Categories

Best Steel Bearing Oil

Prime-Line GD 12234 Garage Door Torsion Spring, .250 inch x 2 inch x 32 inch, Green, Right Hand Wind

  • Torsion Springs Single Left 243 x 2" with Winding Rods Center Steel Bearing.
  • Includes spring left, steel bearing and winding bars.
  • Springs are made in the USA using Oil Tempered.
  • You will receive only ONE (1) bushing or bearing with a pair of springs.
Check Stock

Senston Ceramic Skateboard Bearings High Speed Double Shielded 608 RS ABEC-11 8 Pack Set for Skateboard Trucks Scooters Wheel Roller Skate

  • What you get: 8 pcs 608-2RS ceramic ball bearing in a steel box.Made of high quality carbon steel with long durability with heavy load and strong resistance for daily use impacts..
  • Standard solid bearing: All size in standard 22*8*7mm, black chrome shell never fray or stain. Pre-lubricant ceramic ball can run more smooth and longer than ordinary steel ball bearings. Nylon ball base can suffer more bump or fall..
  • Smart design for strong bearing: Double rubber shield cover in bronze, resist outside impact, prevent dust or sand and stone from breaking into bearing, damage ball inside. ABEC-11 certification made it better than any other competitors you ever seen..
  • Widely use: Not only this set of ceramic 608 2RS bearing for skateboard, it can apply widely on sports like kick scooter, roller skate and so on, but also on your life: spinner, baby stroller, hand cart, truck dolly. It’s your best option when you want to have some 608 bearings..
  • Reminder: The bearings is made with slight lubricant oil, change bearings with gloves to prevent moist from your hand for better performance..
Check Stock

SKF NU 1010 ML - Cylindrical Roller Bearing - Straight Bore, 50 mm ID, 80 mm OD, 16 mm Width, C0 Internal Clearance

  • Bearing steel long life bearing, smooth, low noise..
  • Single row cylindrical roller bearings , please add lubricating oil or grease when using,Straight bore for fitting on a conventional cylindrical shaft.
  • N206M NU206M NJ206M NF206M NUP206M (inner diameter = 30 mm, outer diameter = 62 mm, thickness = 16 mm)..
  • Notice Notice Notice: Because RN206 has no bearing outer ring, so its outer diameter is not 62mm..
  • Notice Notice Notice: Because RNU206 has no bearing inner ring, so its inner diameter is not 30mm..
Check Stock

Yiliaw Stainless Steel Outdoor Grappling Hook with 50FT Rope/Climbing Claw/Gravity Hook/Flying Tigers/Aquatic Anchor Hook for Your Outdoor Life,Hiking,Tree Limb Removal

  • Grappling Hook SIZE: 7.5in (L)x5.9in (W)x0.32n (D).
  • weight: 10.44 oz,Rope is a gift Not recommended for heavier objects ,White Rope length 50FT, diameter 0.28in.
  • SAFETY PERFORMANCE: 304 stainless steel spring steel, casting molding, claw oil quenching after high temperature heat treatment, high hardness, good wear resistance, suitable for high strength environment, with the use of bold ring design, suitable for various types of Rope.
  • BEARING: hook ring adopts carbon spring steel and tool steel materials, according to the proportion of mixed hand forged into ring shape, but also used the technology of oil quenching steel both flexible and rigid.
  • Perfect for outdoor activities,climbing tree, anchoring, fishing,disaster relief,cleaning up the weeds,pull down tree limbs,grapple falling objects,etc,Be careful when you open the package as the claw is a little sharp.
  • Versatile – Tree climbing, fetch, drag and pull tree brunches, tree limb removal, landing fish from dock, drop down and retrieve fish, clean the floating glass in the pond, grab and hook the falling items etc.Use your imagination to develop more functions..
Check Stock

Bones Super Reds Skateboard Bearings 8 Pack

  • 1.Specification model: 608ZZ inner diameter: 8mm, outer diameter: 22mm, thickness: 7mm. Each 10pcs bearing is sold in one package..
  • 2. Material characteristics: This product is made of high quality carbon steel. High speed operation, low noise, high temperature resistance and smooth rotation..
  • 3. Scope of application: for small motor, air conditioning, skateboard, roller skates, inline roller skates, scooters and small household appliances..
  • 4. Sealed structure: This bearing USES double-sided iron dust cover.
  • Effectively prevent dust and debris from entering.
  • Protect lubricating oil against loss. Reduce bearing noise to ensure normal operation..
  • 5. Service guarantee: If you have any questions after purchase, please contact us in time. We will serve you wholeheartedly..
Check Stock

Yiliaw Stainless Steel Outdoor Grappling Hook with 50FT Rope/Climbing Claw/Gravity Hook/Flying Tigers/Aquatic Anchor Hook for Your Outdoor Life,Hiking,Tree Limb Removal

  • Grappling Hook SIZE: 5.1in (L)x 5.1In (W)x 0.24in (D).
  • weight: 4.27 oz,Safety rope is a gift Not recommended for heavier objects ,Green safety rope length 50FT, diameter 0.2 in.
  • SAFETY PERFORMANCE: 304 stainless steel spring steel, casting molding, claw oil quenching after high temperature heat treatment, high hardness, good wear resistance, suitable for high strength environment, with the use of bold ring design, suitable for various types of Safety rope.
  • BEARING: hook ring adopts carbon spring steel and tool steel materials, according to the proportion of mixed hand forged into ring shape, but also used the technology of oil quenching steel both flexible and rigid.
  • Perfect for wilderness survival activities, outdoor adventures, climbing tree, anchoring, fishing,disaster relief,cleaning up the weeds, pull down tree limbs,grapple falling objects,etc,Be careful when you open the package as the claw is a little sharp.
  • Versatile - Tree climbing, fetch, drag and pull tree brunches, tree limb removal, landing fish from dock, drop down and retrieve fish, clean the floating glass in the pond, grab and hook the falling items etc.Use your imagination to develop more functions..
Check Stock

KVENI Premium Skateboard Bearings, Pro-Longboard Bearings, High-Speed 608rs-Ball Skate Bearing ABEC – for Skateboard, Quad Skate, Inline Rollerblades, Scooters Wheels and Spinners (Pack of 8) (Black)

  • 1.HIGH QUALITY AND SMOOTH: KVENI skateboard bearing is made of high quality carbon steel and stainless steel ball ,the bearings of skateboard meet international ABEC standards, high quality, high speed , low friction, it will give you a smoother feeling..
  • 2.PRECISION FITMENT :The ball bearing size is 608s and measures 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle)and(8 pack of skateboard steel bearings). Able to fit perfectly with most of the wheels on the market..
  • 3.SCOPE OF APPLICATION：KVENI steel skate bearing make you enjoy longer spins for your skateboard wheels, mini cruiser, longboard, kick scooter, trike, inline skates, roller skates, fidget spinner and more..
  • 4.BLACK UNIQUE COLOR SEALS: This waterproof skateboard bearings easy to disassemble and clean and protection from dirt, rocks, dust, Pre-lubricated with speed oil to lengthen the life of the bearing and maintain precision..
  • 5.AFTER-SALE SERVICE：If your longboard bearings have any quality problems, please contact us, we will offer you hassle free replacement or money back during the week. Fast delivery and 100% satisfaction guarantee, friendly customer support for you. Compare with similar items.
Check Stock

Recajia Universal 6 Hole Flywheel Rotor Magneto Puller Tool with 5mm Diameter and 6mm Bolts

  • [No Oil Leakage] - The hydraulic puller is forged with high-quality steel and cast in one piece. There is NO need for sealing rings and NO oil leakage. And the hydraulic cylinder is thickened with a strong pressure resistance..
  • [3 or 2 Jaws Interchange] - 3 jaws / 2 jaws can be easily interchanged can be easily interchanged, and can also be used Horizontally or vertically, without site restrictions. It is flexible to operate and easy to replace..
  • [Complete Accessories] - This 3 in 1 bearing puller set integrates pump, tubing, and drawing machine, which includes: 1 x hydraulic cylinder, 1 x handle, 3 x jaws, 6 x pulling tabs, 6 x screws, 1 x spring thimble, 1 x pull ring, 1x portable thickened plastic box..
  • [Wide Applications] - The bearing separator is widely used in various places. Such as truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly.
  • railway vehicle, factory machinery and mining equipment maintenance, etc..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the hydraulic puller, you can replace it for free..
Check Stock

Dsenfurn [20 Pack] 608-2RS Ball Bearings Skateboard Bearings Double Rubber Sealed Miniature Deep Groove Ball Bearings for Skateboards, Inline Skates, Scooters, YoYo - 8mm x 22mm x 7mm, Bearing Steel

  • [ Dsenfurn Ball Bearings ] : if these 608 bearings isn't in line with your expectations, please feel free to contact me. Your purchasing in Dsenfurn is NO RISK, to shop at ease..
  • [ Bearings Package and Size ] : 608-2RS steel ball bearings package included: Pack of 20 pcs, bearing size: 0.87 x 0.31 x 0.28 inches (8x22x7mm), ball bearing type: double-rubber sealed deep groove..
  • [ 608 2RS Bearings Material ] : The bearings is made of high quality bearing steel, it has durability and resistance to rust, corrosion and deformation under heavy load. The small bearing has sealed rubber covers on both sides to prevent the entry of liquid pollutants such as water mist and oil..
  • [ Widely Use ] : These 608 bearings are suitable for skateboard, longboard, roller skate, rollerblade, fidget spinner, inline skate, scooter, yoyo or other skating applications and toys..
  • [ Attention ] : The ball bearing has a revolutions per minute (RPM) limit of 3,000 - 5,000. Our bearing surface is not greased, please do not put it in a humid place to prevent rust. Please wear gloves when in use to avoid sweat and stains on your hands from corroding the bearings..
Check Stock

MAGICYOYO Professional Yoyo Shark Honor N12 Yoyo Long Time Spinning Yoyo, Sand Blasted Finish Yoyo with Yoyo Strings, Yoyo Holster, Yoyo Glove (Blue)

  • Professional Unresponsive Magicyoyo N12 Shark Honor - Made of Alloy 6061, Butterfly body shape, sand blasting finish, has a reputation for its stability and ultra-smooth performance. It's BIND RETURN required yoyo.Great pro unresponsive yo-yo for those Intermediate, Expert, and Advance players with style string yoyo tricks (1A, 3A, 5A). For entry-level unresponsive yoyo players, We recommended to learn more yo-yo skills on YouTube..
  • Beautiful Sand blasting finish blue color.
  • Kk bearing,alloy6061 material,make for 1A/3A/5A.
  • Design for finger spins, long time sleep. Steel axle for smooth spinning. Note: After 15 minutes of use, please Add Yoyo Bearing Oil to lube the bearing to extend bearing life. Can search and buy yoyo bearing lubricant on Amazon, it helps lubricate ball-bearing axles on yoyos to increase both spin and response times and help your bearing last longer..
  • Include Magicyoyo N12 blue Yoyo + 1 Yoyo Bag+ 1Yoyo Glove + 5 Yoyo Replacement Strings.
Check Stock

Amphetamine HIGH Performance Inline Skate Ceramic Hybrid Bearings

  • SPEED - Amphetamine Hybrid Ceramic bearings are capable of high speeds with a high level of durability and longevity at a fraction of the cost..
  • CONSTRUCTION - Hybrid Ceramic bearings feature 1 ceramic ball and 6 precision steel balls. The single ceramic ball pulverizes dirt which keeps bearings clean. The single ceramic ball keeps cost down compared to full ceramic bearings..
  • FEATURES - Hybrid Ceramic bearings offer the durability of a steel bearing with the speed of a ceramic bearing. Hybrid bearings offer performance on a budget..
  • PRE-LUBRICATED - Amphetamine bearings are pre-lubricated with Amp Synthetic Speed Oil and are ready to provide high speeds straight out of the package..
  • INCLUDES - 16 Bearings which is enough for 8 wheels. These bearings are size 608, which has a 22mm OD (Outer Diameter) and 8mm ID (Inner Diamter/Opening Hole Size)..
Check Stock

KNIPEX Tools - Pliers Wrench, Chrome (8603250), 10-Inch

  • 【APPLICATION】 Spreading both soft iron horseshoe lock washers used on brakes and tempered steel lock rings used on gear and bearing shafts..
  • 【DESIGN】 Plastisol grips for anti-slip and added comfort. Spring loaded action reduces muscle fatigue for easy one-handed operation..
  • 【MATERIAL】 Premium top-quality chrome vanadium steel, drop forged and heat treated for strength and durability, additional black oxide finishing improves the corrosion resistance of the surface and effectively prolongs service life of the plier. The antirust oil may be appeared on the tools, it will not effect the function..
  • 【DIMENSION】 200 x 100 x 12.5mm / 7.87" x 3.94" x 0.49"..
  • 【ANTI-RUST OIL】 The antirust oil may be appeared on the pliers, it can protect the pliers from rusting. It's not dirty or used products, you can clean it with a towel and it will not effect the function..
Check Stock

Hypertune Universal Two Jaw Pilot Bearing Gear Puller Bearing Gear Remover Tool Carbon Steel Adjustable Pump Pulley Remover Hand Tool Removal Kit Straight Type 3 38x65mm

  • 【WIDELY FITTMENT】Universal for automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing, etc..
  • 【USAGE SCENARIO】Into Tight Areas bearing gear remover can remove gears, pulleys, and flywheels off a shaft in hard-to-reach spots without damaging your application..
  • 【USEFUL DESIGN】Adjust screw design, flexible and convenient to repair different size gears and bearings..
  • 【HIGH-QUALITY MATERIAL】Made of high-quality carbon steel, durable and not easy to rust..
  • 【CAUTION】There will be lubricating oil on the surface of the product, please wear gloves before use..
Check Stock