Categories

Best Steel Structural House

Lenox - 29232CLB72360 Classic Tuff Tooth Band Saw Blade, Bimetal, Regular Tooth, Wavy Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 18 TPI

  • Tuff tooth design reduces tooth strippage.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
  • Wavy tooth set helps prevent stripping for cutting thin workpieces.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
Check Stock

Lenox Classic Tuff Tooth Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 186\ Length, 3/4\ Width, 0.035\ Thick, 3 TPI

  • Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, tubular shapes, and structural shapes.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
  • Raker set for general-purpose cutting applications.
Check Stock

3M Panel Bonding Adhesive, 38315, 50 mL Cartridge

  • Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass).
  • A high performance two component epoxy adhesive..
  • Bonds a variety of steel, aluminum, SMC, and FRP (traditional fiberglass) non-structural components..
  • Also use to reinforce welded or riveted structural components..
  • Use with 08190 Performance Manual Applicator and 38191 Static Mixing Nozzle. The Net Fill amount is 47.5mL. Cartridge Volume is 50mL.
Check Stock

25 pcs M16-2.0 X 105mm DIN 6914 / ISO 7412 / EN 14399-4 Metric Heavy Structural Hex Bolts Class 10.9 Steel Galvanized

  • Heavy hex structural bolts are designed to withstand the load of a steel-to-steel connection..
  • Commonly used in structural steel joint in construction and building applications..
  • Class 10.9 steel is an alloy steel, quenched and tempered, with a minimum tensile strength of 1,040/mm-2 (Mpa)..
  • The washer face under the head provides a precision bearing surface..
  • The chamfered point improves engagement with a nut or pre-tapped hole..
Check Stock

USA Fleck 5600 SXT Metered On-demand 48,000 Grain Water Softener 1' Bypass USA Tanks

  • Fleck 5600 SXT Whole house water softener 48,000 Grain Capacity 1.5 cubic ft softener resin.
  • Efficient on salt and water consumption due to digital on demand metered water softener only back washes as needed..
  • 10 x 54 inch Structural Made in the USA black fiber glass mineral tank Structural black 14x34.
  • Fleck 5600 SXT metered on demand control valve A microprocessor control monitors, measures and remembers your actual daily conditioned water usage..
  • Noryl bypass with 1 inch male threaded yoke for easier installation Link to installation video sent via Amazon messenger upon shipment.
Check Stock

Lenox Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Wavy Set, Positive Rake, 93.5" Length, 1/2" Width, 0.025" Thick, 14-18 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design and smooth cuts.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Wavy set helps prevent stripping for cutting thin workpieces.
Check Stock

Lenox - 76123D2B51638 Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 18 TPI

  • Regular tooth design for general-purpose cutting.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
  • Flexible back is suitable for contoured cuts.
Check Stock

Lenox - 72100CLB72360 Classic Tuff Tooth Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 8-12 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
  • Vari-raker tooth set for multipurpose cutting applications.
Check Stock

Lenox - 80209D2B72390 Diemaster 2 Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 94\ Length, 1/2\ Width, 0.025\ Thick, 14 TPI

  • Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
Check Stock

Little Giant WX-3660-34 Welded Steel Workbench, 1 Lower Shelf, 15,000 lb. Load Capacity, 34\ x 60\ x 36\

  • Welded steel workbench with gray powder coat finish and 15,000 lb. total load capacity.
  • 7 gauge steel top with 3" x 1-1/2" support frame made of structural C channel for strength.
  • 12 gauge steel lower shelf with 500 lb. load capacity for storing items.
  • Legs made of 3" C channel and welded to the top with 7-gauge gussets for strength.
  • 4-1/2" clearance between floor and lower shelf to accommodate forklift fork.
  • 7 Gauge Steel Top Supported by a frame of 3" x 1-1/2" Structural C Channel.
Check Stock

Little Giant WX-4284-34 Welded Steel Workbench, 1 Lower Shelf, 15,000 lb. Load Capacity, 34\ x 84\ x 42\

  • Welded steel workbench with gray powder coat finish and 15,000 lb. total load capacity.
  • 7 gauge steel top with 3" x 1-1/2" support frame made of structural C channel for strength.
  • 12 gauge steel lower shelf with 500 lb. load capacity for storing items.
  • Legs made of 3" C channel and welded to the top with 7-gauge gussets for strength.
  • 4-1/2" clearance between floor and lower shelf to accommodate forklift fork.
  • 7 Gauge Steel Top Supported by a frame of 3" x 1-1/2" Structural C Channel.
Check Stock

Lenox - 80162D2B51640 Diemaster 2 Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 10-14 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design and smooth cuts.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Vari-raker tooth set for general-purpose cutting applications.
Check Stock

Culligan WH-HD200-C Whole House Heavy Duty 1\ Inlet/Outlet Filtration System

  • Whole house water filtration system with 1" stainless steel reinforced inlet/outlet connectors.
  • Perfect for residential homes, helps protect appliances and pluming from sediment and scale.
  • Features bypass shut off valve, integrated bracket design and battery operated filter change timer.
  • Reduces: sediment, rust, scale, dirt, coarse sand, sand, fine sand, silt, bad taste, odor, aesthetic chlorine taste and odor (depending on filter cartridge).
  • The WH-HD200-C housing has been tested and certified by WQA against NSF/ANSI 372 for low lead compliance, CSA B483.1 and NSF/ANSI 42 for material safety and structural integrity requirements only.
  • Includes: WR-HD housing wrench, mounting bracket, filter life monitor and filter monitor battery.
  • Compatible with Culligan filter cartridges: R50-BBSA, CW25-BBS, CP5-BBS, CW5-BBS, RFC-BBSA.
Check Stock