Categories

Best Steel Reaming

RIDGID 29993 227S Stainless Steel Pipe Reamer Tool, 1/2-inch to 2-inch Inner/Outer Reamer

  • Ideal for reaming on stainless steel and copper tubing.
  • 45 cutting edges on the interior cone allow for fast, clean inner reaming and outer deburring and beveling of tubes.
  • Hardened steel construction for maximum durability.
  • dual inch and metric measurement bar for ease of use.
  • Pipe reamer has a 1/2-inch to 2-inch (12 mm to 50 mm) outside diameter capacity.
  • RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.
Check Stock

PAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool

  • Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
  • Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
  • Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
  • Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
  • Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..
Check Stock

T Handle Tapered Reamer Tool 3-13mm(1/8-1/2 ), 6 Fluted Chamfer Bridge Pin Hole Handheld Chaser, 45# Steel 1/4\ Hex Shank Durable for Chamfering Taper Holes Countersink Latches Guitar

  • CHAMFER REAMING TAPER REAMER: 3-13mm (1/8-1/2) six-blade taper reamer, taper hole, chamfer deburring and other functions, convenient for screw sinking, convenient and quick..
  • PURPOSE 1: Removal of burrs: remove from wood, cut pipes, pipes and ducts. Internal deburring edge tool, the capacity is 1/8" to 1/2"..
  • PURPOSE 2: Enlarged bridge pin hole, headstock, hole for tuner and volume/tone knob.
  • LABOR-SAVING AND CONVENIENT: T-shaped handles can provide leverage, making reaming easier, stronger control, and easier turning.
  • effortlessly processing in sheet metal, plastic and other materials..
  • SIZE: 45#steel, 1/4” Handle 85mm Length + 128mm Length Reamer 3-13mm Reaming diameter range..
Check Stock

PAGOW T Handle Taper Reamer, 5-16mm Tapered 6 Hand Held Fluted Chamfer Reaming, Repairman's Bridge Pin Hole Reamer Woodworker Cutting Tools

  • Material: Made of hardened ball bearing steel (#9027) with precision ground cutting edges..
  • Tapered Reamer Diameter:1/8"-1/2"(3-13mm).
  • T-Handle Grip: Provides greater leverage and easier reaming. Provides leverage for easier operation and rotation,saving effort. Removable handle for compact storage..
  • Perfect tool kit for every DIY users to enlarge holes in wood. Suitable for reaming taper holes on wooden boards,chamfering,deburring,easy to screw counterbore..
  • Precision machined cutting edges smooth metal surfaces with little effort. Useful tool for removing burrs from steel, brass, aluminum, plastic, wood and wallboard..
Check Stock

QWORK 1/8\ - 1/2\ Tapered Straight Flute Handle Reamer T Handle Tapered Reamer Tool for Wood Plastic

  • High Quality - Made of premium 45# Steel, it is durable, stable and high strength. And the cutting edges is sharp for expanding the hole..
  • Function - It is an ideal way for reaming the hole in metal sheets and plastic without effort, which is not easy to drill..
  • Design - With removable T-handle, it can save you the power to reaming and control..
  • Specification - This reamer can expand hole of size from 1/8" to 1/2"..
  • 100% Satisfied Service - Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month!.
Check Stock

GooM Inner-Outer Reamer,3/16-inch to 1-1/2-inch5mm-35mm) Pipe Reamer,Burr Remover for PVC Tubing,Tubing Chamfer Tool,PVC Pipe Deburring Tool,Red

  • Features 3-cutting edges,Ideal for reaming on copper,aluminum,brass and soft steel tubing.
  • Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.
  • Sturdy plastic construction with stainless steel blades for extended tool life.
  • Pipe reamer has a 3/16-inch to 1-1/2-inch (5mm to 35mm) outside diameter capacity.
  • This Inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock

Drill America 1-1/4\ High Speed Steel Straight Flute Taper Pipe Reamer, DWR Series

  • Self-feeding spiral design for extra-fast and easy hand reaming.
  • Suitable for hand reaming on pipe, sheet metal or for enlarging conduit box outlets.
  • The model 2-S reamer is not suitable for power reaming.
  • Pipe reamer has a 1/4-inch to 2-inch (6 mm to 50 mm) pipe capacity.
Check Stock

Accusize Industrial Tools Over and Under Sizes 0.1240'' Thru 0.5010'' HSS M2 Premium Chucking Reamer Set, Right Hand Cut, 14pcs/Set, 5528-SX00

  • Over & Under Sizes — 0.1240" thru 0.5010".
  • Made from premium M2 H.S.S. Chucking reamers are designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses, and machining centers.
  • They are regularly pointed with a 45°chamfer. The straight-flute design is recommended for most general-purpose reaming.
  • Thru 1/2" diameter +.0002" -.0000". Above 1/2" to 5/8" +.0003" -.0000". Above 5/8" to 1-1/2" +.0001" -.0004.
Check Stock

Accusize Industrial Tools 29 Pc Set 1/16 to 1/2 inch by 1/64 in HSS M2 Premium Chucking Reamers Straight Flute Aluminum Case 5528-SF00

  • 29 PC Set: 1/16'' through 1/2'' By 64ths, Fractional size.
  • Made from premium M2 H.S.S. Chucking reamers are designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses, and machining centers.
  • They are regularly pointed with a 45°chamfer. The straight-flute design is recommended for most general-purpose reaming.
  • Thru 1/2" diameter +.0002" -.0000". Above 1/2" to 5/8" +.0003" -.0000". Above 5/8" to 1-1/2" +.0001" -.0004.
Check Stock

uxcell Chucking Reamer 5/16\

  • GREAT QUALITY: These reamers are made of high speed steel, high hardness for rust protection, durability and long service life,with oxidation surface has good strength of extension and corrosion resistance in many environments..
  • MAIN FUNCTION: Applicable for reaming to mold processing and handicraft processing..
  • WIDE APPLICATION: Widely used for bore machining, installed in drilling machine, milling machine, etc..
  • MATERIAL: Processed surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
  • SHANK DIAMETER: 3/4/5/6/7/8/9/10/11/12mm..
Check Stock

MK Morse 116244-MKM 050326116244, multi, one size

  • Applicable Plates: Burr free reaming, suitable for stainless steel, carbon steel, iron plate, aluminum plate, plastic plate, etc..
  • 4Pcs Drilling Tools: Including 3pcs step drill bit and a center punch, commonly used for woodworking grooving, drilling and cutting, etc..
  • Universal Shank: With universal shank type, can be installed on lithium electric drills, hand drills, bench drills and other equipment..
  • High Speed Steel: These drill bits are made of excellent high speed steel, with HRC58‑65 hardness, wear resistant and durable..
  • Multiple Specifications: The step drill can be used to drill holes of different specifications without changing the drill bit, which is convenient and practical..
Check Stock

4LIFETIMELINES Rimming & Deburring Tool for 3/16 to 1/2 Tubing

  • Works with 3/16″ (4mm) through 1/2” (14mm) O.D. steel, copper, copper-alloy, & aluminum tubing.
  • Perfect for brake, fuel, transmission, and coolant lines.
  • Three cutting edges ensure clean, even deburring every time..
  • Reaming and deburring lines allows for the best possible flaring and joining of tubing without the risk of metal shards contaminating the job.
  • Jaws and blades are formed from high-strength steel and are retractable into the billet steel body for safety.
Check Stock

SKILSAW 80111 Worm Drive Saw Lubricant, Black

  • Multi-purpose cutting wax specially formulated to extend tool life and reduce chip welding when drilling, reaming, and threading metal. Ideal when cutting metal using twist drills, taps, annular cutters, carbide tipped hole cutters, reamers, and more.
  • Provides a precision finish with closer tolerances on finished work..
  • Formulated to cling to tools for a continuous shield against friction and heat.
  • Effective when cutting steel, stainless steel, aluminum and many exotic alloys.
Check Stock