Categories

Best Steel Threaded Studs

POWERTEC QNB3010 5-Star Stud Knob, 1/4\-20, 2\ Long, 5 PK , Black

  • INCLUDES: 5-Star Knobs with 1/4”-20 Threaded Studs (pack of 5).
  • FUNCTION: Provides safe, secure hand-grip – allowing you to position, tighten or hold your equipment in place.
  • CONVENIENT: Perfect tool-less studded knob replacement fastener and an alternative to similar sized handles, or round knobs with projected studs.
  • APPLICATIONS: Ideal for heavy-duty clamping jobs, t-track assemblies, hand tools, feather boards, saw fences, drill press, woodworking jig making kits and fixtures.
  • PREMIUM DESIGN: Features a black, thermoplastic construction with a five star grip, matte black finish and a molded-in threaded stud engineered out of zinc plated steel.
Check Stock

(12 pcs) 1/2'-13 X 6', Threaded Rods, Full Thread, AISI 316 Stainless Steel

  • Threaded rods are relatively long studs, usually fully threaded, often used in tension applications..
  • Type 316 stainless steel is considered "marine grade"..
  • Stainless steel significantly improves resistance to tarnishing or corrosion..
  • ASTM F593 covers the chemical and mechanical requirements for 7 alloy groups of stainless fasteners..
Check Stock

Mostbest Head Stud Replacement Kit for SBC Cylinder Head Stud Set # 1525-Stud/ 279.1001

  • ❤️This kit has 14 long studs, 4 medium length, and 16 short studs..
  • ❤️ This listing is for the sbc head stud kit. We have used this kit on all of our sbc engine buildups, and the fitment is perfect. You will receive every stud needed to install both cylinder heads on your engine..
  • ❤️These head studs are made from aircraft quality 8740 high tensile strength chrome moly steel. They are twice as strong (190,000 psi steel alloy) as the stock head bolts. Kit that comes complete with 12 point hex nuts and washers. Very similar or rather identical in design and function to the ARP kits..
  • ❤️Studs make head installation a lot easier as the studs align the head and hold the head gasket in place.
  • ❤️ They clamp much better since the stud is loosely threaded into the block and the clamping torque is generated at the stud-nut interface rather than the block-bolt interface.
Check Stock

BodyJ4You Labret Studs Pack 4PC Surgical Steel 16 Gauge Barbell 8mm / 6mm Tragus Lip Piercing Jewelry

  • Value Pack 4 Pcs Internally Threaded Surgical Steel Labret/Monroe with Star Top.
  • Stainless Steel Gauge: 16G (1.2mm) Length: 5/16" (8mm).
  • You will receive 4 of Star Stainless steel Internally threaded 16 gauge labret/monroe/tragus.
  • 4 Pack of : Black, Silvertone, Rose Goldtone, Goldtone Value Pack High Polish Smooth Surface Body Jewelry Piercing Tragus Labret..
  • Labret Studs are a Great Choice for Tragus Earrings Because of The Smooth Back with Internally Threaded Rather Than a Ball That Screws on The Back Which Can Sometimes Uncomfortable..
Check Stock

Damaged Screw Extractor Set, 12Pcs Screw Extractor Kit, Easy Out Bolt Extractor Set and Drill Bits Guide Set for for Broken Bolts Removing Hand Tools, 4-25mm(1/8-1") Broken Screws

  • ...ctor: These extractors kit will remove most kinds of damaged, rusted, broken or stuck screws from any wood or metal surface. The easy-to-remove extractor set is made from premium steel, high temperature quenching, surface anti-rust treatment, strong and durable. Easily remove damaged or broken screws, bolts, studs, threaded pipe fittings and so on..
  • Damaged Screw Extractor: These extractors kit will remove most kinds of damaged, rusted, broken or stuck screws from any wood or metal surface. The easy-to-remove extractor set is made from premium steel, high temperature quenching, surface anti-rust treatment, strong and durable. Easily remove damaged or broken screws, bolts, studs, threaded pipe fittings and so on..
  • Must-Have Stripped Bolt Remover Tool: Portable ....
Check Stock

1/4-20 x 2 Thumb Screw Clamping Knob with Tee/Wing Butterfly Black Knob Thumb 10

  • THUMB SCREWS: Tee/Wing/Butterfly Thumb Screw 1/4"-20 x 2".
  • KNOB: Made of Delrin. Strong and Durable 1-1/4" in width.
  • STUDS: 18-8 Stainless Steel - anti-rust and anti-corrosion, strong and durable.Bolt is Partially Threaded. 1" threaded and 1" NOT threaded..
  • ORDER: Before 2:00 pm EST and Item Will Ship The Same Day!.
  • Manufactured in the USA and Shipped From the USA.
Check Stock

1 3/4 dia., 5/16-24 thds., Four Prong Plastic Knob Black Glossy Phenolic w/Blind Hole Brass Insert (1 Each)

  • INCLUDES: Black 4-Arm Knobs with 1/4”-20 Threaded Studs (pack of 5).
  • FUNCTION: Provides safe, secure hand-grip – allowing you to position, tighten or hold your equipment in place.
  • CONVENIENT: Perfect tool-less studded knob replacement fastener and an alternative to similar sized handles, or rounded knobs with projected studs.
  • APPLICATIONS: Ideal for heavy-duty clamping jobs, t-track assemblies, hand tools, feather boards, saw fences, drill press, woodworking jig making kits and fixtures.
  • PREMIUM DESIGN: Features a black, thermoplastic construction with ample finger grip spacing, a matte black finish and a molded-in threaded stud engineered out of zinc plated steel.
Check Stock

WoodRiver 1/4 x 20 tpi Jig Hardware Kit 149-piece

  • Kit includes assortment of 1/4" x 20 TPI threaded knobs, handles and inserts.
  • Steel plated studs and threaded inserts ensure reliable holding power.
  • Plastic molded knobs provide comfortable grip -.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....
Check Stock

The Hillman Group 47667 8 x 3-Inch Coarse Thread Drywall Screw Phillips Drive, Black

  • For use with drywall in interior applications.
  • Fine tipped screw and bugle head for a clean finish.
  • Phosphate coated for improved paint and mud adhesion.
  • User-friendly and easily gripped and held.
Check Stock

Candyfancy 16g 2/3/4mm Cubic Zirconia Triple Forward Helix Ear Cartilage Tragus Studs Earrings Lip Piercing 16 gauge (2mm stone, 6mm Length, 2pcs)

  • Cute & Tiny Piercing Earring Studs, Can Be Used As Ear Cartilage Piercing, Tragus Studs, Helix Studs, Triple Forward Helix Earrings..
  • Standard Design For Lip Piercing, Stone Jeweled, Flat Back, Perfect As Monroe Studs, Labret, Lip Piercing Ring Or Spider Bit Lip Studs..
  • 8mm Or 6mm Stud Length For Choose, 2mm, 3mm or 4mm Stone Size For Choose. The Triple Stone Size Pack Is Always The Classic And Popular Set For Earrings..
  • High Quality Cubic Zirconia Stone. 316l Surgical Steel Bar, Good For Those Who Are Sensitive To Other Metals..
  • Internal Threaded, Front Stone Unscrewed Off, But Not The Flat Back..
Check Stock

6 Pairs Screw Ball Backs and 6 Pairs Flat Backs Sugical Stainless Steel Earring Backings Replacement Hypoallergenic for 18/20G Threaded Post Screw Studs Earrings（Pack of 6)

  • 003eThe screw earring backs suitable for 18/20G piercings post stud earrings.***Earring backs metal: 316L sugical stainless steel, hypoallergenic for sensitive skin. Nickel free and lead free..
  • 003e4mm ball style screw earring backs: 3 Pairs 0.8mm for 20G and 3 Pairs 1.0mm for 18G threaded piercings post studs. 0.48g/pair lightweight screw backs.
  • 003e4mm*2mm flat style screw earring backs: 3 Pairs 0.8mm for 20G and 3 Pairs 1.0mm for 18G threaded piercings post studs. 0.38g/pair lightweight screw backs.
  • 003eThe stainless steel earring backings support have extremely strong and secure crip, Comfortable replacement screw earring backs to fit snug enough for most screw stud earrings..
  • 003e12 pairs earring backs come with a jewelry pouch for storage and giving. Sturdy pierced earring backs for nomal stud earrings..
Check Stock

10Pcs M8 x 250mm 304 Stainless Steel Fully Threaded Rods, Threaded Rods Bar Studs, Right Hand Thread Long Threaded Screw, M8-1.25 Thread Pitch, Fits for Anchor Bolts, Hangers, U-Bolts (5/16\ x 10\)

  • 【Quality Material】These m8 threaded rod made of 304 stainless steel, which provides excellent corrosion resistance and anti-rust ability for long service life.
  • 【Package Content】You will get valued 10 pack of 8mm x 250mm threaded rods.
  • The fully threaded rods & studs can be drilled, cut, heated and shaped.
  • 【All Threaded Rods】Our stainless steel thread rod can be used for assembly fastening, screw into threaded nuts or tapped holes, cut to your desired length.
  • 【Wide Application】These 5/16 x 10 inches threaded rods are suitable for a wide variety of applications, such as anchor bolt, clamps, hangers, U-bolts, weld projections, even model building and more projects.
Check Stock

Awclub Fully Threaded Rod, M6-1.0 Thread Pitch, 30mm Length 304 Stainless Steel Thread Bar Studs Rods, Right-Hand Threads 20pcs

  • Material: Made of high quality 304 stainless steel, excellent corrosion resistance and rust resistance.
  • All thread: Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • Applications: Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
  • What you get - 20Pcs x Stainless Steel Threaded Rod. If you have any question about this product, please feel free to contact us !.
Check Stock