Categories

Best Steel Precision Alignment Shims

Allstar Performance ALL60208 Upper Control Arm Shim

  • Control arm shim is an upper type that is . 750 inch thick and a dual mount design for use with 6 inch bolt spacing.
  • One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
  • Shims allow easy adjustment of caster/camber during front end alignment.
Check Stock

Valve Spring Shim - 1.500\ OD.645\ ID .060\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Guaranteed Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1.500" Outside Diameter, 0.645" Inside Diameter. Includes 1 0.060" Thick Shim..
  • Recommended for use with our 916, 26056, 917, 928, 929, 924, 925, 911, 954, 936, 938, 930, 953, 999, 26094, 943, 26055, 939, 927, 919, 933, 935, 944, 26095, 26097, 932, 26089,955, 26115, 26099 and 26547 springs..
  • Available in an assortment pack under part number 4757..
Check Stock

Allstar Performance ALL60205-10 Upper Control Arm Shim, (Pack of 10)

  • One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
  • Shims allow easy adjustment of caster/camber during front end alignment.
  • Control arm shim is an upper type that is . 250 inch thick and a dual mount design for use with 6 inch bolt spacing.
Check Stock

Allstar Performance ALL60204-10 Upper Control Arm Shim, (Pack of 10)

  • One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
  • Shims allow easy adjustment of caster/camber during front end alignment.
  • Control arm shim is an upper type that is . 185 inch thick and a dual mount design for use with 6 inch bolt spacing.
Check Stock

Handi-Shim, White HS1840WH Plastic Construction Shims/Spacers, 40 Pack, 1/8-Inch, 40, 40 Count

  • Cost 20 Percent less than the average shim and are available in four color-coded thicknesses and 15 combinations of sizes and quantities.
  • Handi-Shims form a secure, flat base with only one shim (not needing to overlap two wedge-shaped shims).
  • Made of plastic, Handi-Shims resist compression, will not rot, and can be reused in many applications.
  • Handi-Shims can serve as high-precision spacers and scribes.
  • Handi-Shims can be easily and neatly cut into smaller units for small-scale jobs and can be easily secured using a pre-drilled screw hole.
Check Stock

12 Pieces 304 Stainless Steel Strips Stainless Steel Shim Stock Assortment 1 Width x 6 Length 0.001 0.0015 0.002 0.003 0.004 0.005 Thickness Metal Shims

  • ✔ 304 stainless steel strips are made of premium 304 stainless steel which has excellent rust & corrosion resistance performance and widely loved by people..
  • ✔ Stainless steel shims are bendable, smooth surface without burrs, can be machined or cut into various parts such as gaskets, washers, shims and spacers..
  • ✔ With 6 popular thicknesses to meet your various needs, 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005" thickness,6" length x 1" width, 2 pieces for each thickness..
  • ✔ Stainless steel shim stock widely used in all kinds of gaskets,mechanical parts,electronic components,metal stamping parts,chemical equipment,machine repair and maintenance,precision machinery,and so on..
  • ✔ Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

12 Pcs 304 Stainless Steel Strips Sheet Shim Metal Shim Stock Gap Filler Trim Strip for Kitchen DIY Craft Making Marine Application 0.001 0.0015 0.002 0.003 0.004 0.005 Inch Thick 1x 6 Inch

  • Sturdy Material: our shim sheet is made of 304 stainless steel material, rust and corrosion resistant, sturdy and strong, not easy to break or fade, so you can buy and use it with confidence.
  • Convenient in Daily Life: these stainless steel strips are bendable that they allow you to machine or cut into various parts, like washers, metal shims, spacers and so on.
  • Also, you can DIY crafts according to your imagination.
  • Size Information: these stainless steel shims measure about 152.4 x 25.4 mm/ 6 x 1 inches, featuring various kinds of thickness, including 0.001 inch, 0.0015 inch, 0.002 inch, 0.003 inch, 0.004 inch, 0.005 inch, which can meet your different uses.
  • Ample Quantity to Meet Your Demand: you will receive 12 pieces of stainless steel sheets in total, which are enough to satisfy your various uses and replacements, 6 different thickness, 2 for each thickness.
  • Applicable Occasions: these stainless steel metal strips can be widely applied for precision machinery, electronic equipment, processing equipment, mechanical parts, stamping parts, hardware manufacturing and so on.
Check Stock

01 Rv Pedestal Table Leg, Detachable Table Legs Aluminum Alloy Removable for Rv Marine Boat for Yachts Motorhome

  • ...en equipment, and stabilize table umbrellas..
  • LANDSCAPING LEVELER: Whether its a DIY project for your yard or you're a professional landscaper, our heavy duty shims can handle any size project! Use our BigGap Wobble Wedges to secure landscape stones and pavers and level concrete blocks..
  • MADE IN USA - MODULAR DESIGN: Precision engineered tapered leveling plastic shims feature interlocking ridges for a non-slip grip on both sides. You can securely stack these spacers with standard and mini Wobble Wedges to fit and level any space. These rigid plastic shims do not shrink or swell with temperature change..
Check Stock

Real Avid Scope Leveling Kit & Precision Scope Level System | Complete Scope Mounting Kit for Mounting, Aligning & Leveling Rifle Scopes | Perfect Tool for Gunsmithing & Hunters

  • ACCURATE: Proper Scope mounting, and alignment of your scope is critical to achieving accuracy. The Level Right Pro is a deluxe scope mounting kit designed to allow scopes to be perfectly leveled on firearms with ease..
  • ALL YOU NEED Scope alignment leveling system attaches to square the scope to the receiver and barrel.
  • the rechargeable light projects the reticle onto the precision alignment grid to allow you to rotate the scope in the mounting rings for perfect scope alignment..
  • INCLUDES: Level Right Pro Face Plate with Scope Saddle, Standard barrel attachment, Picatinny top rail attachment, Rechargeable Reticle Projection Light with USB Charging Cable, and the Precision Alignment Grid with Mini Tripod..
  • MOUNT IT RIGHT: Two leveling reference points level and align scopes in 4 easy steps: its that simple. If precision scope alignment is what you seek, look no further..
  • PERFECT precision scope mounting kit for hunters, competitive shooters, gunsmithing and long range precision shooters..
Check Stock

302 Stainless Steel Round Shortening Shim Assortment (360 Pieces), Metric, With Case

  • Assortment includes 360 round shortening shims in a variety of sizes.
  • Precision die cut to fit close tolerances around a shoulder screw shank and fit under the screw head to shorten shoulder length.
  • Made of 302 stainless steel for corrosion resistance.
  • Comes in a compartmented plastic case for organized storage.
Check Stock

Highking Tool 17pc Universal Clutch Aligning Kit Flywheel Pilot Hole and Clutch Drive Plate Alignment Tool

  • For fast accurate alignment of flywheel pilot hole and clutch drive plate when assembling to car..
  • Precision manufactured steel bushes with chemically blacked finish..
  • Suitable for use on most cars and light commercial vehicles..
  • Chemically blackened steel components in presentation box..
  • Aids alignment of clutch plate for assembly..
Check Stock

Spectre Performance - SPE-4480 Water Pump Pulley Shim Kit

  • Use between the water pump flange and the pulley to space the pulley outwards for proper belt alignment.
  • Kit includes 3-1/16 inch shims for thickness totals of 1/16 inch, 1/8 inch and 3/16 inch.
  • Easy to install with no special tools or skills required.
Check Stock

Slotted Shim Assortment Kits - size b 3x3 assorted slotted shims

  • Convenient assortment to carry to job site.
  • Shims marked with thickness in decimal and metric.
  • Slotted shim is the best way to solve alignment and leveling problems on motors pumps generators and.
Check Stock