Categories

Best Steel Castings Steel

YOST Vises 750-DI Multi-Jaw Rotating Combination Bench & Pipe Vise with Swivel Base

  • Extreme-Duty Casting Clamp force: 13,400 lbs. and Torque rating: 316 Ft-Lb.
  • Made from heavy duty 65, 000 PSI Ductile Iron castings, 3x stronger than cast iron vises.
  • Jaw Width: 5" (12.7CM) x Jaw Opening: 5" (12.7CM) x Throat Depth: 4" (10.2CM) x Pipe Capacity: 0.125”D x 3.5"D (0.32CM x 8.9CM).
  • Vise head rotates 360° with respect to the vertical, locking at every 30° or (12) twelve different locking positions and equipped with a large 3.5" x 2.7" (8.9CM X 6.9CM) anvil work surface.
  • 360-degree interlocking (geared) swivel base with (2) lock downs adjusts the direction of the jaws for proper placement.No-pinch main screw handle.
  • Machined Q235 steel main screw 0. 75"D with rolled single acme threads at 4 threads per inch.
  • Replaceable Hardened Steel Serrated (Top) Jaws and EXCLUSIVE SELF-ALIGNING Pipe Jaws.
  • 0.51"D x 9. 5" (1.3CM x 24.1CM) Long handle with rubber bumpers.
  • Base mounting tabs: (4) x 9/16"D (14MM), mounting hardware not included..
Check Stock

JORGENSEN 48-inch Bar Clamps, 90°Cabinet Master Parallel Jaw Bar Clamp Set, 2-pack

  • Heavy-duty steel jaws and high-carbon steel bar for up to 1500 lbs. of clamping force..
  • A reversible head enables spreader clamping and a clamp stand provides easy adjustments, while the maple handles won't wear down your hands..
  • Reinforced steel and castings protected by orange plastic add strength to the jaws..
  • Ideal for a wide range of woodworking such as panel glue-ups, boxes, cabinets, frames and raised panel doors..
Check Stock

JORGENSEN 36-inch Bar Clamps, 90°Cabinet Master Parallel Jaw Bar Clamp Set, 2-pack

  • Heavy-duty steel jaws and high-carbon steel bar for up to 1500 lbs. of clamping force..
  • A reversible head enables spreader clamping and a clamp stand provides easy adjustments, while the maple handles won't wear down your hands..
  • Reinforced steel and castings protected by orange plastic add strength to the jaws..
  • Ideal for a wide range of woodworking such as panel glue-ups, boxes, cabinets, frames and raised panel doors..
Check Stock

Direct Store Parts Kit DG208 Replacement for Vermont Grill VM450,VM450SSP Gas Barbecue Grill Burners,Heat Plates,Cooking Grid

  • Replacement for Vermont Castings Gas Barbecue Grill Model: VM450 , VM450SSP.
  • Original Part Numbers: 50000835, 50003100, 50003133, MJH50000156,....
  • Grill Grid Dimensions: 16 7/16" x 9 1/16".
  • Cooking Grate Material: Porcelain Coated Cast Iron.
  • Direct store Parts Kit includes 4 Stainless Steel burners, 4 Stainless Steel heat plates, and 1 set of 4 Porcelain Cast Iron cooking grids..
Check Stock

AUTOTOOLHOME 2 inch (50mm) Metal Steel Hole Saw Tooth Carbide Tip TCT Drill Bits Kit for Thick Metal Wood

  • TCT drill bit is suitable for hand held electric drill, beach drill,stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
  • The gears is made from YG8 tungsten carbide steel and the rigidity varies from 64HRC to 65HRC..
  • Sharp gears and anti-cutting with lower consumption make the product a long service life..
  • The hole saw has a center twist drill bit inside, Can drill about 3/4 inch depth for the wood, and can drill about 3/16 inch thickness for the steel.
  • Carbide teeth for fast cutting of clean, round holes.Driling with stainless steel plate,high alloy steel,iron,aluminum,castings,plastic,metal,wood,etc..
Check Stock

10 Pcs Ceramic Sandblaster Nozzle,Air Siphon Sand Blasting Gun Sandblasting Parts Ceramic Nozzle（4mm）

  • Non-metallic abrasives such as brown corundum, white corundum, garnet, glass beads can be used. Suitable for abrasives below 1.5mm.
  • Sandblasting and rust removal, surface treatment.
  • Instead of cast iron, alloy steel blast nozzle,saving steel, reduce the cost..
  • Using the performance is good, strong wear resistance, long life, high efficiency..
  • Mainly used for machinery, industrial machinery parts, such as metallurgical casting, surface deoxidation of castings..
Check Stock

Jorgensen 2-Pack Steel Bar Clamp Set, 4-inch Light Duty, 300 Lbs Load Limit, for Woodworking

  • The throat depth is 2 inch, the maximum opening capacity is 4 inch and the normal load limit is 300 lbs.
  • High-carbon steel bar and glass-filled nylon handle make it strong enough. With soft and durable plastic pads, steel bar is plated to be rust resistant and the iron castings have an orange baked enamel finish.
  • Sliding head design makes this style fast acting: the sliding head is threaded to accommodate the screw with large easy grip handle and swivel pad. Multiple-Disc-Clutch design consist hardened plated steel clutch disc and one spring which allows the sliding head to hold securely at any point along the bar.
  • Suitable for a wide range of woodworking & DIY projects, great tools for hobbyist, carpenters, cabinet makers, woodworkers, metalworkers and professional trades people of all types.
  • Comes with 2 pack 4" light duty steel bar clamp in the package.
Check Stock

SÜA - RG-45 - Oxy-Acetylene Carbon Steel Welding Rod (R45) - 36' x 1/16' (2 Lb)

  • SÜA RG45, (RG-45), is a copper-coated, low-carbon steel, oxyfuel gas welding rod used for welding ordinary low carbon steel..
  • RG45 weld deposits are ductile and porosity-free. Commonly used on steel sheets, plates, pipes, castings, and architectural projects.
  • Its typical minimum weld tensile strength is 45 ksi and it conforms to AWS A5.2 R45. RG45 - No flux required.
  • READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
  • Available Diameters: 1/16", 3/32", 1/8" and 5/32" - Available Packages: 1 Lb, 2 Lb, 5 Lb and 10 Lb. Select your choice from the size menu options..
Check Stock

Vermont Castings Porcelain Cast Iron Cooking Grates for Gas BBQs - Exact Fit Barbecue Grill Parts by GrillSpot Set of 4

  • 【Superior Material】- Set of 3 bbq gas grill parts are made of durable stainless steel, non-magnetic and anti-rust, thicker than other bbq grill....
  • 【Fit】- ▶Fits Jenn-Air Gas Grill Models: JA460, JA461, JA461P, JA480, JA580, ▶Fits Vermont Castings Gas Grill Models: CF9030, CF9050, CF9055....
  • 【Fit】▶Fits Vermont Castings Gas Grill Models: VCS4106, VCS500, VCS5000, VCS5000BI, VCS5005, VCS5005BI, VCS5006, VCS5006BI, VCS5010, VCS5016,....
  • 【Functions】- Prevents food directly exposure to flame and distributes heat evenly.
  • Heat your food evenly to get delicious taste.
  • 【Easy Install & Clean】- Simple Steps to install your grill. The surface of grill burner cover replacement are smooth and easy to care, just wash....
Check Stock

Ram-Pro Stainless Steel Wire Brush for Power Drill Impact Brass Driver - Cleaning Brush Hex Shank

  • .../8"-diameter x 2" brush, fine all-stainless steel wires, 1/4" quick-change hex shank fits power drills, impact drivers, die grinders, Length overall 4-3/4".
  • ✓ Quality: The finest quality Brushes to give you long service on the toughest cleaning jobs. These cup brushes are ideally suited for cleaning castings, structural steel and sheet metal. Durable Material: Stainless steel + Brass copper, strong and durable, can clean rust and detail completely, Hang-up hole for convenient storage..
  • ✓ Design: Designed for easy access into narrow holes and confined areas, Designed for use on right angle grinders. welding wire brushes are suitable for cleaning steel parts, machinery, the unfinished metal parts, paint stains, special corrosion without damaging surfaces or fine features.
  • ✓ USES: Innovative spiral knotted wires construction for a narrow face and precision deburring, rust, spatter and paint removal, surface conditioning and preparation. Wire brushes are made of brass, stainless steel, strong and durable, can clean rust and detail completely..
Check Stock

SI FANG 10Pcs 4''x5/8'' Premium High Density Calcined Aluminum Oxide Flap Disc 60 Grit …

  • Premium high density calcined aluminum is characterized by hard-wearing,long life. The type 27 Abrasive grinding wheels are made with a fiberglass backing plate that effectively absorbs vibrations without smear during usage, bringing more stable and efficient grinding..
  • Designed for grinding, blending, sanding and finishing on a wide range of material. Especially suitable for stainless steel also great for mild steel. Flap discs sanding wheel are used to grind rough workpiece surfaces, fast grinding, such as valve castings, angle irons, steel plates, welds, weld scars, rust removal, deburring, etc..
  • Size:100mm x 16mm ,For use on an Angle Grinder.
  • Premium abrasive cloth provides up to 15 X longer life than fiber resin metal sanding discs. SI FANG 80 Grit grinder grinding discs have long-lasting use..
  • Ideal for The Home, Workshop, Hobbyists, Tradesmen, Builders and DIY Enthusiasts, etc..
Check Stock

LDEXIN 38mm/1.5 Inch Carbide Tipped Hole Saw Carbide Hole Cutter Drill Bit for Cutting Metal Plate, Iron, Hard Wood

  • 【Package Content】 1Pcs Stainless Steel Hole Saw in a pack.
  • 【High Quality】 Carbide Tipped Hole Saw Tooth Drill Bits, made of Carbide Metal, give fast and easy cutting. Sharp gears and anti-cutting with lower consumption make the product a long service life.
  • 【Perfect Design】 It has an ejection spring for easy plug ejection, along with a raised shoulder helps prevent break through. The hole saw has a twist drill bit inside, which is undetachable.Specially used on metal and steel plate, give fast and easy cutting.
  • 【Wide Application】 Carbide teeth for fast cutting of clean, round holes,you can easily to drill on the thin stainless steel plate, iron, steel, castings, aluminum alloy and other metal plate drilling.
  • 【Service Guarantee】 LDEXIN guarantee high quality and good service. If you are not satisfied, we offer a 100% money back guarantee. No questions asked. Because we want you to be happy!.
Check Stock

Rannb 38mm/1.5 Inch Hole Saw Carbide Tipped Hole Saw for Cutting Stainless Steel Plate, Iron, Steel

  • ⭐【Material】Our hole saw adopts premium Tungsten Carbide Tipped(TCT) with high hardness and good wear resistance..
  • ⭐【Dimension】Cutting Dia: 38mm/ 1.5".
  • ⭐【Ideal Design】Split tip pilot drill prevents damage by gradually guiding cutter to material..
  • ⭐【Package Content】1 x Hole Saw + 1 x L Wrench + 2 x Pilot Drill Bit.
  • ⭐【Applicable Material】You can easily to drill on the stainless steel plate, iron, steel, castings, aluminum alloy and other metal plate drilling..
Check Stock