DERNORD Tri Clamp Bowl Reducer Sanitary Fitting Stainless Steel 304 (Tri Clamp Size: 4 inch x 2 inch)
- Bowl Reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
- Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
- Stainless steel 304 for resistance to corrosion and high temperatures.
- Tri Clamp Bowl Reducer Ferrule Size 119MM fits 4" tri clamp.
- Tri Clamp Bowl Reducer Ferrule Size 64MM fits 2" tri clamp.
Check StockQMINOX 2 Inch × 1.5 Inch Sanitary Fitting End Cap Reducer Stainless Steel 304 Sanitary Concentric Reducer Tri Clamp Clover
- End Cap Reducer Ferrule Size 64mm = 2 Inch Tri Clamp.
- End Cap Reducer Ferrule Size 50.5mm = 1.5 Inch Tri Clamp.
- Concentric End Cap Reducer Fitting to Connect 2 Pipes of Different Diameters That are Along The Same Pipe Axis.
- Sanitary Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
- Stainless Steel 304 Sanitary Fitting for Resistance to Corrosion and High Temperatures.
Check Stock
CURT 45408 Trailer Hitch Receiver Adapter Reducer Sleeve Set, 3 to 2-1/2 or 2-Inch, 2-Piece
- VERSATILE ADAPTER. This trailer hitch adapter sleeve set easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 3-inch receiver and accepts a 2-1/2-inch shank.
- STANDARD FIT. This trailer hitch receiver adapter set measures 3-inch x 3-inch to fit any industry-standard 3-inch trailer hitch receiver. It also accepts any industry-standard 2-1/2-inch or 2-inch shank.
- SOLID STRENGTH. This hitch receiver reducer adapter set is constructed from high-strength steel to ensure reliable towing for the road ahead. Its gross trailer weight ratings and tongue weight ratings are limited to the capacity of the trailer hitch.
- CORROSION-RESISTANT. This trailer hitch reducer sleeve set is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
- EASY TO INSTALL. Installing this trailer hitch reducer sleeve set is fast and easy. You can use each of the included reducer sleeves as needed by simply inserting them into your hitch receiver (hitch pin sold separately).
Check Stock
3Pcs 1/4\ 3/8\ 1/2\ Bits 360°Rotatable,Impact Grade Socket Adapter/Extension Set Turns Power Drill Into High Speed Nut Driver,for Cordless Drills Ratchet Extension,Universal Socket Wrench Adapter Set
- ...sting tool. Provides additional length to reach into a multitude of hard to reach spaces. The spring ball lock ensures a tight fit into the driver head to prevent slipping during use. Specifically machined to fit securely into a hand held driver, drill driver or impact wrench.for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Sock.
- 〖Material〗：Chrome Vanadium QUALITY: Made from Heat-Treated Hardened Chrome Vanadium (Cr-V) Steel to ensure a long lifetime through tough torque jobs without breaking or rusting – Heavy Duty Construction to be compatible with the most powerful impact guns.for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Socket Extension Bar Set,Drive Impact Socket Set.
- 〖PACKAGE CONTAINS〗：3-Piece Power Drill Sockets Adapter Sets, 360°Rotatable Hex Shank Impact Driver Socket Adapter, Socket to Drill Adapter 1/4" 3/8" 1/2" Impact Driver Adapter,Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion. for Universal Socket,Impact Adapter and Reducer Set,So....
Check StockSprayMax 2K Activated EPOXY Primer Black 3680034
- Easy 4:1 mix primer with optional 5-10% reduction with 0 voc reducer (SMR-0075).
- Great adhesion to Steel, Aluminum, Fiberglass, Body fillers and Existing finishes.
- Lays down super smooth at 4:1 or with optional 5-10% 0 voc reducer (SMR-0075).
- Excellent adhesion and corrosion resistance.
Check StockDGT35 Galvanized Round Transition (5\)
- 【Size】Made of galvanized steel. Adapts 8 inches to 6 inches. Round Ducting Adaptor.
- 【Widely Application】Designed for bathroom extractor fans, HVAC systems, inline ventilators, cooker hoods, tumble dryers, hydroponics, kitchen..
- 【Adventages】Maintains airflow efficiency by creating a connection between two different sized duct openings..
- 【How to Use】The solid duct reducer or increaser can be used when connecting two different solid or flexible ducts or ducts to ventilators, 8 to 6 inch, or vice versa..
- 【Easy to Install】Put it in the two ducting, easy to install the air duct reducer..
Check StockSof Feet Callus Reducer 20 Pack Replacement Abrasive Screens
- Reducer Screens are available in convenient packs 12 and 20 packs.
- gently rub callused areas to remove hardened skin..
- When the screen becomes filled with dry tissue, simply tap the reducer on a dry towel..
- When the callus reducer screen does become worn, simply loosen the callus reducer thumbscrew and replace..
Check StockEpoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray Gallon Kit, SMR-260G/261
- Easy 4:1 mix primer with optional 5-10% reduction with 0 voc reducer (SMR-0075).
- Great adhesion to Steel, Aluminum, Fiberglass, Body fillers and Existing finishes.
- Lays down super smooth at 4:1 or with optional 5-10% 0 voc reducer (SMR-0075).
- Excellent adhesion and corrosion resistance.
Check StockEpoxy Fast Dry 2.1 low voc DTM Primer & Sealer Black Gallon Kit, SMR-260B/261
- Easy 4:1 mix primer with optional 5-10% reduction with 0 voc reducer (SMR-0075).
- Excellent adhesion and corrosion resistance.
- Lays down super smooth at 4:1 or with optional 5-10% 0 voc reducer (SMR-0075).
- Great adhesion to Steel, Aluminum, Fiberglass, Body fillers and Existing finishes.
Check Stock
CURT 45405 Trailer Hitch Receiver Adapter Reducer Sleeve, 2-1/2 to 2-Inch
- VERSATILE ADAPTER. This trailer hitch adapter sleeve easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 2-1/2-inch receiver and accepts a 2-inch shank.
- STANDARD FIT. This trailer hitch receiver adapter measures 2-1/2-inch x 2-1/2-inch to fit any industry-standard 2-1/2-inch trailer hitch receiver. It also accepts any industry-standard 2-inch x 2-inch shank.
- SOLID STRENGTH. This hitch receiver reducer adapter is constructed from high-strength steel to ensure reliable towing for the road ahead. Its gross trailer weight ratings and tongue weight ratings are limited to the capacity of the trailer hitch.
- CORROSION-RESISTANT. This trailer hitch reducer sleeve is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
- EASY TO INSTALL. Installing this trailer hitch reducer sleeve is fast and easy. You can use it as needed by simply inserting it into your hitch receiver (hitch pin sold separately). Then, hitch up your trailer or hitch accessory.
Check StockDTM 2.1 voc Grey Urethane Primer & Sealer gallon kit, 4:1 mix, SS-2000G/SMR-222
- Epoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray.
- Easy 4:1 mix primer with optional 5-10% reduction with 0 voc reducer (SMR_0075).
- Excellent adhesion and corrosion resistance.
- Great adhesion to Steel, Aluminum, Fiberglass, Body fillers and Existing finishes.
- Lays down super smooth at 4:1 or with optional 5-10% 0 voc reducer (SMR-0075).
Check StockEpoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray Quart Kit, SMR-260G-Q/261-8
- Epoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray.
- Easy 4:1 mix primer with optional 5-10% reduction with 0 voc reducer (SMR_0075).
- Excellent adhesion and corrosion resistance.
- Great adhesion to Steel, Aluminum, Fiberglass, Body fillers and Existing finishes.
- Lays down super smooth at 4:1 or with optional 5-10% 0 voc reducer (SMR-0075).
Check Stock
Keenso Pocket Bike Sprocket, 13 Teeth Pinion Gear Motor Bicycle Chain Wheel 13T Freewheel Gear Motor Universal for Bicycle
- 【Durable Carbon Steel】--- This is a pocket bike sprocket, made of quality carbon steel, sturdy and durable for long use term.
- 【Specifications】--- Condition: 100% Brand New, Item Type: Pinion Gear, Material: Carbon Steel, 1016Z2 and Z3 reducer motor 13 tooth pinion, Number of teeth: 13, Teeth distance: 12.7 mm, Teeth Thickness: 3 mm, Inner diameter: 11 mm, Outer diameter: 58 mm, Thickness: 9 mm, Bolt width: 4mm (fixed tip key width), Applicable chain: ordinary bicycle chain (model 1/2x1/8), Applicable motor: 1016Z2, 1016Z3, 1018 reducer motor.
- 【Easy to install】--- Small size, lightweight. Very easy to install, and smooth performance. Suitable for ordinary bicycles.
- 【Size】--- The bicycle chain gear has 13 teeth, a pitch of 12.7 mm and a thickness of 3 mm.
- 【Service】--- We are here with a 100% product promise to give you the best customer support. Do not hesitate to contact us if you are not satisfied for any reason..
Check Stock
