Categories

Best Steel Pilot Tipped Drill Bits

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

8 Pack Woodworking Countersink Drill Bits Set 3in1 Heavy Duty M2 Pilot Drill Bits Depth Adjustable 82-Degree Chamfer 1/4” Hex Shank for #4#6#8#10#12#14 Screws in Soft & Hard Wood

  • 3in1 Countersink Drill Bit Set – Enable you to Drill, Countersink and Counterbore in one step, ideal woodworking tools for setting screws flush with....
  • Meet All Your Needs–8 pcs Countersink drill bits assortment in size 5/64”, 3/32”, 7/64”, 1/8” (x2), 9/64” (x2), 5/32” for perfect....
  • Easy To Use–3 sharp edged 82-degree chamfer design Counter sink bits built with 1/4" Hex Shanks with groove for quick size changes without bit....
  • Drilling Depth Adjustable–Extra Pilot bits included.
  • Working length of the pilot drill bit is adjustable for precise depth control.
  • Compatible with More Materials – Pilot bits are made of high quality M2 steel, countersink bits make of high carbon steel, able to drill in hard....
Check Stock

TCT Hole Saw Set 3pcs JESTUOUS 3/8 Inch Shank Diameter 7/8 1-1/8 1-3/8 Cutting Dia Carbide Tipped Tooth Round Drill Bit Hole Kit Cutter for Stainless Steel Metal Wood

  • Carbide tipped hole saws are suitable for electric drills and platform drills..
  • High quality tungsten carbide materail teeth,reduce the damage of tips,increase the endurance,provide a longer service life..
  • Driling with stainless steel plate,high alloy steel,iron,aluminum,castings,plastic,metal,wood,FRP,etc..
  • Designed with precision ground,sharp tough gears and stepped pilot drill bit to drilling more precise,smooth,faster and safer,leave perfect cutting results..
  • Package: 3 hole saws(cutting diameter:22mm/29mm/35mm)+extra 2 pilot drill bits+extra 1 ejector spring with plastic case..
Check Stock

ACTOOL 1-1/4\ Diameter × 2\ Depth of Cut HSS ANNULAR Cutter with 3/4'' Weldon Shank

  • CARBIDE TIPPED CUTTER- Premium carbide is brazed for superior strength, durability and wear resistance. 1-15/16’’ Diameter x 2’’ Depth of Cut annular cutter include free Pilot Pin..
  • EFFICIENT & PRECISE- Cut holes in steel quickly, precisely and safely. It can cut holes in steel up to 10X faster than standard twist drill bits..
  • EXCELLETN DESIGN- Triple-Cut geometry provide efficient cutting, fast feed rate, less vibration, smooth hole surface and long tool life..
  • WIDELY USE- For smooth and easy cutting almost all types of steel, including materials that are extremely difficult to cut such as stainless steel, titanium, hardened steel and rail steel..
  • UNIVERSAL FIT- 3/4" Weldon shank with 2 flats - fits most major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • ...untersink drill bits with countersinks for wood.
  • STORAGE CONTAINERS are available on this page at section "Make it a bundle". Counter sinker drill bit set designed in Bloomfield, New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report confirms that drill bits set Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits.
Check Stock

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits desi....
Check Stock

Greenworks 90 Piece Impact Rated Driving Set

  • SET INCLUDES: (21) 135° Split Point Black Oxide Drill Bits，(4) hex shank spade bits，(8) Hex Shank Nut Setters，(1)Magnetic Bit Holder, (27) 1 in. Insert Bits，(4) Drill Stops, (1) Countersink, (1) Center Punch, (1)Hex Key, (6) 2 in. Power Bits, (5) Carbide-tipped Masonry Drill Bits, (5) Black and Silver Brad Point Drill Bits, (4) Hole Saws, (1) Hole Saw Mandrel, (1) Carrying Case..
  • VERSATILE: Suitable for drilling wood, metal, plastic, and masonry..
  • CONVENIENT STORAGE: The plastic carrying case comes with a locking system and labeled compartments to keep your bits organized..
  • MAGNETIC BIT HOLDER: Magnetic bit holder holds drill bits for driving fasteners..
  • BLACK OXIDE FINISH: Provide superior durability and up to 50% improved lifetime compared to standard high-speed steel drill bits. They also reduce friction, giving you improved hole boring speeds..
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....
Check Stock

Yakamoz 5Pcs Taper Drill Countersink Set 1/4 Hex Shank Countersinks with Tapered Point Pilot Drill Bits for Woodworking

  • Quick change 1/4" hex shank for power drill, 7/64", 9/64", 11/64", 3/16", 7/32" HSS taper drill bits ideal for installing screws..
  • Use these countersinks to drill the pilot hole and countersink hole in one step..
  • 4-Flute cutter countersink and tapered drill bit provide superior speed and ideal finish..
  • Adjustable countersink along taper drill to get proper pilot hole depth for different length screws..
  • Made of High Speed Steel (HSS) drill bits with alloy steel countersinks, good cutting performance on hardwoods and composites and long life use..
Check Stock

FTG USA Wood Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4#6#8#10#12 Countersink Bit for Woodworking, Tapered Drill Bits Secured with Pin to Hex Shank, 2 Stop Collar, 1 Allen Wrench

  • ...untersink drill bits with countersinks for wood.
  • STORAGE CONTAINERS are available on this page at section "Make it a bundle". Counter sinker drill bit set designed in Bloomfield, New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report confirms that drill bits set Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits.
Check Stock

FTG USA Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4 6 8 10 12 Tapered Drill Bits Secured with Pin to 1/4 Hex Shank 1 Allen Wrench Counter Sinker Drill Bit Set for Woodworking

  • ...untersink drill bits with countersinks for wood.
  • STORAGE CONTAINERS are available on this page at section "Make it a bundle". Counter sinker drill bit set designed in Bloomfield, New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report confirms that drill bits set Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits.
Check Stock

WICHEMI 10PCS TCT Hole Saw Kit Tungsten Carbide Tipped Hole Cutter Set Heavy Duty Hole Saw Hole Cutting Drill Bit for Stainless Steel Copper Iron Aluminum Iron Metal Plate 5/8\ to 2-1/8\ inch

  • ...), 25mm(1”), 28mm(1-3/32”), 35mm(1-3/8”), 38mm(1-1/2”), 45mm(1-3/4”), 50mm(2”), 53mm(2-1/8”). The package contains 10pcs pilot drill bits and 2pcs L-shaped hexagon wrench. A variety of sizes to meet your different needs..
  • 【Premium Material】- This hole saw is made from high quality tungsten carbide tipped cutters, ensures its high hardness, rust proof and wear resistance. Designed with precision ground, sharp tough gears and stepped pilot drill bit to drilling more precise, smooth, faster and safer, leave perfect cutting results..
  • 【Fast Cutting Speed】- The spring-type guide drill can eject the chips to make the cutter body cut clean and smooth, which not only saves cleaning time, but also shortens the cutting time. The speed of burr-free holes is faster than that of traditional twist drills or other hole saws, and has a greater advantage in cutting time..
  • 【Multipurpose Tools】TCT Drill Bit sets cut quick, precise holes in 28MM thickness metal material, they are industrial grade metal drilling hole cutter for stainless steel, mild steel, alloy steel, iron,copper, aluminum, castings, plastic and brass..
  • 【Wide Application】: TCT Carbide Steel teeth for fast cutting of clean and smooth round holes. The carbide hole saws set are sui....
Check Stock