Categories

Best Steel Reducing Bushings

uxcell Bearing Sleeve 8mm Bore x 12mm OD x 15mm Length Self-Lubricating Sintered Bronze Bushings 3pcs

  • Bore: 8mm, Outside Diameter: 12mm, Length: 15mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

uxcell Bearing Sleeve 10mm Bore x 16mm OD x 15mm Length Self-Lubricating Sintered Bronze Bushings 6pcs

  • Bore: 10mm, Outside Diameter: 16mm, Length: 15mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

uxcell Bearing Sleeve 6mm Bore x 10mm OD x 6mm Long Self-Lubricating Sintered Bronze Bushings 10pcs

  • Bore: 6mm, Outside Diameter: 10mm, Length: 6mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

Orangatang Knuckles Soft Longboard Skateboard Truck Bushings (Orange, Set of 4)

  • LIVELY BUSHINGS – Crafted for quick turning response and smooth edge-to-edge transitions, Orangatang Knuckles are the ultimate high-energy bushing upgrade for carving, pumping, dancing, and freestyle longboarding..
  • RESPONSIVE DESIGN – Two unique shapes for highly responsive and customizable turning. Compatible with most trucks. The insert barrel features a small “step” to fill the gap between the kingpin and the hole of the hanger, reducing play in the assembly for a more precise response. The gumdrop is a smooth and subtle blend between a barrel and the more traditional cone shape, providing enhanced agility. The rounded edge allows for ultra-smooth turn initiation and improved interface with the washers..
  • HIGH-REBOUND FORMULA – Poured in our extremely high-rebound Randy Thane formula, ideal for responsive, energetic turning..
  • THE PERFECT SET – Pack contains two insert barrel bushings, two gumdrop bushings, two large cup washers, and two small cup washers..
  • SOFT – Great for tight turns and maximum agility..
Check Stock

uxcell Flange Sleeve Bearings 8mm Bore 12mm OD 12mm Length 16mm Flange Dia 2mm Flange Thickness Sintered Bronze Self-Lubricating Bushing 4pcs

  • Size - Bore Diameter: 8mm, Outside Diameter: 12mm, Total Length: 12mm, Flange Diameter: 16mm, Flange Thickness: 2mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

Titan Complete Quick Hitch Bushing Kit for 3 Point Hitch Tractors Top Link and Lower Lift Pins

  • QUICK HITCH BUSHING KIT: This 3Pt bushing kit allows you to adapt your implement to fit quick hitches. Simply slide the bushings onto your lower lift pins and top link pin to reduce and remove spacing for a better, more secure fit..
  • MADE FROM COATED STEEL: Each bushing will be made from zinc coated steel. This coating prevents the steel from rust and corrosion, so you do not have to worry about the bushings breaking down over time..
  • SIX TOP LINK PIN ADAPTERS: This Quick Hitch Bushing Kit will include 6 total top link adapters. These adapters range in length and thickness to allow you to convert category 0, category 1, and category 2 top link pins to better fit your quick hitch..
  • EASY INSTALLATION: With this bushing kit, installation is a quick and easy. Slide the top link bushing over your top link pin and use the shoulder bushings on your lower lift pins. Secure the shoulder bushings using the included roll pins by hammering them into position..
Check Stock

SHIMANO RD-M640 Zee Shadow Plus 10 Speed Rear Derailleur (Use with 11-32/11-36 Cassette)

  • Shadow Plus technology keeps the low profile shape reducing chainstay and other contact, and adds a chain tensioning device reducing noise and dropped chains.
  • Compatible with Dyna-Sys 10 speed Shimano products.
  • Aluminum construction with sealed bearing pulleys.
  • 4 fluoric coated link pivot bushings for smooth operation.
Check Stock

osemar Quick Hitch Adapter Bushings Fit for Category 1, 2 Pair! Quick Hitch Bushing Set and Pin

  • Feature: Quick Hitch Bushings is a Fast and Simple Conversion to Make Implements With Category 1 3-point pPins Compatible with a Quick Hitch..
  • Fitment: Cat 1 Bushings fit for John Deere, Speeco, Jeffers and many more quick hitches..
  • Material: Hitch Bushing Kit is coated with steel. Coated-steel surface treatment effectively prevents rust..
  • Installation: Easy to install and save time. You can only require a hammer to insert the roll pins..
  • Package include: 4 X houlder bushings, 4 X roll pins.
Check Stock

Prime-Line K 5131 White Storm Door Hinge Pin Kit (3-Pack)

  • Used as replacement door hinge pin kits for Croft storm doors and a variety of other storm door manufacturers.
  • Steel spring and nylon pins and bushings.
  • Kit contains 3 springs, 6 pins and 6 bushings.
  • Easy to install in less than 30 minutes with a few simple tools.
Check Stock

VMS RACING FRONT and Articulated Stainless Steel REAR LOWERING KIT Bolts and Bushings Compatible with Chevy Chevrolet Corvette C5 97-04 1997-2004 Complete Set

  • [ IMPORTANT ] VMS RACING Brand (NOT generic). Comes in VMS RACING Branded BOX. Brand New in Box / Never Used / Never Installed..
  • VMS Racing 14-piece Kit includes PREMIUM QUALITY, Grade-8 Bolts, Heavy-Duty Polyurethane Bushings, heavy-duty washers and Nylock nuts for the REAR. The FRONT is made of 100% CNC-machined STAINLESS STEEL with DELRIN BUSHINGS, WRENCH FLATS and ARTICULATING BALL STUD FOOT PADS for perfect alignment and smooth suspension travel..
  • Designed to lower your Corvette C5 up to 1.0 inch in the REAR and up to 1.5 inches in the FRONT. This is a DIRECT FIT. NO MODIFICATION to the STOCK COMPONENTS is required..
  • This kit has all you need to lower your front and rear end suspension on your Corvette C5. YOU NEED TO REPLACE THE BUSHINGS TO DO THIS JOB CORRECTLY. This set includes FOUR BRAND NEW POLYURETHANE BUSHINGS. The factory bushings on your C5 are close to 20-years old, DRY-ROTTED and NO LONGER SERVICEABLE. Do not buy any kit that does not include new bushings because you will end up having to source them elsewhere..
  • Compatible with Corvette C5 model vehicles 97 98 99 00 01 02 03 04 1997 1998 1999 2000 2001 2002 2003 2004 (does NOT fit F45, Selective Real-Time Dampening equipped Corvettes)..
Check Stock

MARASTAR 21018 Universal Fit 9x3.50-4 Lawnmower Tire/Wheel Assembly

  • Tire: 9x3. 50-4 tube type Smooth tread - pneumatic 2 Ply rating - check your existing tire Sidewall.
  • Wheel: solid gray steel, 3.5" Centered hub, 3/4" Sintered iron bushings.
  • Universal adapter kit includes: 2 - 5/8" Sintered iron bushings, 2 - 1/4" Nylon Spacers, 4 - steel washers.
  • Use: replacement for front mower tires 9x3. 50-4 (check Sidewall)/ not for highway speeds.
  • Low hassle, low cost solution to repair or replace your mower tires.
Check Stock

MARASTAR 00214 Universal Fit Flat Free 9X 3.50-4 Lawnmower Tire Assembly, Black

  • Tire: 9x3. 50-4 flat free Smooth Tread - check your existing tire Sidewall.
  • Wheel: solid Black Steel, 3.5" CENTERED hub, 3/4" sintered iron bushings.
  • Universal adapter kit includes: 2 - 5/8" sintered iron bushings, 2 - 1/4" nylon Spacers, 4 - Steel washers.
  • Use: replacement for front mower tires 9x3. 50-4 (check Sidewall)/ not for highway speeds.
  • Low hassle solution to repair or replace your mower tires.
Check Stock

Shark 2011 5-Inch by 0.5-Inch by 0.5-Inch Bench Seat Grinding Wheel with Grit-60

  • High performance on a multitude of materials.
  • Made of regular aluminum oxide in a vitrified bond Bench wheel is packed with telescoping bushings to accommodate popular machine spindle sizes.
  • Bench wheel is packed with telescoping bushings to accommodate popular machine spindle sizes.
  • HIGH PERFORMANCE: PFERD Bench grinding wheels offer a high dimensional stability and abrasive performance for working with a large variety of materials and for many different applications.
  • COMPATIBILITY: PFERD high-quality bench grinding wheels have been adapted to the standard bench grinders on market. Telescopic bushings for mounting on almost any bench grinder spindle are integrated.
  • UNIVERSAL TYPE: The UNIVERSAL version of the grinding wheel is ideal for general use in the workshop. Workpiece materials that can be worked are steel, cast steel, stainless steel (INOX) and cast iron.
  • LONG SERVICE LIFE: Dressing the disc on a regular basis exposes sharp grain and maintains an even grinding area. Constantly adjust the workpiece support to the wheel diameter, gap width max. 1/8”.
  • DELIVERY KIT: 1 x PFERD Bench grinding wheel | Vitrified bond | UNIVERSAL type | 6'' dia. | 1/2" thickness | 1'' bore | Flat (type 1) | Alumi....
Check Stock