Categories

Best Steel Bolt

Tolsen Bolt Cutters Heavy Duty, 36-Inch Bolt Cutter for Padlocks, Lock Cutter Heavy Duty Chain, Rods, Rivets, Locks and Wire Cutter - Ergonomic Non-Slip Handle Bolt Cutter - 36 Bolt Cutter

  • [HARD STEEL JAWS] This heavy-duty bolt cutter is made of strong, drop-forged hardened steel jaws for long-lasting blade life and has an adjustable bolt mechanism for proper blade alignment..
  • [CUTS THICK STEEL] Designed and manufactured for maximum durable blade life. The bolt cutter strong jaws can cut 3/8-inch low-carbon steel and 5/16-inch medium-carbon steel in industrial jobs. Great for cuts bolts, chain, threaded rod, cable wire and more.
  • [CENTER CUT DESIGN] Centered blades with slightly rounded cutting edges that are beveled on both sides to cut with precision. The jaws are adjustable and replaceable. Cut through soft, medium and hard metals with confidence using these bolt cutters..
  • [ERGONOMIC GRIPS] Our bolt cutter features ergonomic handles and comfortable nonslip rubber grips fit down over steel handles for enhanced strength and comfortable controlled cutting of metals..
  • [100% SATISFACTION GUARANTEE] You are protected with our 100% No Questions Asked Guarantee for either a replacement or refund. We love Our customers that’s why we care about only putting out high quality products that satisfies your needs.
Check Stock

Head Bobbin Fists Up 13 Metal Drum Loop

  • constructed of first quality cold rolled steel with rust inhibitor interior..
  • supplied with bolt type locking ring closure, bolt, nut and gasket cover..
  • designed, manufactured, and certified to meet UN requirements for hazardous materials under DOT 49 CFR. The UN Ratings are 1A2/Y1.8/200 & 1A2/X400/S..
  • Steel drums are environmentally friendly since they can be recycled, reconditioned and re-purposed..
  • bolt ring closure, sponge rubber gasket and plated bolt/nut provide a tight seal to help prevent leaks and spillsInterior is coated with a corrosion inhibitor.
Check Stock

Head Bobbin Fists Up 03 Metal Drum Loop

  • constructed of first quality cold rolled steel Non-Lined Interior.
  • supplied with 12 gauge bolt type locking ring closure, bolt, nut and gasket cover..
  • designed, manufactured, and certified to meet UN requirements for hazardous materials under DOT 49 CFR. The UN Ratings are 1A2/Y1.8/200 & 1A2/X400/S..
  • Steel drums are environmentally friendly since they can be recycled, reconditioned and re-purposed..
  • 12-gauge bolt ring closure, sponge rubber gasket and plated bolt/nut provide a tight seal to help prevent leaks and spillsInterior is coated with a corrosion inhibitor.
Check Stock

Head Bobbin Fists Up 01 Metal Drum Loop

  • constructed of first quality cold rolled steel Non-Lined Interior.
  • supplied with 12 gauge bolt type locking ring closure, bolt, nut and gasket cover..
  • designed, manufactured, and certified to meet UN requirements for hazardous materials under DOT 49 CFR. The UN Ratings are 1A2/Y1.8/200 & 1A2/X400/S..
  • Steel drums are environmentally friendly since they can be recycled, reconditioned and re-purposed..
  • 12-gauge bolt ring closure, sponge rubber gasket and plated bolt/nut provide a tight seal to help prevent leaks and spillsInterior is coated with a corrosion inhibitor.
Check Stock

3" 2 Bolt Flange Catback Exhaust Muffler Pipe Extension Flange Steel Adapter

  • Material: Made of multi layer stainless steel and graphite, which is durable and directly to replacement easily.
  • Bolt hole center spacing 105mm/4.13".Minimum inner bolt to bolt distance of 90mm/3.55" Maximum outer bolt to bolt distance of 121mm/4.76".
  • Package Included: 2 * high temp exhaust gasket.
Check Stock

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

  • ...ove Harmonic Balancers] Use the ABN 46 Piece Harmonic Balancer Puller Kit - Flywheel Puller, Crank shaft Pulley Puller, Steering Wheel Puller Set to apply even pressure to the hub so you can safely remove harmonic balances and other vehicle parts.
  • [Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles.
  • [Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • [Built to Last] Heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch pressure screw, ....
Check Stock

ATPEAM 46pcs Harmonic Balancer Puller Set | Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

  • Extra Last: The Steering Wheel Puller Kit is made of heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • Mutiple Use: The harmonic balancer puller includes 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications..
  • Various Bolt Sizes Added: 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • Wide Compatibility: The ATPEAM crankshaft pulley puller features a steel yoke with four slots enabling use on nearly any vehicle configuration..
  • The Wheel Balancer Gear Puller Set Includes: (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.
Check Stock

Precision 40mm Wastegate Inlet Flange

  • ▶️ High strength cast steel body with steel head.
  • ▶️ Bolt-on design, fits any 40mm turbo manifold bolt-on wastegate port.
  • ▶️ Bolt-on housing design for secure spring changing and adjustment.
  • ▶️ High pressure reinforced and temperature resistant actuator diaphram included.
  • ▶️ Comes with 10 psi spring installed.
Check Stock

4 Sets 304 Stainless Steel Square U-Bolt Boat Trailer U-Bolts with Washers and Nuts L Heavy Duty U Bolts for Sailboat Trailer Automobiles Trailer Industrial Parts 1/2 D x 3 1/16 W x 4 5/16 Inch

  • Package includes: stainless steel u-bolt set include 4 pieces u-bolts, 8 pieces stainless steel flat washers, 8 pieces stainless steel nylon lock nuts, 8 pieces lock washers, all accessories are made of 304 stainless steel.
  • U-bolt size: 1/2 x 3-1/16 x 4-5/16 inch (D x W x L), thread length: 2-1/2 inches, suitable for 3 x 3 inch square beams and shafts.
  • Stainless steel material: u bolts for boat trailer are made of 304 stainless steel, strong and long-lasting.
  • These 304 stainless bolts prevent rust corrosion, acid corrosion and wear.
  • It's still perform well in rainy and humid seaside environment.
  • How to use: firstly choose the corresponding square U shaped bolt according to the size of the pipe, then drill holes in the connection, and finally lock nut and flat washer.
  • Use a hand wrench or socket ratchet when installing nuts.
  • Do not use an impact or a high speed socket driver.
  • Wide application: square u-bolt is applied to fix or connect the locked parts to rectangular wood and metal objects, such as cars, sailboat trailers, pipe, tube, plumbing and other industrial applications.
Check Stock

NEW 55-57 CHEVY FACTORY REPLACEMENT CLUTCH PEDAL CROSS SHAFT BOLT AND BUSHING KIT PUSH ROD TRI-5 1955 1956 1957 150 210 BEL AIR NOMAD SEDAN DELIVERY DEL RAY

  • Brand New Southwest Speed Factory Replacement Clutch Pedal Cross Shaft Bolt and Bushing Kit that fits 1955-1957 Tri-Five Chevy's with Manual....
  • This Southwest Speed clutch pedal cross shaft bolt and bushing kit are a reproduction of the original clutch pedal push rod bolt and bushing used on....
  • This kit includes a steel shoulder bolt, two delrin bushings, 3 flat washers, and an nylon locking nut > The shoulder bolt and bushings will look,....
  • Features: > Steel shoulder bolt with black oxide finish > Factory reproduction > Corrosion-resistant lock nut with nylon insert > Required for....
  • Applications: > 1955-1957 Chevy Bel Air > 1955-1957 Chevy 150 > 1955-1957 Chevy 210 > 1957 Chevy Del Ray > 1955-1957 Chevy Nomad > 1955-1957 Chevy....
Check Stock

Drummer Octopus T-Shirt - Funny Drumming Drums Metal Shirt T-Shirt

  • constructed of first quality cold rolled steel Non-Lined Interior.
  • supplied with 12 gauge bolt type locking ring closure, bolt, nut and gasket cover..
  • designed, manufactured, and certified to meet UN requirements for hazardous materials under DOT 49 CFR. The UN Ratings are 1A2/Y1.8/200 & 1A2/X400/S..
  • Steel drums are environmentally friendly since they can be recycled, reconditioned and re-purposed..
  • 12-gauge bolt ring closure, sponge rubber gasket and plated bolt/nut provide a tight seal to help prevent leaks and spillsInterior is coated with a corrosion inhibitor.
Check Stock

Vera Bradley Keychain, Ginger Snap

  • Made in the USA with globally sourced materials and lasts up to 10x longer.
  • High quality import designed by the company that invented the original key security device.
  • Strong nickel plated bolt snap attached to 1 inch (2.5 cm) leather split ring holder.
  • Bolt snap allows keys to be removed easily, measures 5 inches (12.7 cm).
  • Nickel plated tempered steel 1.25 inch (3.2 cm) split-ring returns to original shape after expansion.
Check Stock

Carriage Bolt 18-8 Stainless Steel 1/2'-13 x 18' Qty-25

  • A carriage bolt has a domed or countersunk head and the shank is topped by a short square section under the head of the bolt..
  • The square section grips into the part being fixed, preventing the bolt from turning when the nut is tightened..
  • Carriage bolts are often used to fasten wood panels or board to masonry or to one another..
  • The square shank of the bolt allows it to lock into place when inserted into a round hole in wood or a square hole in a metal strap, the unthreaded square shank pulls into the wood creating a tight connection..
  • 18-8 Stainless steel is corrosion and rust resistant. 18-8 Stainless steel is considered the fastener industry standard..
Check Stock