fast heat elimination. High transparency PC optical lens and silica gel cable work perfectly from -40 to 80 Celsius. 316 stainless steel brackets have a longer lifetime than normal light pods when the LED pod lights are used in salty air..
  • [Pack Includes ] 2packs of Round LED offroad lights, 2 packs of mounting brackets, and hardware.
  • ✅ WARM TIPS: 3-lead wiring harness to run these light pods with strobe function is NOT included..
Check Stock

Antsky 4x4(Actual: 3.5x3.5) 4-Way Right Angle Corner Brackets with Flange Anchor Bases，Stainless Steel Pergola/Gazebo Kit Hardware(2 Pack)

  • Material：304 stainless steel, black finishing；.
  • Actual inner size：3.6×3.6inch（91.5mm）,This size applies to nominal standard 4"x 4" wooden post (actual 3.5"x 3.5" post on market).
  • there is a slight error in the actual size, usually the error is about 1mm.
  • Each angle of corner connector is 90 degrees.
  • This package comes with two 4-way right angle corner brackets, 2 post flange anchors, 80 SS hex screws and 8 SS concrete anchor bolts.
  • This 4-way corner brackets are multi-functional, can be used for building pergola、gazebo，playhouse、tree houses、log cabin and so on；.
  • These 4-way right angle corner brackets and the flange anchors make the installation very simple and easy. It's made of stainless steel, which is very sturdy and anti-rusty. The structure designed for covering the whole end of wood beam, so that the wood won't rot by years of rain and sun..
Check Stock