Categories

Best Steel Spiral Point Plug Taps

DelitonGude Metric M5 Machine Screw Tap 10pcs 5% Cobalt Spiral Flute Drill Taps Metric M5 Thread Tapping Tool(M5)

  • Great product and very good quality. Made from M35 Hight-speed Steel and 5% Cobalt.The surface was nitrogen treated,which does't rust, very durable.Size:M5X0.8mm.
  • Used to make new threads or re-thread damaged or jammed threads.Spiral groove taps have a longer service life than ordinary straight groove taps and can be used repeatedly..
  • Spiral Flute design, well chip removal, Easy tapping.With spiral flute taps, it is not necessary to repeatedly advance and retreat the taps and chips during tapping, which effectively improves the tapping efficiency.
  • because the chips are unobstructed, the chips will not be blocked in the narrow flutes..
  • Strong Box package Included: 10Pcs Spiral flute Metric Taps.
  • Suitable for taping Blind hole,Such as Steel Cast Iron, Aluminum Alloy and other non-heat treater Metal,Hardness less than HRC30..
Check Stock

Drilling, Reaming, Tapping and Milling on the Drill Press (DVD)

  • High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
  • High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
  • Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
  • High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
  • Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check Stock

Champion Cutting Tool Brute Platinum XLT Tapper: Power Tapper, Tapping Tool

  • High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
  • High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
  • Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
  • High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
  • Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check Stock

6Pcs 2-in1 Combination Drill and Tap Set TOPINCN Titanium Coated HSS Metric Hex Shank Screw Taps Tool Set

  • ¡¾HIGH QUALITY¡¿ - 100% brand new and high quality. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • ¡¾USE FOR TAPPING VARIOUS THREADS¡¿- There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
  • ¡¾SPIRAL FLUTES¡¿ - Taps are designed with spiral flutes and the chip clearing process would be better. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • ¡¾SMOOTH TAPPING¡¿ - They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
Check Stock

Tap Drill Bit Set, M3-M10 Tap Drill Bits Kit Titanium Coated HSS Drill and Tap Bits 1/4\ Hex Shank Metric

  • High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
  • Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.
  • Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
  • 6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
  • Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
Check Stock

Viking Drill and Tool by Norseman 57580 SP-18TD Type 20-UB Spiral Point Plug Style Magnum Super Premium Tap/Drill Set

  • 18 pc. Tap and Drill Set Premium High Speed Steel Spiral Point, NC.
  • Contains: #36, 29, 25, 21, 7, F, 5/16, U, 27/64, 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13.
  • Set includes tap and corresponding drill bit.
Check Stock

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

  • Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
  • Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
  • Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
  • Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
  • Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • ...1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • ...1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

IRWIN Tap And Die Set with Drill Bits Machine Screw/SAE/Metric 117-Piece 26377

  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair.
  • Constructed of high carbon steel for durability.
  • Puts commonly needed taps, dies, drill bits, and extractors at your fingertips.
  • Perfect set for the professional craftsman.
  • Contains 117 of the most commonly needed machine screw plug tap and hex die sizes, drill bits, spiral screw extractors, an adjustable handle tap wrench, 2-in-1 tap wrench, t-handle wrench, pitch gauges, and a plastic case.
Check Stock

Thread Taps Drill, 7Pcs/Set Better Chip Removal Spiral Combination Tap Easy Installation High Speed Steel for Soft Metal(#2)

  • High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
  • Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
  • 6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
  • Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
  • Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.
Check Stock

6PCS Combination Drill and Tap Bits, Metric Thread M3-M10 HSS Drill Bit Set 1/4” Hex Shank Screw Tapping Tool for Tapping and Lathe (Titanium Plating)

  • 【6 Different Sizes】 6 sizes in one drill and tap bit set (M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5) to meet your diversified requirements, can use for tapping various threads.
  • 【Designed with Drilling Function】 They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • 【Spiral Flutes Design】 These taps are designed with spiral flutes and the chip clearing process would be better.
  • 【High Hardness & Rust Resistance】 These taps are made by high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • 【Widely Application】 Suitable for drilling and tapping on wood, plank, plastic, soft metal like aluminum, iron, etc. Ideal for hole drilling, tapping and deburring/countersinking applications.
Check Stock

DEWALT Drill Tap, UNC, 3/8-Inch (DWADT3816)

  • ★ 【HIGH QUALITY】 These valves are made of high speed steel and present a finish of surface by nitriding for a duration and a resistance is elevated to the rust for a prolonged service life..
  • ★ 【DIFFERENT SIZES】 There are total of 6 pieces of taps in different sizes from M3 to M10 which you can use to tap various files.
  • ★ 【SPECIAL DESIGN】 The taps are designed with spiral splines and the chip reteying process would be better.
  • ★ 【FUNCTION】 These are taps with drilling function, used to drill hole and cut new threads at the same time, you will get smooth tapping experience with them.
  • ★ 【WIDE APPLICATION】 These taps are used on a machine to perform tapping, usually more precise because human error is eliminated. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron and so on..
Check Stock