OrangeA K11-200 Lathe Chuck 8 Inch 3 Jaw,Self Centering Chuck Hardened Steel Jaws,Internal External Grinding for Lathe Drilling Milling Machine
- Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
- High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
- Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
- Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
- High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check StockOrangeA K11-250 Lathe Chuck 10 Inch 3 Jaw, Self Centering Chuck Milling Hardened Steel, Internal External Grinding for Lathe Drilling Milling Machine
- Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
- High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
- Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.24" / 6 mm - 9.84" / 250 mm, which is suitable for clamping a variety of industrial parts..
- Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
- High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check StockLittleMachineShop.com 0XA Quick Change Tool Post Set for 8x12, 8x14 Lathe (4083)
- 【EXCELLENT QUALITY】:The dedicated pen drilling lathe chuck body is made of high-quality steel. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck..
- 【APPLICABLE WORKPIECE SIZE】:The clamping range of the lathe chuck is approx 8×8 to 23×23mm for square shaped material.Weights 1.43 pounds, and 2.5" diameter..
- 【FREE ACCESSORIES】:We will provide you 2 tightening levers allows you easily to tighten and loosen the jaws..
- 【HIGH PRECISION DESIGN】:This chuck has a special V- slot design inside the jaw,which is more suitable for clamp square material. The jaws are attached to the chuck body through an I-shaped structure which has high precision and firmness..
- 【WIDE APPLICATION】:Applicable to pen-making square material clamping, auxiliary drilling, end milling.With a 1-Inch x 8TPI Thread, which is suitable for most woodworking lathes on the market..
Check StockSimple Woodturning Tools - 1¼' X 8 TPI Vacuum Chuck for Woodturning Lathe Bowl Turning
- American Made and Customer Supported by Harrison Specialties , a family owned CNC machining and manufacturing facility in the land of 10,000 lakes - Minnesota..
- This vacuum chuck gives you a great way to finish the bottom of your bowls and other turned vessels..
- Steel tube length: 18" beyond the end of the chuck. Chuck material: 6061 aircraft aluminum.
- Watch our Simple Vacuum Chuck Demo YouTube Video to see it work!.
Check Stock4PCS 12" Tire Valve Stems Braided Dual Tire Valve Stem Extension Truck RV Trailer Wheel 300mm New Extender Rod
- 12inch (30cm) length: 4pcs 12 inch Valve stem extensions can be applied to various types of vehicles with a single tire width of less than 12 inches, or a dual tire width of less than 12 inches. Small and convenient, easy to carry, suitable for fast inflating the vehicle in any situation..
- U-shaped chuck: High-strength carbon steel U-shaped chuck and screw design. The U-shaped chuck can be fixed on hubs of different sizes. The chuck is tightly locked on the hub by rotating the screw, which prevents the extension stem from falling off the valve core..
- Universal connector: Our connector adopts a 360-degree rotating universal size, which can fit 99% of the valve cores and air pumps of car models. For example: RVs, truck, bicycles, car, Balance car, motorcycles, ATVs, Trailer and more..
- Stainless Steel Woven Mesh: This product uses 304 stainless steel braided flexible hose and arrow-shaped weaving technology. The precise weaving technology protects the inside of the product from damage and improves the service life of the product..
- Package Included:4pcs 12Inch Valve Extension Stem Rod.
Check StockVISLONE 0.8-10mm Right Angle Bend Extension 90 Degree Professional Cordless Drill Attachment Adapter
- 【Strong Material】This chuck drill adapter is made of ABS + Aluminum + Steel, tough and durable, lightweight and easy to carry..
- 【Powerful Function】The drill chuck of the tool adopts standard 0.8mm-10mm drill bit. 1500RPM and 25N·m torque - This right angle adapter drill can withstand a maximum torque of 25N·m and a maximum speed of 1500 rpm..
- 【Easy to Use】 This angle head screwdriver bit is easy to install and use, the screwdriver handle is very stable..
- 【Extension Chuck】90° extension right angle chuck, it can work in hard to reach places, it is a practical accessory..
- 【Universal Application】The 8mm hex shank of the elbow drill chuck is suitable for most standard drills: hand drills, electric drills, polishing equipment, etc..
Check Stock3 Inch 4 Jaw Mini Wood Lathe Chuck Self-centering Lathe Chuck with 1 x 8TPI Thread Lathe Chucks for Woodturning
- ✔PERFEXT QUALITY:The well-designed chuck body is made of high-quality steel.Will greatly extend the service life of the chuck..
- ✔APPLICABLE SIZE:The reversible stepped jaws of this mini lathe chuck for internally or externally holding different shapes workpiece,Internal Jaw Clamping Range:3-44mm.External Jaw Clamping Range: 39-85mm..
- ✔FAST CLAMPING SPEED-This self-centering 3-Jaw chuck does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
- ✔FREE ACCESSORIES:We will provide a set of installation tools. Two hand tight spanners are convenient for strengthening and clamping the workpiece..
- ✔WIDE APPLICATION- The chuck is easy to be used and enjoy a high centering precision.The self-centering scroll type chuck for a variety of parts such as hanging shafts, disks, equilateral triangles, etc..
Check StockVINWOX SCR4-4 Wood Lathe Chuck, 4-Jaw Self-Centering Chuck, with 1\x8TPI thread & 3/4\x16TPI Adapter, 3 Years Warranty
- ✅Products include: Included Chuck body, a set of Tightening Levers, T allen wrench, Screw chuck, adapter converts 1'' x 8TPI to 3/4" x 16TPI and Free Automatic Spring Loaded Center Punch, MAKE SURE check your wood lathe FIT first..
- ✅Internal jaws tighten around workpieces varying from 1-1/2" to 3" (or 3" Square Block). External jaws spread inside of workpieces with pilot holes ranging from 2" to 3-5/8" Included screw chuck provides even more options for supporting your projects.
- ✅4" sturdy steel body with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground and hardened for long and stable service life. All guideways and bearing surfaces are precisely machined.
- ✅Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects. Widely used for machine tools and accessories for general lathes and industrial machines.
- ✅Stable Service and Long Life: VINWOX Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life.
Check StockYXCS 4 Pieces Thumb Handle Chuck Keys,Drill Chuck Key Wrench Keyed Chucks Pilot Spanner Chuck Key, Press Clamping Key(Chuck Diameter: 3/8inch, 1/2inch, 5/8inch,5/16inch)
- 【4 Pieces Thumb Handle Chuck Keys】- 3/8" (10mm), 1/2" (13mm), 5/8" (16mm),5/16"(20mm),each one in different size.4 sizes to meet all your needs.
- 【Quality Materials】- Thumb handle chuck keys are made of carbon steel, limits the possibility of dangerous fracture under excessive load, also makes it very durable, comfortable to hold, without bur or chip.
- 【Practical Tool】- Thumb handle chuck key is applied to control the tightness of the electric drill clamping tool, tighten and loosen the chuck.
- The chuck needs a key to provide the necessary torque to tighten and loosen the claw.
- Please note that the package contains the key but does not contain the chuck.
- 【Wide Application】 Thumb handle chuck key is suitable for most electric drill clamping tools and heavy-duty chucks.
- The drill key replacement can be compatible with most power tool brands and meet your needs of replacement for lost or broken chuck keys.
- 【100% Risk-Free Warranty】- If the product is missing accessories or the product does not meet your usage needs.Please contact us by e-mail. Our worry-free 180 Days(Free Reissues and Money Back Guarantee).And you don't need return the item.Save Your Time..
Check StockHromee 8 Pieces Air Chuck Set with Dual Head Tire Chuck, Closed Ball Air Chuck and 1/4 Inch Male Air Plug, Heavy Duty Air Compressor Tire Inflation Tool
- PACKAGE INCLUDES - The kit includes 2PCS dual head air chuck, 2PCS ball air chuck, 2PCS male air fittings and 2PCS thread tape..
- DUAL HEAD CHUCK - with 1/4 inch FNPT air inlet, dual head chuck makes tire valves more accessible with the two heads for easier access. To use inner head when the valve is facing inward, which is great for reaching into dually trucks and other challenging angles..
- CLOSED BALL CHUCK - Ball air chuck is ideal for tire inflation of various tires, including car, truck, SUV and bicycle tires. This air chuck features a built-in shut-off valve seals air when not in use and 1/4 in. NPT female threads..
- EASY TO USE - All the chucks are female NPT so we equip 2 pieces male air plugs for easy connection. And 2 rolls of thread tape are for better seal..
- HEAVY DUTY&STURDY - They are all made from steel and copper plated which features good corrosion resistance and wear resistance, you can use them for long time. Perfect for tire inflating and measuring the pressure..
Check StockVEVOR 2.75-Inch Wood Lathe Chuck, 4-Jaw Precision Self-Centering Keyed Lathe Chuck Set, 1-Inch x 8TPI Thread Mini Lathe Chuck, Woodturning Chuck Jaws, Wood Lathe Accessories for Bowls Vases
- Applicable Workpiece Size: The wood turning chuck is ideal for mini and lathes. Inner jaws tighten around workpieces varying from 0.9" to 1.9". Outer jaws spread inside of workpieces with pilot holes ranging from 1.4" to 2.5". Comes with a set of accessories, including 1 x chuck key, 1 x Screw Chuck Stud, and 1 x wrench to facilitate your work..
- High-performance Chuck: Each jaw can be adjusted to the center with superior gripping force. Self-centering improves the flexibility. Clamping most shaped workpieces can also be performed..
- Simple Operation: This complete lathe chuck set includes a precision jaw and a set of installation tools, which bring much convenience to your operation. The chuck has 1" x 8 TPI Thread and 3/4" x 16 TPI Adapter (Mounted on the Chuck).
- Compact and Stable: Our mini wood lathe chuck is well-designed and made of high-quality steel. Both sides of jaw teeth and chutes are ground to be sturdy. It is coated with antirust oil to prolong the service life..
- Versatile Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check StockQLNE 5 Sizes Drill Chuck Key Wrench, Replacement Drill Press Chuck Key, Electric Drill Clamping Tool (Chuck Diameter: 3/4\ / 5/8\ / 1/2\ / 3/8\ / 1/4\)…
- Material: The Drill Chuck Key Wrench is made of solid carbon steel and coated with durable plastic, which is anti-rust, anti-slip design, reducing stress damage within a certain limit..
- Chuck Diameter: 3/4" (20mm), 5/8" (16mm), 1/2" (13mm), 3/8" (10mm), 1/4" (6mm)..
- Function: The Replacement Drill Press Chuck Key is a kind of electric drill clamping tool, perfect to tighten or loosen a chuck, which allows a quick change of your drill bit heads..
- Application: The Key Wrench is suitable for all heavy-duty chucks, and can be compatible with most of power tool brands..
- Package Included: 5PCS Drill Chuck Key Wrench in total..
Check StockOrangeA Collet Set CAT40 ER32 CAT40 ER16 Spring Steel Collet Chuck Tooling Package for Milling Machine
- Spring Steel Design: High grade spring steel frame ensures better overall balance of tool holder assembly. Durable and long lasting. Polished body to be smooth and rust resistance. 6pcs CAT40 End Mill Holders Size: 1/4", 3/8",1/2", 5/8", 3/4", 1".
- Both ER32 and ER16 Chuck Gage or projection length is 2.75".
- 1pcs Precision Keyless Drill Chuck 1/2 Capacity..
- Great Accuracy & Speed: CAT40 collet chuck accuracy in Tenth. Collet Set: T.I.R.: 0.0003" or 5 um. Hardened and ground to ensure maximum accuracy. High concentricity. 6pcs CAT40 End Mill Holder in Projection Length: 2.5".
- ER32 and ER16 Chuck Gage or projection length is 2.75". Collet Chuck of high speed is balanced to meet all industrial standard. Stable performance..
- Multiple Collet Sizes: 12pcs ER32 collets set by 16th: 1/8".
- 10pcs ER16 collets set: 1/32", 1/16", 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8". Special angled slots increase rigidity. Better overall balance of tool holder assembly. Use with any standard ER collet chucks for coolant-thru tool applications..
- Effortless To Operate: Precision collet chucks are designed to be easy to use. V-groove or/and Fully ground flange say it is easy on tool changers for le....
Check Stock