DRILLFORCE HSS General Purpose Heavy Duty Cobalt Jobber Length Twist Drill Bits Size 1/16 with 10pcs in Plastic Bag, ideal for drilling on mild steel, copper, Aluminum, Zinc alloy etc.
- 10pcs HSS Cobalt Jobber Length Twist Drill bit in Plastic bag with Lables with Size 1/16".
- High Quality Material- High Speed Steel Cobalt -M 35 Cobalt Steel Best Material..
- High Efficiency In Drilling Metals, and Stainless Steel..
- Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel.
- 135-degree split-point tip starts drilling immediately with less force and eliminates "walking" across the work surface.
Check StockIRWIN 1890709 Straight Shank Installer Drill Bit for Wood, 18-Inch by 3/8-Inch `
- 82˚ point for fast, smooth drilling in wood.
- Hole in flute for easy wire pulling through walls, ceilings and floors.
- 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling Hole not included on 12" length bits.
- Premium high carbon steel construction for extended drilling life in wood.
Check Stock
Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry
- ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
- ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
- ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
- ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
- ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock
AMOOLO Cobalt Drill Bit Set 31Pcs (1/16"-1/2"), M35 High Speed Steel Metal Drill Bits Jobber Length for Hardened Metal, Stainless Steel, Cast Iron, Plastic and Wood
- ...gh Speed Steel】Industry grade M35 high speed steel drill bit set, much harder than HSS used in other similar drill bits set. These drill bits contain 5% Cobalt, which increases wear-resistance and durability..
- 【Most Commonly-Used 20 Sizes】A complete combo set of 31 jobber length industrial drill bits for metal drilling (1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64",7/32",15/64",1/4", 17/64", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2") . They fit the majority of power drill currently on the market and comes with a portable plastic case for easy storage and organization..
- 【Precise & Efficient Drilling Performance】✔ Fully Ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. ✔ 135° Split Point with round straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
- 【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. ✔ Pay attention to speed, pressure and heat control during drilling..
- 【90 Days Warranty】At Amoolo, we center on customer satisfaction. Get your dril....
Check Stock
HSS Hole Saw Kits for Metal, Rocaris 23 pcs High-Speed Steel Hole Saw Cutting Kit Drill Bits Opener Cutter Tool for Stainless Steel,Copper, Iron 16~100mm
- 【Innovative three-blade design】Designed as Three-blade for layered cutting, the Hole Saw Kit for Metal can make the cutting resistance smaller and chip evacuation smoother.It can extend the service life..
- 【Top Quality】Made of High Speed Steel, the Titanium-plated cemented carbide Tooth are sharp, anti-rust and durable.Ideal for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
- 【Fast Cutting】The teeth of metal hole saw kit are designed as front and rear low top tooth profile and Three-blade, which make it more efficient than flat tooth drilling..
- 【Multipurpose Tools】The carbide hole saw set are widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP, and plastic to drilling holes. Not recommended for tile, glass, concrete, stone..
Check StockTwist Drill Bits, 10pcs M35 HSS-CO Cobalt Drill Bit Set 1mm-5mm, for Drilling on Stainless Steel, Cast iron, Sheet Metal, Steel Plate, Angle Iron(1.5mm)
- It is widely used in the drilling of stainless steel plate, automobile spring steel and die steel.
- Ideal for drilling on stainless steel, cast iron, sheet metal, steel plate, Angle iron.
- With high surface finish, high grinding precision , the blade is sharp and durable in use.
- Made of M35 material, includes 5% cobalt, high hardness, stable performance.
- 135-degree split-point tip starts drilling immediately with less force and eliminates.
Check Stock
3 in 1 Pocket Hole Jig Kit with Wood Dowel Punch Locator, Woodworking Doweling Jig Set with 8 10 15mm Drill Bit, Adjustable Woodworking Drilling Locator Puncher Tools
- Unique Design: The tool is designed with 2 brass, which makes the positioning of the woodworking more precise, the drilling guide positioning jig fits you perfectly, can further improve the accuracy, mark and align the jig to get the desired result.
- Precise Positioning: 8/10 mm punching range. When drilling, you can adjust the precise alignment of the metal bushing, adjust the drilling height and drilling depth according to your needs, and equipped with locator, improve the accuracy of drilling.
- High-Quality Material: The 3 in 1 adjustable woodworking drilling locator puncher tool is precision-machined from high-quality aluminum alloy, which is stable and corrosion-resistant. Anodized finish and hardened steel center block construction is durable, large steel clamp screws tighten tools like a vice, and a sturdy aluminum surface holds your product securely for extended use.
- Complete Set: 3-in-1 drill guide punch locator tool is equipped with 8mm and 10mm drill bits, and 1 x 15mm hole saw to meet your needs for different hole diameters. Built-in self-tightening clamps allow you to hold wood for drilling.
Check StockDtacke 3pc High carbon steel Non Slip Automatic Center Punch Set DIY Marking Tool Metal Wood Scribe Marking Tool
- 3pc Steel Centre Punch Set Point Metal Wood Scribe Marking Tool Ribbed Non Slip.
- Marking, punching, staking, and starting screws and drill holes.
- Use of advances played a small dot on the workpiece, as a marker (such as central or circumferential line when drilling), or other point of the center....
- Suitable for proofing hole before steel, aluminum, copper and other materials drilling of drill positioning, to avoid direct drill drilling position....
Check Stock
Happybuy Diamond Core Drill, 2180W 7\/180 mm, 1600RPM Variable Speed Core Drill Rig with Portable Case, Handheld Drilling Machine for Hard Stone, Concrete, Marble, Granite, Brick
- 7 inch Max Drilling Diameter: 2180W powerful motor of the handheld core drill rig is designed for wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors, and more. With a 7"/180mm max drilling diameter and 1600RPM stepless speed, you can drill with less effort..
- Durable Steel Output Shaft & Copper Inlet: As the machine will work upside down, water will unavoidably flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
- Over-current Protection: We also provide an overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
- Comfortable Shoulder Rest & Handle: The upgraded shoulder rest is designed to save your energy. The slip-proof rubber handle greatly enhances friction and reduces vibration to completely control the hammer with comfort. Besides, tools are well stored and sorted in a compact case..
- Wide Range of Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair ra....
Check Stock
BAOSHISHAN Pearl Drilling Machine Bead Driller Amber Holding Machine Full Set Speed Adjustable Upgrade Large Plastic Pallets 110V (280W Black)
- SAVE TIME FROM HAND DRILLING - Our pearl drilling machine can make a accurate holing on precious stone as pearl, coral, amber and ornaments components such as gold, silver and copper from 0.2''-1.37''. Only takes 30s to punch a pearl, save you a great deal of time from hand drilling..
- VARIOUS ACCESSORIES SATISFT DIFFERENT NEEDS - This pearl drill is equipped with 20 pairs of special collets, which is suitable to the pearls in round shape, "ж" shape, square shape and other special shapes. It also comes with tungsten-steel drilling needle(the size of needle is delivered randomly)..
- TWO SIMPLE OPERATION - You can plug directly into the 110V and turn the switch to 1/2 or 3/4 position to adjust the speed and start the continuous work. Or connect the foot switch to control the pearl drilling machine for an an intermittent work, allowing you to focus on the drlling and create perfect crafts..
- MANUAL SYMMETRICAL DRILLING - Bead reverse knob can flip the pearl to keep the drilling symmetrical. You just need to drill half way through and then flip the pearl to drill the other half of the way through. Also, the knob is a magnetic design that doesn't require much effort at all..
- ATTENTION&WARRANTY - Before your operations, you MUST tighten everything! Including you....
Check StockArcher PRO 4\ in. Diamond Turbo Core Drill Bits for Concrete Drilling
- ✔Size --1pc 1 3/8 inch core drill bit (35mm) ,diamond height 10mm, total length 100mm,diamond grit #25/35,working length 80mm,5/8-11 thread of the granite drill bit.
- ✔Wide Application --Diamond drill bit are worked great for dry drilling holes through Granite Marble Hard Stone Reinforced Concrete Brick Block Counter Top,Using water could prolong the lifetime.
- ✔Super Quality Raw Material --Using laser welded technology,improve the performance of segments,avoid segments off during drilling process.The vacuum brazing protective layer on the surface of the core steel offers clean cut & steel core protection.
- ✔Fast and Smooth Drilling --Creates a fast and stable drilling, you could drill smoothly with no broken edges.
- ✔Machine --angle grinder (Pay Attention! If you drill through thick granite ,we recommend you to add enough water to help cooling the bits,which could prolong the lifetime).
Check StockZouzmin SPMG050204 10pcs + 15-2D-C25-SP05 SP Series 2D Shank Dia 25mm indexable Drill bit CNC Lathe Tools for Fast U Drill Machinery Drilling Tool.
- Feature:Recommened to general drilling and cross hole drilling,suitable to lrregular surface drilling and interrupted drilling.
- Size:Drill diameter:0.59”=15mm Shank diameter:0.98”=25mm Max drill hole depth:1.18”=30mm.
- Insert coated:PVD,it is the general select to steel,stainless steel and heat-resistant alloy..
- Package:1pc U drill with wrench+10pcs insert.
Check Stock
Drill Jig for Angled Holes-Portable Aluminum Drill Guide for Straight Holes 30 45 90 Degrees with 4 Sizes Guide Holes Durable Drilling Jig for Cable Railing Deck Stair Handrail
- Multiple Sizes: The drill jig for straight holes has four sizes for each drilling angle, which are 3/8”(9.52mm), 5/16”(7.93mm), 1/4”(6.35) mm), 3/ 16"(4.76mm), compatible with most cable railing lag screws. You can fix the steel sleeves by tightening the set screws to prevent the steel sleeves from falling off during drilling..
- Accurate Three Angles: The drill jig for angled holes allows you to drill 30°, 45°, and 90° angle holes for wooden stair railings and deck posts. The angles are fixed with no deviations, and you can quickly drill accurate 30°/45°/90° angle holes with an impact drill in the posts and railings, saving you time and effort and getting the work done quickly..
- Hard Metal Material: The drill guide for straight holes is set with ultra-hard chrome-plated steel sleeves, which are wear-resistant, sturdy, and durable, no need to worry about being worn when drilling. The main body of the railing drill guide is made of high-quality industrial grade aluminum alloy, hard and durable, with CNC anodized surface, wear-resistant and corrosion-resistant, and clear markings..
- Scope of Application: This drill guide for angle drilling can be used with locking C clamps and F clamps to prevent the drill jig from wobbling while drilling, and al....
Check Stock
