Categories

Best Steel Valve Stems

Hromee Tire Valve Stem Tool Puller and Installer Kit, 4PCS TR413 Tubeless Snap-in Valve Stem with Valve Stem Cores, Single Head Valve Core Remover and Slotted-Head Valve Cap

  • ... designed with a off-set and pivoting head, more convenient and easier to use. There is the thread inside the swivel head for screwing into cap that makes you install and remove valve stems without removing the valve core. The pivoting head is for optimal angle..
  • PROTECTIVE DESIGN - On the handle part knurled finish steel is designed for increasing friction and ensure safety while using. The rubber bumper is for protecting wheel and rim from damage. 12.6-inches long to provide more leverage necessary to remove stubborn valve stems with less effort. This remover and installer definitely a good helper for changing the valve stem..
  • TR413 VALVE STEM - Snap-in rubber car tire valve stems for tubeless 0.453” (11.5mm) diameter rim holes. Outside EPDM rubber is for ozone resistance. Apply for 65 PSI max cold inflation pressure and max rim thickness of 0.156”. fits cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, and motorcycles..
  • Slotted-Head Valve Cap - 2 Pieces of valve remover caps are equipped in this kit. 2 in 1 valve caps are made of premium material, strong and durable to use. The top slot head can be used to remove valve cores and the bottom can be used as tire caps to prevent air leaking and dust. The little caps are made of hig....
Check Stock

Dr.Roc Tire Valve Stem Puller Tools Set –1 x Valve Stem Installer, 10 x Brass and Ozone Resistant EPDM Snap-in Tire Valve Stem with Valve Cores (6 x TR412,4 x TR413), 1 x Valve Core Remover

  • Valve Stem Puller-- For installation or removal of snap in type tubeless tire valves stems. Made of durable steel construction with soft rubber tube to protect wheels and rims from possible damage..
  • Premium Rubber Snap-in Valve Stems -- For safe tire system and safe driving. Constructed of brass and ozone resistant EPDM rubber. 100 percent leakage tested Providing safe tire system and safe driving..
  • Durable and Wide Tire Valve Core Remover - For quick removal or installation of tire valves cores. It is necessary tool to wring out the valve core when aerated or deflate the tire..
  • Widely use to repair tubeless tires for dirt bikes, sport bikes, motorcycles, ATV,UTV, lawn mowers, cars and trucks..
  • Package includes: 1* Valve Stem Installer, 6 * TR412 Valve Stems, 4 * TR413 Valve Stems, 1* Valve Core Remover..
Check Stock

Vaincre 4 PCS TR416 Metal Valve Stems, Tire Valve Stems, High Pressure Valve Stems Outer Mount Fits 0.453\ and 0.625\ Rim Hole, 1 1/2\ Long (Silver)

  • TR416 Metal Valve Stems - Valve Stem is used to keep the air in a tire. Tire valve stems should be inspected periodically for cracking, leaking or deterioration, and they should be replaced as needed. Vaincre metal valve stems can ensure no air loss occurs while driving the vehicle..
  • 2 Types of Diameter Rubber Grommet - Vaincre metal valve stem is suitable for tubeless tire which rim hole 0.453" or 0.625". Choose which one of the black rubber grommet you need. You only use ONE depending on the size of the valve stem hole in the wheel..
  • Material - The main part of the valve stems are made of nickel plated brass and the rubber grommets are made of EPDM rubber, making them resistant to rust and corrosion. Vaincre metal valve stems are tough enough to withstand inclement weather or long road trips..
  • Specifications - 4 pack TR416 metal valve stems, 1 1/2" inch Effective Length, maximum air pressure is 200 PSI. Complete size is 1.7" L x 0.75" W..
  • Standard Auto Metal Valve Stems - The valve stems are easy to install. Replace your valve stem whenever you get new tires to help ensure long tire life, provding safety driving..
Check Stock

CKAuto Valve Stem Puller/Installer with Rubber Boot

  • Durable steel construction with rubber overmold to protect wheels and rims from possible damage.
  • Off-set head designed to work with most aftermarket wheels and rims.
  • Head locks for easy installation and removal of valve stems.
  • 12.5-inches long to provide all the leverage necessary to remove stubborn valve stems.
  • Knurled handle provides a non-slip grip, this Valve Stem Removal/Installer Tool works on Dolly Tires, Lawn Mower Wheels, and Full Size Auto Rims.
Check Stock

Steelman Rubber Booted Valve Stem Puller/Installer Auto Tool, Off-Set Pivoting Head, Threaded Head, Non-Slip Grip

  • Rubber booted steel - durable steel construction with rubber over-mold to protect wheels and rims from possible damage.
  • Off-set and pivoting head - off-set and pivoting head is designed to work with most aftermarket wheels and rims.
  • Threaded head - swivel head screws onto cap thread for easy installation and removal of valve stems without having to remove the valve core.
  • Non-slip grip - handle is knurled on the end to provide a secure, non-slip grip.
  • Extra leverage - 12. 5-inches long to provide all the leverage necessary to remove stubborn valve stems.
Check Stock

Pacific Dualies 18000 7 Inch Braided Stainless Steel Valve Stem Extension System - Set of 2

  • Designed to fit 16", 17", and 19.5" applications with or without wheel simulators.
  • All hardware included with detailed instructions.
  • Do not install this product on top of rubber valve stems. Use with steel valve stems only.
Check Stock

Febrytold Tire Valve Stem Tool Remover & Installation 6 Pcs TR412 Snap-in Valve Stems with Valve Stem Cores 1 Pcs Single Head Tire Valve Core Remover Installer Tool 14 Pcs

  • 【Advantages】The tool sets easy to carry and use. Quickly remove or install the the tire valve..
  • 【Installation】Pull out the old valve stems and re-install the new valve stems, No need to worry scratching wheels or destroying valve stems..
  • 【Function】Works with any wheel that uses a standard 0.453" valve stem stem..
  • 【Compatible】Suitable for repair of tubeless tires for passenger cars, motorcycles, ATVs, off-road vehicles and trucks..
  • 【Package】1 Pcs Valve Stem Puller Installer Tool.
  • 6 Pcs TR412 Valve Stems with 6 Pcs Valve Stem Cores.
  • 1 Pcs Single Head Valve Core Tool (14 Pcs).
Check Stock

Tire Supply TR-572 Brass Commercial 3-3/4 Valve Stem (10)

  • Snap-In Tubeless Valve Stem – Created as a Schrader replacement these black tire valve stems can be installed into any standard wheel seamlessly using and let you add a replacement tire valve core effortlessly with a core remover tool..
  • Leak-Resistant, Road-Ready Design – The heavy-duty rubber is weather resistant, strong enough to stand up to on- and off-road adventures and won’t leak air or retain moisture even during intense climate or environmental changes..
  • Rust-Resistant Brass Tip – Each TR-413 tire valve stem is fitted with a high-quality brass fitting that allows you to safely secure a tire valve stem cap. It also allows for better air flow when you’re filling up tires or checking tire pressure..
  • Optimal Stem Valve Length – Valve-Loc valve stems for tires are 1.25” in length and fit wheel hole diameters of 0.453” to ensure they can fit a wide range of common cars, trucks, SUVs, RVs, outdoor recreational vehicles and other standard-sized wheels..
  • Complete Black 4-Pack – Every order comes with four individual snap-in, tubeless tire valve stems to make it easier to swap out one at a time as needed, or to replace all stems on your vehicle at once. They’re also backed by our unbeatable service!.
Check Stock

CKAuto TR415 Tubeless Rubber Snap-in Tire Valve Stem (50pcs/Bag), Black

  • High Quality: TR415 tire valve stems are constructed of high temperature brass valve cores and ozone resistant EPDM rubber,100% Ozone tested and leak tested.
  • Various Application: Snap-in valve stems for tubeless 0.625” (16mm) diameter rim holes, U.S. standard,providing safe tire system and safe driving, up to 65 PSI cold pressure per industry standard, durable and practical.
  • Easy To Install: with bolt-in design, these rubber tire valve stems are very easy and convenient to install,keep your tires inflated at a steady air pressure level and easily check PSI quickly.
  • Universal Rubber Stem: Valve stems are a standard diameter and fit for most passenger car & light trucks with tubeless tire valves.
  • Dimension： 46 x 24mm/1.81x0.94 inch(L*D).
  • (Pack of 50) Valve Stem 5/8" Rubber - TR415.
Check Stock

Pacific Dualies 18100 Max EZ Air 7-Inch Braided Stainless Steel Valve Stem Extension Kit for 16-19.5-Inch Dually Rear Inner Wheel

  • Designed to fit 16", 17", and 19.5" applications with or without wheel simulators.
  • All hardware included with detailed instructions.
  • Do not install this product on top of rubber valve stems. Use with steel valve stems only.
Check Stock

CKAuto TR412 Rubber Snap-in Short Black Tire Valve Stem for Tubeless 0.453 Inch 11.5mm Rim Holes on Standard Vehicle Tires (50pcs/Bag)

  • High Quality: TR412 tire valve stems are constructed of high temperature brass valve cores and ozone resistant EPDM rubber,100% Ozone tested and leak tested.
  • Various Application: Snap-in valve stems for tubeless 0.453” (11.5mm) diameter rim holes, U.S. standard,providing safe tire system and safe driving, up to 65 PSI cold pressure per industry standard, durable and practical.
  • Easy To Install: with bolt-in design, these rubber tire valve stems are very easy and convenient to install,keep your tires inflated at a steady air pressure level and easily check PSI quickly.
  • Universal Rubber Stem: Valve stems are a standard diameter and fit for Cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, motorcycles.
  • Specification: CKAuto Brand Premium TR412 Rubber Snap-in Valve Stem ,Hole Diameter in Wheel:0.453 inches(11.5mm), Package Content: 50 x TR412 Tire Valve Stem.
Check Stock

CKAuto TR412 Rubber Snap-in Short Black Tire Valve Stem for Tubeless 0.453 Inch 11.5mm Rim Holes on Standard Vehicle Tires (5pcs/Bag)

  • High Quality: TR412 tire valve stems are constructed of high temperature brass valve cores and ozone resistant EPDM rubber,100% Ozone tested and leak tested.
  • Various Application: Snap-in valve stems for tubeless 0.453” (11.5mm) diameter rim holes, U.S. standard,providing safe tire system and safe driving, up to 65 PSI cold pressure per industry standard, durable and practical.
  • Easy To Install: with bolt-in design, these rubber tire valve stems are very easy and convenient to install, keep your tires inflated at a steady air pressure level and easily check PSI quickly.
  • Universal Rubber Stem: Valve stems are a standard diameter and fit for Cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, motorcycles.
  • Specification: CKAuto Brand Premium TR412 Rubber Snap-in Valve Stem ,Hole Diameter in Wheel:0.453 inches(11.5mm), Package Content: 5 x TR412 Tire Valve Stem.
Check Stock

Swpeet 65Pcs Tire Valve Stem Tool Remover & Installation Set, Valve Caps Snap-in Valve Stems with Valve Stem Cores, Single and Dual Head Tire Valve Core Remover Tool, 4-Way Valve Tool for Most Cars

  • 【 What You Get】------ In this kit, You will get 65Pcs Tire Valve Stem Tool Remover & Installation Set. Including 30Pcs valve core(golden, silver).
  • 10 pcs slotted-head valve covers 1 pcs 4-ways valve tool.
  • 1 Pcs Dual Head Valve Core Remover. Suitable for all standard valve cores..
  • 【 Tire Valve Caps and Valve Core Seal Kit】 ----- Universal Tire Stem Valve Caps – These dust covers for wheels help keep tires inflated at the proper level on bikes, cars, SUVs, trucks, and other motor vehicles. Each car tire valve cap also has grips around each dome shape to make it easier to grab and tighten it with your fingers on the fly..
  • 【 Valve Installation and Removal Tool Kit 】------ Dual and Single Head Valve Core Remover: Handy tool designed to remove and install standard valve cores more simple and quick.Made of plastic,and metal, light weight, easily carry.☆4 way valve tool: Multifunction- Great for remove / install valve cores.
  • Re-threading and cleaning inside & outside threads.
  • Remove small stone.Perfect one for removing old leaky or faulty valve stems..
Check Stock