Categories

Best Steel Bushing Inserts

Hex Bushing 1 Male x 1/2 Female Brass for Repair Threaded Pipe Fitting Pack of 1

  • ENHANCED QUALITY BRASS Makes Hex Bushing Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Hex Bushing have 1" Male....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our Hex Bushing can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices, Collectors, etc.
  • DURABLE –Our Hex Bushing don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings. N.
Check Stock

Martin 3020 2 Taper Bushing, Sintered Steel, Inch, 2\ Bore, 4.25\ OD, 2\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 1008 5/8 Taper Bushing, Sintered Steel, Inch, 0.62\ Bore, 1.386\ OD, 0.875\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 2 7/16 Taper Bushing, Sintered Steel, Inch, 2.44\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 5/8 Taper Bushing, Sintered Steel, Inch, 1.63\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 1/8 Taper Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

TIME-SERT M8x1.25 Thread Repair kit P/n 1812

  • Time-Sert M8x1.25 thread repair kit P/n 1812.
  • Includes, Drill, conterbore, tap, install driver 5 inserts 11.7mm length.
  • The best thread repair on the market today!.
  • Solid bushing, self locking, positive placement repair.
Check Stock

Hornady Lock-N-Load AP Press Loader – Ammunition Reloading Press with Quick Change Lock-N-Load Bushing System, EZ-JECT System and Powder Measure – Enjoy Fast and Reliable Reloading – Item 095100

  • Lock-N-Load Auto Progressive Reloading Press – Reload up to 500 rounds per hour with this professional grade, auto indexing, 5 station progressive press that features the patented Lock-N-Load bushing system. This must-have Hornady reloading equipment is intuitive and well equipped for all your reloading needs.
  • Fast Reloading – Lock-N-Load technology allows you to stop loading, change dies and start loading another caliber in a matter of seconds thanks to the 5 station bushing system. Switch from 223 to 45 in less than 5 minutes.
  • Quick and Reliable Ammunition Press – The Lock-N-Load powder measure uses quick change metering inserts that allow you to switch from one powder to another with a push of a button. The EZ-JECT system ensures a reliable ejection of cartridges, every time without adjustments.
  • Smooth and Precise – With a single pull of the handle, you’ll feel the smooth responsiveness, the rugged construction, and most of all, the power on this single stage reloading press! And since the AP features automatic indexing, priming and ejection, every pull of the handle give you a precisely loaded round.
  • What's Included – Hornady AP Press Item 095100. Includes 5 Lock-N-Load Die Bushings, 1 large cartridge bin, primer pickup tubes, metering in....
Check Stock

Gold Tip GT Series HD Pin Nocks (Pack of 12), Flo Green

  • Recommended for bows shooting over 280 FPS.
  • Gold Tip's threaded inserts are precisely machined from only top-grade materials.
  • Quality controlled to industry-leading specification tolerances.
Check Stock

Door Pin Guides Hinge Liners and Door Bushing Removal Tool Kits (8 Door Pin Guides) 17Pcs For 2007-2020 Jeep Wrangler JK JKU JL JLU

  • DURABLE MATERIA:The Door Bushing Removal Tool was constructed with strong iron.Advanced CNC machined aircraft grade stainless steel structure guides and durable ABS plastic integral molding process bushings, anti-corrosion and never rust..
  • FITMENT:Fit for Jeep Wrangler JK, JKU, JL, JLU, Sports, Sahara, Freedom, Rubicon, Unlimited 2007-2020. (Door Bushing Removal Tool did not fit TJ).
  • WIDELY USEFUL:These door pin guides help you line up your door pins and put your doors back easily.The door bushing removal tool helps to remove your Jeep corrosive hinges.By using the door pin guides align the top cap and lower the door so that the bottom is in place. By using a hammer, to tap the door bushing removal tool until the OE liners are totally removed..
  • QUANTITY INCLUDED:8*Door Pin Guides,8*Door Hinge Liners,1*Door Bushing Removal Tool..
  • 100% SATISFACTION:If you are not satisfied with our kit,please contact us,we will try our best to solve your problem..
Check Stock

O'SKOOL Self Centering Dowel Jig Kit Drilling Guide Bushings Set Wood Wide Capacity Doweling Jig Puncher Locator Joints Tool

  • Guide hole sizes are 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch and 1/2-Inch. Package induldes: Dowel jig x1.
  • Our jig is patented and easy to adjust ,and can be clamped on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling and wood board joints, it is an ideal tool for panel furniture..
  • The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • The drilling bushing is made of high-quality materials, with high strength and accurate positioning. When using a hand held drilling machinel, the countersunk drill bushing allows the drill bit to slide into the hole easily, ensuring the correct angle of the drill bit..
  • There are 4 holes along the top of the jig, only 2 of the holes accept threaded bushings(Replaceable 1/4" 3/8" 5/16").the other two holes accept 7/16" and 1/2" drill bits..
Check Stock