Categories

Best Steel Bushings

Prime-Line K 5131 White Storm Door Hinge Pin Kit (3-Pack)

  • Used as replacement door hinge pin kits for Croft storm doors and a variety of other storm door manufacturers.
  • Steel spring and nylon pins and bushings.
  • Kit contains 3 springs, 6 pins and 6 bushings.
  • Easy to install in less than 30 minutes with a few simple tools.
Check Stock

VMS RACING FRONT and Articulated Stainless Steel REAR LOWERING KIT Bolts and Bushings Compatible with Chevy Chevrolet Corvette C5 97-04 1997-2004 Complete Set

  • [ IMPORTANT ] VMS RACING Brand (NOT generic). Comes in VMS RACING Branded BOX. Brand New in Box / Never Used / Never Installed..
  • VMS Racing 14-piece Kit includes PREMIUM QUALITY, Grade-8 Bolts, Heavy-Duty Polyurethane Bushings, heavy-duty washers and Nylock nuts for the REAR. The FRONT is made of 100% CNC-machined STAINLESS STEEL with DELRIN BUSHINGS, WRENCH FLATS and ARTICULATING BALL STUD FOOT PADS for perfect alignment and smooth suspension travel..
  • Designed to lower your Corvette C5 up to 1.0 inch in the REAR and up to 1.5 inches in the FRONT. This is a DIRECT FIT. NO MODIFICATION to the STOCK COMPONENTS is required..
  • This kit has all you need to lower your front and rear end suspension on your Corvette C5. YOU NEED TO REPLACE THE BUSHINGS TO DO THIS JOB CORRECTLY. This set includes FOUR BRAND NEW POLYURETHANE BUSHINGS. The factory bushings on your C5 are close to 20-years old, DRY-ROTTED and NO LONGER SERVICEABLE. Do not buy any kit that does not include new bushings because you will end up having to source them elsewhere..
  • Compatible with Corvette C5 model vehicles 97 98 99 00 01 02 03 04 1997 1998 1999 2000 2001 2002 2003 2004 (does NOT fit F45, Selective Real-Time Dampening equipped Corvettes)..
Check Stock

MARASTAR 21018 Universal Fit 9x3.50-4 Lawnmower Tire/Wheel Assembly

  • Tire: 9x3. 50-4 tube type Smooth tread - pneumatic 2 Ply rating - check your existing tire Sidewall.
  • Wheel: solid gray steel, 3.5" Centered hub, 3/4" Sintered iron bushings.
  • Universal adapter kit includes: 2 - 5/8" Sintered iron bushings, 2 - 1/4" Nylon Spacers, 4 - steel washers.
  • Use: replacement for front mower tires 9x3. 50-4 (check Sidewall)/ not for highway speeds.
  • Low hassle, low cost solution to repair or replace your mower tires.
Check Stock

MARASTAR 00214 Universal Fit Flat Free 9X 3.50-4 Lawnmower Tire Assembly, Black

  • Tire: 9x3. 50-4 flat free Smooth Tread - check your existing tire Sidewall.
  • Wheel: solid Black Steel, 3.5" CENTERED hub, 3/4" sintered iron bushings.
  • Universal adapter kit includes: 2 - 5/8" sintered iron bushings, 2 - 1/4" nylon Spacers, 4 - Steel washers.
  • Use: replacement for front mower tires 9x3. 50-4 (check Sidewall)/ not for highway speeds.
  • Low hassle solution to repair or replace your mower tires.
Check Stock

Shark 2011 5-Inch by 0.5-Inch by 0.5-Inch Bench Seat Grinding Wheel with Grit-60

  • High performance on a multitude of materials.
  • Made of regular aluminum oxide in a vitrified bond Bench wheel is packed with telescoping bushings to accommodate popular machine spindle sizes.
  • Bench wheel is packed with telescoping bushings to accommodate popular machine spindle sizes.
  • HIGH PERFORMANCE: PFERD Bench grinding wheels offer a high dimensional stability and abrasive performance for working with a large variety of materials and for many different applications.
  • COMPATIBILITY: PFERD high-quality bench grinding wheels have been adapted to the standard bench grinders on market. Telescopic bushings for mounting on almost any bench grinder spindle are integrated.
  • UNIVERSAL TYPE: The UNIVERSAL version of the grinding wheel is ideal for general use in the workshop. Workpiece materials that can be worked are steel, cast steel, stainless steel (INOX) and cast iron.
  • LONG SERVICE LIFE: Dressing the disc on a regular basis exposes sharp grain and maintains an even grinding area. Constantly adjust the workpiece support to the wheel diameter, gap width max. 1/8”.
  • DELIVERY KIT: 1 x PFERD Bench grinding wheel | Vitrified bond | UNIVERSAL type | 6'' dia. | 1/2" thickness | 1'' bore | Flat (type 1) | Alumi....
Check Stock

DEWALT Plunge Base for Compact Router (DNP612)

  • Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking.
  • Precision machined brass bushings and case-hardened steel guide rods provide a smooth and accurate plunge stroke.
  • Clear, LEXAN sub-base provides enhanced base durability, bit visibility, and accepts standard template guide bushings.
  • Rubber overmolded handles and low center of gravity design provide best-in-class comfort, balance, and control.
  • Heavy-duty, precision machined, die-cast aluminum base and motor housing for durability and low tool weight.
Check Stock

XtremeAmazing Door Hinge Pins Kit 1988 2002 2 Door 4Pins Bushing Kit for 88-02 Chevy GMC GM Fullsize Truck SUV

  • Compatible with: Chevrolet , GMC Fullsize Trucks and SUV's (1988 - 2002).
  • You will get: 4 x Stainless Steel door pins.
Check Stock

DCT Brass Router Template Guides Bushing 10-Piece Set & Black Carrying Case - Porter-Cable Guide Bushings 5/16 to 1in

  • PERFECTLY MATCHED MULTIPLES: The DCT Brass Router Template Guides Bushing 8-Piece Set & 2 BONUS Lock Nuts – Porter-Cable Guide Bushings 5/16” to 1” Inch includes a wide range of porter cable style bushing sizes designed to allow full flexibility between router bit cutter and various templates.
  • COMMON SIZES: Standard bushings fit all routers with a 1-3/16-inch or 1-1/4-inch base plate (fits as long as the opening at the base of the router is 1-3/16-inches).
  • Fits 1/4-inch and thinner template material.
  • Each of the 8 guides have the following outside and inside diameters (OD/ID) – 5/16-inch OD 1/4-inch ID.
  • IMPROVED CONSTRUCTION: Constructed from solid brass to resist vibrating loose and resist water and moisture.
  • When inferior steel bushings touch a rotating router bit (i.e. tapered dovetail bit), sparks fly and the router bit will likely be ruined.
  • These solid brass bushings will prevent damage to the bit and the bushings themselves.
  • EASY STORAGE: Heavy-duty 8.5” x 2” x 6.5” (21.6cm x 5.1cm x 16.5cm) plastic blow-molded....
Check Stock

Cardone Service Plus 22-207MB New Rack & Pinion Bushing Kit, 1 Pack

  • Urethane bushings and steel inserts enhance road feel and provides greater durability than typical rubber bushings.
  • 100% new bushing kit ensures long lasting performance.
  • All components included for complete repair and are application specific.
Check Stock

MARASTAR 00232-2pk Universal Fit Flat Free 11x4.00-5 Lawnmower Tire Assembly, 3.4\ Centered Hub, 3/4\ Bushing

  • Tire: 2 pack 11x4. 00-5 flat free Smooth tread - check your existing tire Sidewall for tire and bushing size to ensure proper replacement fit.
  • Wheel: solid Black steel, 3. 4" Centered hub, 3/4" Sintered iron bushings.
  • Universal adapter kit includes: 2 - 5/8" Sintered iron bushings, 2 - 1/2" Nylon Spacers, 2 - 1/4" Nylon Spacers, 2 - steel washers.
  • Use: replacement for front zero-turn mower tires 11x4. 00-5. Not for highway speeds.
  • Low hassle solution to repair or replace your mower tires.
Check Stock

9 PC Standard HSS Keyway Broach Set Cutting Cutter Bushings Shim Harden

  • 5 Collared bushings: A-1/4, 5/16, 3/8, 7/16 & 1/2".
  • The most common keyway combinations for small keyways and bores 3 broaches& 5 bushings=15combination.
  • Wooden box dimension:3-1/4"Lx6-7/8"Wx1-1/8".
Check Stock

NDRUSH Door Hinge Pins Bushings Kit Replacement Compatible with Ford F150 F250 F350 Bronco

  • Compatibility: Replacement for Ford Bronco 1980-1985 and 1996, Ford F-100 1980-1983, Ford F-150 1980-1997, Ford F-250 1980-1997, Ford F-350 1980-1997.
  • Solid Construction: The door hinge pins bushings kit are made of heavy duty steel , not easy broken and corrosion, can be used for a long time.
  • Function: Make your doors go on / off easily and open / shut very smoothly, best replacement for stock corroded hinge pin bushing.
  • Easy Installation: Remove door, pound old rusted hinge pins out with hammer and screwdriver, remove corrosive bushings and install new hinge pin bushing kits.
  • Package Including: 4 x Door Hinge Pins, 8 x Door Bushings, 8 x E-Ring Clips. 90 days manufacturer warranty since order purchase date, feel free to send email if there's any issue before or after purchase, your case will be taken seriously regardless of warranty period.
Check Stock

BBK 2549 BBK Replacement Lower Control Arm Bushing Kit - For BBK Control Arms Only

  • BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
  • Red Polyurethane Bushings for BBK Lower Control Arms Only.
  • Includes All 12 Bushings For 2 Control Arms.
  • You Must Reuse the Steel Sleeves that Came with the Control Arms.
  • Direct Replacement for BBK Rear Lower Control Arms Only.
Check Stock