TonGass DIY Crosscut Sled Kit for Table Saw - 2*UHMW Runner Bars 2* Aluminum Tracks 1* Knob & Bolt Set 8* Flat Heat Screws
- Safety is our priority - This DIY table saw crosscut sled hardware kit will make crosscutting safer and more convenient. Avoid risking your limb when....
- 13 PIECES CROSSCUT SLED HARDWARE - includes 2 pieces of 19” x 3/4” x 3/8” UHMW runner bars, 2 pieces of 12 inches aluminum mini tracks, 1 set....
- PRE-CUT AND COMPLETE SET FOR YOUR CONVENIENCE - All the components of this kit are cut and designed specifically for the building of a crosscut sled.....
- Please take note: The UHMW runners included in this kit will only fit standard 3/4-inch and 3/8-inch track slots and will not fit the Ryobi table saw....
- FREE HOW TO BUILD A CROSSCUT SLED GUIDE BOOKLET - Follow to a tee or use as a guide, our easy-to-understand guide is perfect for all skill levels.....
Check StockVelodi 2 PCS 6302-2RS Replacement Ball Bearing for DeWalt DW708 DW716 DW717 DW718 DWS780 Miter Saw# N127530
- Compatible with: DeWALT: DW706 Type 1 12 Dual Bevel Miter Saw, DW708 Type 1 Crosscut Miter Saw, DW708 Type 3 Crosscut Miter Saw, DW708 Type 4 Crosscut....
- Pre-Lubricated and Stable Performance and Cost Effective, Deep Groove Ball Bearings..
- Double Seal Effectively Saves Grease and Prevent Impurities From Entering..
Check Stock
Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4″ x 3/8″).
- Kit contains: Our crosscut sled kits come in red- 3/4″x3/8″x36″ 2 pcs.
- white- 3/4″x3/8″x19″ plus 1 foot primary color T-track, 2 pcs.
- white- 3/4″x3/8″x48″ 2 pcs. Make your crosscut sled any size for your table saw and cutting requirements..
- High Quality Material: UHMW is a linear polyethylene with a molecular weight of 3,000,000 to 6,000,000. Thus, it is ten times heavier than regular high density polyethylene, and extremely durable for extensive use..
- Smooth & No Residue: UHMW bars produce less friction than wood, perfect for runners for crosscut sleds. Furthermore, UHMW doesn’t expand or contract like wood during extreme weather changes. Each bar measures 3/4″ x 3/8″, fitting most standard table saw slots. Unlike wooden bars, UHMW bars are slick, leaving no residue, dust, or shavings behind..
- Outstanding Impact Strength: With outstanding impact strength even at low temperatures, our crosscut sled kits are ideal for jigs, fixtures, or 3/4″ x 3/8″ miter grooves on table saws, bandsaws, or router tables..
- Please note: UHMW poles tend to bend during shipping but are easily adjusted..
Check StockIRWIN Hanson 6536 Die 3/8\-24 NF 1\ Hex, for Tap Die Extraction
- Will not crosscut or undercut the thread the way a cutting die will.
- Made in the USA from high-carbon alloy steel..
Check StockGerber Compact Clearpath Machete [31-003154]
- Corrosion-resistant stainless steel blade.
Check StockKMIAN TOOLS 5/8\-24 TPI UNEF Right Hand Round Die, Machine Thread Die
- Will not crosscut or undercut the thread the way a cutting die will.
- Made in the USA from high-carbon alloy steel..
Check StockINCRA Build-It T-Slot Panel Connector 18-inch
- The Incra Build-It Modular Jig &Fixture System is a highly versatile collection of jig and fixture "building blocks".
- Simply connect the parts with a screwdriver and the included fasteners to produce in minutes what used to take hours or even days.
- From tenoning jigs and crosscut sleds for your table saw to coping sleds for your router table.
- You can build the perfect jig in minutes with INCRA’s new Build-It System.
- Shooter boards, crosscut boxes, tenoning or tapering jigs and everything in between, the possibilities are endless.
Check Stock
DIY Crosscut Table Saw Sled Kit with Specific Guide Booklet to build your own crosscut sled for More Accurate and Safer in Saw Working, pack of 1
- （Attention: The UHMW bars are not in 3/4″ by 3/8″ size）DIY your own crosscut sled – You may build your own unique sled to fit your table saw.
- Make your desired crosscut sled size and meet your unique cutting requirements..
- Accurate & Safe – Great improve cutting accuracy and make saw operations safer, and steady the work piece while shielding your finger from harm..
- Quality Kit – UHMW bar is the most often used material in crosscut sled runners and it does not flex under sudden temperature changes and slides more smoothly as there is less friction.
- The aluminum T track is solid extruded and can be trimmed to match your sled. (ATTENTION: The bars Do Not fit RYOBI table saw track slots).
- Fun of DIY – Not only can you create your own unique table saw sled but also you can enjoy the processing of DIY, more motivated and confident in the following saw working..
- Package Included – 2 UHMW bars, 2 T tracks, 1 star knob and bolt, wood secrets of varying lengths, and 1 specific guide booklet (glue and other building materials are not included).
- Backs its products within 90 days warranty.
- Please feel free to contact us with any questions you may have..
Check StockTEKTON 7 Inch Long Nose Pliers | PGF10007
- Extra long, slender nose reaches deep into tight spaces and grasps small parts.
- Thin, sleek build makes these pliers light and exceptionally maneuverable.
- Crosscut teeth distribute force evenly for sure grip in any direction.
- Side cutter with induction-hardened blades (HRC 58-64) cleanly snips copper, aluminum, and other soft metal wire.
- Slim, nonslip grips provide comfort and control without adding bulk.
- Total Length: 7.5 in., Width: 2 in., Height: 0.6 in., Head Length: 3 in., Handle Length: 4.5 in., Grip Length: 3.5 in., Cutting Capacity for Low Carbon Steel Wire: 8 AWG.
Check Stock
DIY Crosscut Table Saw Sled Kit with a Specific Guide Booklet to Build Your Own Tablesaw for More Accurate and Safer Saw Working, Table Saw Accessories, Pack of 1
- ... table saw sled for your need, but also lies in the sense of accomplishment and creativity it brings, being more motivated and confident in the following saw working when you use it..
- Vary Size – You may build your own unique sled to fit your table saw.
- Make your desired crosscut sled size and meet your unique cutting requirements..
- Table Saw Accessories - 3/4'' x 3/8'' UHMW bar is the often used material in crosscut sled runners which fits most table saw and will not expand under sudden temperature changes as well as slick enough to slide smoothly.
- The aluminum t track is solid extruded and can be trimmed to match your sled.
- (ATTENTION: The bars DO NOT fit RYOBI table saw track slots).
- Package Included – Crosscut table saw sled accessories (2 UHMW bars (3/4'' by 3/8'' ), 2 T tracks, 1 star knob and bolt, wood screws of varying lengths) and 1 specific guide booklet (glue and other building materials are not included).
- Backs its products within 90 days warranty.
- Please feel free to contact us with any questions you may have..
Check Stock
Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4" x 3/8").
- Kit Contains: Our crosscut sled kits come in Red-3/4"x3/8"x36" 2pcs. white-3/4"x3/8"x19"+1feet T-track primary color, 2pcs. white-3/4"x3/8"x24"2pcs. white-3/4"x3/8"x36"2pcs. white-3/4"x3/8"x48" 2pcs. Make your crosscut sled to the size you want or need for your table saw and cutting requirements..
- High Quality Material: UHMW Polymer (plastic) is a linear polyethylene material with a molecular weight ranging from 3,000,000 to 6,000,000. Furthermore, because UHMW is ten times heavier than regular high density polyethylene, it is extremely durable for constant repetitive use..
- Smooth&No Residue: Because UHMW bars produce less friction than wood, they are commonly used as runners for crosscut sleds. Another benefit is that UHMW does not expand or contract like wood during extreme weather changes. Each bar measures about 3/4" x 3/8" and fits most standard table saw slots. UHMW bars are also slick and will not leave any residue, dust, or shavings behind, as do wooden bars..
- Outstanding Impact Strength: Even at low temperatures, jigs, fix....
Check StockBOSCH CM8S 8-1/2 Inch Single Bevel Sliding Compound Miter Saw Blue
- CONVENIENT: The Bosch CM8S features a bevel lock lever and bevel turret stops located on the side of tool for quick and easy adjustments without....
- SUPPORTIVE: The miter saw provides an integrated expanding base extensions that expands up to 29-Inches left to right for additional work-piece....
- CONVENIENT: Features a miter detent override, an intuitive, easy to access thumb-actuated override as well as a clear lower guard for an unobstructed....
- PORTABLE: The Bosch CM8S miter saw CM8S has the same crosscut capacity of 12-1 4 in. as a 10 inch miter saw but is 30% lighter. The Bosch exclusive....
Check Stock
Weaver Curved Saw Scabbard 27 With Snap Hook, Black
- JAPANESE AZEBIKI SAW: Azebiki Saw is used to cut holes, mortises, grooves in mid-panel, and sliding dovetails. These saws are also useful for working in restricted areas without damaging adjacent work—Japanese essential carpentry tools..
- UNIQUE ROUNDED BLADE: The curved blade allows you to start cutting while cutting into a flat surface. The moderately short blade is a real virtue. You can get it into corners that were impossible to reach with any previous saw..
- RYOBA DOUBLE-EDGED: Double-edged pull saw for both rip cut and crosscut. You can enjoy silky smooth cutting regardless of the wood grain. All KAKURI saws are manufactured in Japan and handcrafted by Japanese craftsmen..
- RAZOR SHARP JAPANESE STEEL BLADE: The blade is made of Japanese steel and you can enjoy the effortless cutting. Japanese saws are used with a pulling force, and their sharpness results in a clean-cut..
- PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon steel / Handle: Japanese wingnut, Cane / Blade Length: 3.5" / Blade Thickness: 0.015-0.031" / Kerf Width: (Rip-cut) 0.031", (Cross-cut) 0.039" / TPI: (Rip-cut): 7.3, (Cross-cut): 15.3 / Overall Size: 15.8" 2.5"×0.7" / Weight: 2.5 oz.
Check Stock
