Categories

Best Steel Sill

LBG Products AC Window Air Conditioner Bracket,Heavy Duty Support Brackets 9,000 to 22,000 BTU Universal Sized Unit,165lbs

  • ✅SPECIAL DESIGN: Support most of the window units 9000-22000BTU. Transfer the stress and weight from the window sill to the bracket for safety,....
  • ✅EASY INDOOR INSTALLATION:No outdoor work needed. Built in Bubble Level for your convenience to adjust mounting angle；No drilling of outside wall....
  • ✅WIDELY USED：Adapts to most window styles, Compatible with 4″-15″ thick walls with window sill, and window sill should at least 2″ thick to....
  • ✅STRONG QUALITY: Made of Solid galvanized, epoxy-coated steel, which prevent the A/C to drop out of the window；Expansion screws are usually....
  • ✅UNIVERSAL DESIGN: Compatible with any brand window units 5,000 to 22,000 BTU , and supports up to 165 lbs..
Check Stock

CEBAT 4Pcs Stainless Steel Car Door Sill Scuff Plate Guard Sills for Honda CRV 2017-2021 Automotive Door Entry Guard Protector Trim

  • Specially Design: Fit for Honda CRV 2017 2018 2019 2020 2021,Not suitable for two door coupe .(Please carefully check whether your vehicle is suitable for this product before buying).
  • High-Quality Material: The sill cover is made of Stainless Steel and Rubber. even if it is trampled by high-heeled shoes, it can well protect the paint surface. If it is parked in the outdoor parking lot at high temperature day and night, it will not foam or change..
  • Easy installation: Clean the target surface to ensure that there is no oil and dust.
  • Remove the protective film of the strong tape and paste it to the correct position.
  • Press the surface firmly after installation to make the sticker completely match the car surface..
  • Multifunctional:Protect the inner sill from scratches / scratches when you enter or exit the vehicle.It is reflective for your car. It is also can highlight the beauty of car body. At the same time, it is smooth and easy to clean. Whether it is dust or dirt, cleaning the surface with a brush rag slightly, it will become new immediately..
  • Package Includes:2Pcs Front Car Door Sill Scuff Plate Guard & 2Pcs Rear Car Door Sill Scuff Plate Guard..
Check Stock

Universal Window Air Conditioner Bracket Universal AC Window Support Bracket - Heavy Duty Support Up to 165 lbs 5,000 to 22,000 BTU AC Units

  • UNIVERSAL DESIGN - Adapts to most window units , its wall thickness from 4" to 15" or window sill thickness from 2'' to 15'', Compatible with any....
  • INDOOR INSTALLATION - Easy breezy install, without exterior work, no drilling of outside wall or siding, just drilling into window sill, less harm for....
  • RELIEVE STREE ON THE WINDOW - Transfers the stress and weight from the window sill and sash to the support and window frame for safety..
  • FITS WALL THICKNESS from 2" to 15", exclusive built-in bubble level to correct mounting slope position..
  • STRONG QUALITY: Made of Solid galvanized, epoxy-coated steel, supports up to 165 lbs ,which prevent the A/C to drop out of the window..
Check Stock

Universal Window Air Conditioner Bracket Universal AC Window Support Bracket - Heavy Duty Support Up to 85 lbs Designed for 5,000 to 12,000 BTU AC Units.

  • UNIVERSAL DESIGN - Adapts to most window units , its wall thickness from 4" to 15" or window sill thickness from 2'' to 15'', Compatible with any....
  • INDOOR INSTALLATION - Easy breezy install, without exterior work, no drilling of outside wall or siding, just drilling into window sill, less harm for....
  • RELIEVE STREE ON THE WINDOW - Transfers the stress and weight from the window sill and sash to the support and window frame for safety..
  • FITS WALL THICKNESS from 2" to 15", exclusive built-in bubble level to correct mounting slope position..
  • STRONG QUALITY: Made of Solid galvanized, epoxy-coated steel, supports up to 85 lbs ,which prevent the A/C to drop out of the window..
Check Stock

Gilneas Door Sill Guards Kit for 2020,2021,2022 Jeep Gladiator JT Accessories Parts,Door Entry Guard Protector Kit Plate Cover with Logo 4 pcs,Black

  • 【ADAPTABILITY】Gilneas door sill guards kit fit for Jeep 2020,2021,2022 Gladiator JT 4 door..
  • 【HIGH QUALITY】Door sill protector is made of high-quality plastic, durable, scratch-resistant and easy to clean..
  • 【PROTECTIVE】Door entry guard kit can not only prevent the door sill of the Jeep Gladiator from scratching, but also decorate the door sill to make....
  • 【SPECIAL DESIGN】Our door sill guards has strong double-sided tape, each door sill guard comes with 2 strips of double adhesive tape on the back,....
  • 【EASY TO INSTALL】Measure and clean the area to be pasted (it is recommended to use an alcohol wipe to clean door sill), and stick it after the....
Check Stock

SUPAREE Door Sill Guards Kit, Black Rubber Door Entry Guards for 2018-2021 Jeep Wrangler JL JLU Gladiator JT 4-Door Accessories Parts Door Sill Protector Replacement, 4pcs/Set

  • 【APPLICATION】SUPAREE door sill guards kit fits for 2018 2019 2020 2021 Jeep Wrangle JL JLU Gladiator JT 4 Door..
  • 【PROTECT YOUR DOOR SILLS】Door sill entry guards prevent the interior door sills from scratches, scuffs and other damage. And the door sill guards can cover up existing damage, which is a great decoration for the door sills..
  • 【HIGH QUALITY MATERIAL】The Door sill protector are made of black rubber, durable, long-lasting and scratch resistant. Compared to the plastic, bendable rubber has better toughness and wear resistant..
  • 【EASY INSTALLATION】Our door sill guards have double-sided tape adhesives tape on the back, just stick them on the clean door sill directly. No cutting or drilling required. Quick installation within 5 minutes..
  • 【PACKAGE INCLUDED】2 pcs front door sill guards and 2 pcs rear door sill guards. Full 100% satisfaction AFTER-SALES included. If there are any issues, simply reach out to us. Get one risk free! 100% satisfaction aftersale services..
Check Stock

Topfit for Tesla Model 3 Door Sill Protector Scuff Plates Matte Carbon Fiber ABS Front and Rear Door Car Pedal Kick Protection Strip Styling Covers Accessories

  • CUSTOMIZED-The door sill cover is design for Model 3 2018 2019 2020 2021 2023,Fit all Model 3 and protect your wonderful Model 3..
  • MULTIFUNCTION-The door sill protector can protect the door opening or closing,and prevent the hurt from shoes scuffs.Mine is clearly people not lifting their shoes up enough,would makes the car look used and un-kept.
  • Have this door sill you will stay away from these troubles..
  • MATERIAL-These are not vinyl stickers but real PU coated carbon fiber and strong enough to take the knocks and resist scuffs.high quality would be lighter and will not scratch the plastic door of the original car..
  • SHOWS RESULTS-Carbon fiber liners will have a more refined look,More matching with your center console and dash cover..
  • INSTALLATION&REMOVAL-Clean the door sill with water and alcohol,then Line up the corners of the carbon fiber door sill to the door sill on your model 3,put your hand over it to make sure the glue grips firmly.To remove the door sill, take a hair blow dryer or heat gun to the molded carbon fiber door sill..
Check Stock

ALPINE HARDWARE Premium Heat Pump Drillless Drill-Less Window Air Conditioner & Heat Pump Bracket - Window AC Support - Supports Air Conditioners Well Over 200 lbs. - No Drilling 2022 Model

  • PATENTED STEEL CONSTRUCTION DRILL-LESS DESIGN – Our bracket support eliminates drilling into your window sill completely making for an easy, drill free installation..
  • ADAPTS TO ANY WINDOW STYLE – The AC Bracket works with a wall thickness of 3″ to 12″ and works for window openings that are 27-38 inches wide..
  • SAFE, DURABLE & CONVENIENT – Dual AC brackets relieves the stress on the window and holds well over 200lbs with simple installation from inside your window..
  • WORKS WITH ALL BRAND NAME AIR CONDITIONERS – All necessary air conditioner mounting bracket hardware is included & works with all brand name air conditioners..
  • WINDOW SILL PROTECTION – Sturdy and strong support that will prevent damage to your window sill and wall by removing the pressure and weight of an air conditioning unit..
Check Stock

Daisypower AC Window Air Conditioner Bracket Light Duty, Sturdy Structure Supports Up to 85lbs, Designed Small A/C Units 5,000~10,000BTU

  • [ EASY INDOOR INSTALLATION ] – No exterior work needed, the whole installation can be done indoor, just drilling 3 holes into window sill, less harm for windows.
  • [ UNIVERSAL DESIGN ] – Supports any window ac unit of up to 85 lbs, adapts to window sill thickness 2” to 15’’ space, fits to common single / double hung window with window sill, Usually fits for brick, cement and wood sills, not suitable for hollow aluminum sills..
  • [ DURABLE MATERIAL ] – Made of heavy-gauge steel with epoxy-coated surface treatment for long lasting outdoor service, which prevent the AC unit from dropping out of the window ..
  • [ STURDY STRUCTURE ] – Built-in Bubble Level to indicate mounting angle, easy adjustment. This bracket which design to hold your AC unit and transfer the pressure from the window to your wall..
  • [ IN THE BOX ] -All necessary hardware included, anti-slippery Rubber mounts design which fits different walls, no damage to outside wall..
Check Stock

Mxclimate AC Window Air Conditioner Support Bracket,Support Up to 85 lbs Light Duty, Easy To Install Universal A/C Unit Mount for 5000-12,000 BTU

  • 【UNIVERSAL DESIGN】:Mxclimate window air conditioner support bracket design to relieves the stress and weight from the window sill and sash to the support and window frame for safety..
  • 【COMPATIBILITY】:The AC bracket for window is compatible with any brand window units 5,000 to 12,000 BTU ,supports up to 85 lbs..
  • 【INSTALLATION REQUIRMENT】:The installation of window air conditioner mounting support bracket fits wall thickness from 4″ to 13″ or window sill thickness from 2” to 13”.Usually fits for brick,cement and wood sills, not suitable for hollow aluminum,vinyl,plastic sills.
  • 【LESS DRILL】Just drilling 3 holes into window sill,less harm for windows and the outside wall.Rubber pads protect walls from scratches.built-in bubble level to correct mounting slope position.
  • 【STRONG QUALITY】Made of solid galvanized, epoxy-coated steel.anti aging.weatherproof.designed for long term outdoor service.Prevent the ac drop out of the window.
Check Stock

4WD Retro T-Shirt Offroad Overland 4x4

  • HIGH QUALITY MATERIAL - This item is made of high quality black carbon fiber material, Decorative sill protectors cover existing scratches and prevent....
  • Multifunctional: -Protect the inner sill from scratches / scratches when you enter or exit the vehicle.It is reflective for your car. It is also can....
  • Easy to install-this scratch-resistant black carbon fiber door sill guard is very durable, flexible, bendable (will not break or break), and there is....
  • PACKAGE INCLUDES - 2Pcs Front Car Door Sill Sticker ( 1 Pair ) 2Pcs Rear Car Door Sill Sticker ( 1 Pair ) 1 squeegee..
  • 100% SATISFACTION - Good quality material, keep driving safe! Please feel free to contact us if any question!.
Check Stock

Chefs: Ramesh Pillai, Roy Khoo, and Josef Teuschler

  • 【Package】: 4pcs Puerto Rico Flag Carbon Fiber Car Door Front/Rear Sill Plate Protectors (2 for front door+2 for back door).
  • 【Material】It is made of UV resistant vinyl that features a carbon textured finish.
  • 【Easy to clean】 After being soiled, wipe it with a towel to clean it.
  • 【Anti-Dirty】: These Door Entry Guard Stickers protect your car by protecting the door sill from being scraped and dirty, and it does not corrode the paint on the sill while making your car high class, unique and different from any other..
  • 【Easy to Install】: Easy to install with adhesive. Clean the door sill before installing, then stick the sticker carefully to the sill and make it smooth..
Check Stock

OMIMO Door Sill Plate Protector Fit for Dodge Durango Accessories 2011-2022 Door Entry Scuff Guard Anti-Scratch Car Door Entry Guards Welcome Pedal Protector Cover 4Pcs White

  • Custom fit: Our door sill plate protector fit for Dodge Durango 2011-2022. Please check this door entry scuff guard whether it is fit for your Dodge....
  • Function: The door sill plate protector can not only cover car scratches and protect door sill and any surface from scratches, scuffs and chips..
  • Easy to Install: Clean vehicles thresholds surface, make sure it without any oil and dust,keep it dry and tidy. Tear off the protective film of the....
  • Material: This door sill plate protector made for high-quality carbon fiber leather, which is thicker, waterproof, wear-resistant and durable..
  • Customer service: If you have any question or our Our door sill plate protector don't fit for your Dodge Durango sill, please feel fit to contact our....
Check Stock