Categories

Best Steel Waterjet Cutting Machine

Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max Cutting Thickness 8mm (CUT35 110V)

  • ✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine..
  • ✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 8mm in 110V 60PSI Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!.
  • ✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal..
  • ✤ The plasma cutter easy to cut stainless steel, Alloy steel, mild steel, Copper etc. Quality cutting torch PT31 come with machine, Max cutting thickness is 10mm at 40Amps 110V 60PSI..
  • ✤ Machine come with 110V power plug, We provide three years warranty for this unit..
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

Warfox Plasma Cutter 120/240V Dual Voltage Plasma Cutting Machine, Max Cutting Thickness 14mm, Clean Cutting Thickness 10mm in 65PSI (CUT50D 120/240V)

  • Plasma Cutter, 120V/240V 50A plasma cutter with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • Plasma cutting machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumable's working life.
  • Max cutting thickness 14mm ,10mm quality cutting thickness in 240v@65PSI 50A.
  • Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm.
  • Accessories included:4M PT31 cutting torch, 2.5M Earth clamp,5pcs tips, 5pcs electrodes, 2 meters air hose, 4pcs hose clamp, 1adaptor, 1 manual.Air regulator,air filter,air gauge are fixed at machine.
  • The cutting machine can cut carbon steel, stainless steel, steel and other materials. It is an indispensable machine in your tool room.
Check Stock

Biltek Plasma Cutter 50A Dual Voltage 110V/220V Cutting Torch Kit, 1/2 Inch, IGBT Technology, Portable Plasma Cutter Machine, Metal Cutter for Steel, Copper, Aluminum, Brass, Other Metals + 250V Plug

  • [DEEP CUTTING CAPACITY & FAST SPEED CUT] Our Re-Engineered High-Performance Plasma Cutter is So Robust, It Can Cut Up To 1/2" Inch Of Thick Steel ! Optimal Cut: 8mm Thick Steel, Max Rated Clean Cut Thickness Cut: 12mm Thick Steel (at 35A 110V 60 PSI), Maximum Severance Cut: 14mm Thick Steel (at 50A 220V 70 PSI) With Cutting Speeds Exceeding 100 Inches Per Minute Our Plasma Cutting Machine Is Extremely Fast.
  • Making It The Most Efficient Way To Cut Metal At Home Or For DIY Hobby Projects..
  • [CUTS LARGE VARIETY OF METALS] Our Plasma Cutter Uses High-Velocity Ionized Gas To Create a Flame Making it Capable of Cutting Any Electrically Conductive Metal Like: Mild Steel, Stainless Steel, Carbon Steel, Expanded Steel, Aluminum, Copper, Brass and Other Ferrous (Iron-Containing) And Non-Ferrous Materials. A Must-Have Home Improvement Machine! Not Only Can You Cut Metal, You Can Also Bevel, Gouge, Mark, And Even Weld! No Other Tool In Your Metalworking Arsenal Is So Flexible..
  • [AUTOMATIC DUAL VOLTAGE- 110/220V [50/60 Hz] The Plasma Cutting Equipment Comes With A Pre-Attached 110V Plug That Can Be Switched With a 220V Plug (Included) for Even More Cutting Power! Connect....
Check Stock

Dynaloop Plasma Cutter 50Amps, Dual Voltage 110V 220V Plasma Cutter Machine, 8-10mm Cutting Thickness,16Pcs Plasma Cutting Equipment (DC500D 110V220V)

  • 【Inverter plasma cutter】： DC500D has the function of Inverter technology high frequency arc initiation（50/60HZ）. This plasma cutter needs to touch the workpiece to arc, we suggest pilot arc function If you don't like to touch metal to arc..
  • 【Automatic voltage detection】：Plasma cutting machine can adapt to dual-voltage, whether access 110V or 220V circuit can be automatically identified, and displayed on the front panel, no manual adjustment..
  • 【Air Filter Pressure Regulator Combo】：Plasma cutting machines cut materials by compressing gas(Oxygen,air, inert and others depending on material being cut ), Air regulator inside the machine can lower or maintain air pressure and filter moisture and fine particles from the air to reach effective cutting..
  • 【Cutting Thickness】The plasma cutting machine can cut different thicknesses under different voltages. ✨110V: 35A, 30-50PSI (Quality cutting thickness is 6mm#60PSI(0.6Mpa).
  • Max cutting thickness is 10mm#60PSI( 0.6Mpa)).
  • ✨220V: 50A, 30-70PSI(Quality cutting thickness is 10mm#65PSI(0.65Mpa), Max cutting thickness 14mm#65PSI(0.6Mpa))..
  • 【Portable & Multi-purpose】20lb cutting machine can be carried anywhere to cut workpiece, suitable for cutting stainless steel, alloy steel, low ca....
Check Stock

Plasma Cutter, HeroCut 45i, 110 Voltage IGBT Inverter Air Plasma Cutter 6mm Clean Cut, 10mm Severance Cut In 70PSI (CUT45i 110v)40A or 63A Power Breaker is suggested

  • Plasma Cutter Input Voltage 110V, 60Amps Power breaker is suggested. 40Amps cutting current,High frequency arc starting, Quality cutting thickness 6mm, Severance cutting thickness [email protected] 40Amps.
  • Very compact design, Adopt Latest IGBT inverter technology, Easy cut stainless steel, Alloy Steel, Mild Steel, Thin Copper, Aluminum, It is High Frequency Arc Starting. 1 year warranty for machine..
  • Input voltage is 110V 50/60Hz, 60Amps Power breaker is suggested. Machine maybe explode if plug it to 220V, Make sure you fix machine to correct voltage, Better use 60Amps power breaker for this machine..
  • 40Amps output, Duty cycle 60% in 40Amps, 100% in 35Amps, Air pressure range from 40-70PSI, Maybe the cutting arc not stable if the air less or over the range..
  • We supply high quality machine, very lightweight but powerful, Very easy to carry, Machine come with quality accessories and torch parts, Easy cut stainless steel, Alloy Steel, Mild Steel, Thin Copper, Aluminum. ( search torch consumables at amazon ASIN: B08BCLNL5B ).
Check Stock

PMRACKS KLX250S KLX300 Rear Luggage Rack (2009-Present) Kawasaki KLX 250S KLX 300 KLX300SM 300SM 2013 2014 2015 2016 2017 2018 2019 2020 2021 Cargo Carrier

  • FITS: Rear rack for KLX250S and KLX300 (2009-Present).
  • RUGGED: steel construction. Professionally Mig welded single tube frame design..
  • STAINLESS STEEL: installation hardware included..
  • VIDEO SUPPORT: install video online and paper instructions included with order..
  • ORIGINAL: cnc waterjet design. Sleek lines. Often imitated. Never duplicated..
  • POWDERCOAT: thick, lightly textured industrial grade powdercoat. No poor quality coatings like the other guys..
  • FREE: PMRACKS logo sticker with every order.
  • LIFETIME WARRANTY: Bend it or break it, the new one is on us!.
Check Stock

DIYAREA 850W Commercial Meat Saw Bone Cutter 19.1'x14.2' Workbench for Butchering, 110V 1.2HP Butcher Bandsaw Electric Frozen Meat Cutting Machine with 4 Sawing Blade

  • Superior Material: The electric bone cutting machine is made of cast aluminum body and 304 stainless steel workbench, It is much more durable, rustproof, corrosion-resistant, and easy to clean. 850W powerful motor for our frozen meat cutting machine with pure copper material, lower noise, high efficiency.
  • Large Area Workbench: The DIYAREA 304 stainless steel workbench is 19.1"x14.2"), which can provide sufficient cutting space. It comes with 2 different sizes of saw blades for this electric bone saw machine, 4mm and 6mm to meet your needs. Additional blades are sold separately, please contact us if needed.
  • Accurate Cutting: Precision scale on the 304 stainless steel worktable, can adjust the cutting thickness according to your needs. Adjust the Knob to adjust the cutting thickness.
  • Easy and Safe to Operate: Two side blades on the push board make your cutting easier and safer, the safety handle design makes you away from sharp blades.
  • Wide Application: This 850w commercial bone saw machine can cut large-sized meat products like frozen meat, frozen fish, pork ribs.....etc. it is widely used in home kitchens, butchers, guesthouses, hotels, food processing factories, and slaughterhouse.
Check Stock

ALUMINUM WELDING: A COMPLETE GUIDE TO ALUMINUM WELDING

  • 1.【Body Material】This torch track gas cutting machine is made of high-strength aluminum ingot material, precision die-casting, reasonable structural design and good walking stability. It features light and compact in structure, as ideal portable machine..
  • 2.【Application】This machine is suitable for factories such as shipbuilding, machinery, steel structure, construction and other industries. Also suitable for other large, medium and small enterprises to cut steel..
  • 3.【Tech Parameters】Cutting Speed: 6"-31.4" (150-800 mm) /min.
  • Cutting Thickness: 0.23"-4" (6-100 mm) (by standard accessories). Grove range: I.Y.V(45°). Tracks: about 6'(1.8m)..
  • 4.【Advanced Design】The speed control series adopts mechanical speed regulation, which greatly reduces the influence of high temperature and humidity during cutting. And it adopts imported AC motor and has its own cooling fan, which has the characteristics of continuous operation under high heat conditions..
  • 5.【Detailed Instructions】This machine comes wi....
Check Stock

DIYAREA 850W Commercial Meat Saw Bone Cutter 19.1'x14.2' Workbench for Butchering, 110V 1.2HP Butcher Bandsaw Electric Frozen Meat Cutting Machine with 4 Sawing Blades Cutting Height 200mm

  • [Large Area Workbench] - The DIYAREA 304 stainless steel workbench reaches up to 19.1"x14.2", which can provide sufficient cutting space. It comes with 2 different sizes of saw blades for this electric bone saw machine, 4mm and 6mm to meet your needs. Asin of the extra blades: B09VNNPSF3.
  • [Superior Material] - The electric bone cutting machine is made of cast aluminum body and 304 stainless steel workbench, It is much more durable, rustproof, corrosion-resistant, and easy to clean. 850W powerful motor for our frozen meat cutting machine with pure copper material, lower noise, high efficiency.
  • [Accurate Cutting] - Precision scale on the 304 stainless steel worktable, can adjust the cutting thickness according to your needs. Adjust the Knob to adjust the cutting thickness.
  • [Simple and safe operation] - Two side blades on the push board make your cutting easier and safer, the safety handle design makes you away from sharp blades.
  • [Wide Application] - This 850w commercial bone saw machine can cut large-sized meat products like frozen meat, frozen fish, pork ribs.....etc. it is widely used in home kitchens, butchers, guesthouses, hotels, food processing factories, and slaughterhouse.
Check Stock

50Amp Plasma Cutter Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110/220V CUT55P 50A Plasma Cutting Equipment, DC Inverter Portable Plasma Cutter Machine, IGBT Digital Display 1/2 Inch Clean Cut

  • Pilot arc: our cut55p is pilot arc plasma cutter machine and equipment the P-80 plasma cutting torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag.
  • Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life..
  • Outstanding cutting performance: the DC inverter cutting machine suitable for cut stainless steel, alloy steel, mild steel, copper, and aluminum. Designed for both demanding DIY and outdoor work, or home and hobby use..
  • Equipped with IGBT technology: IGBT transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. IGBT machine is far superior and more stable than the MOSFET machine. Can effectively save 30% of energy..
  • 12mm Cutting thickness: Ideal cut thickness 1/2" (12mm), automatic dual voltage / dual frequency (110V/220V 50/60Hz). Voltage compensation to tackle with +/-15% electricity fluctuation. In addition our machines provide plugs that require manual installation..
  • What you get: cut55p x1, p80 plasma torch & accessories, user guide, 12 month guarantee..
Check Stock

K Nakasaki 78cc NK-78 Red Gasoline Chainsaw + Extra Chain + Accessories Kit / Heavy Duty High Power Gasoline Chainsaw, Tree Cutter

  • FIREWOOD CUTTING MACHINE: 78cc 20-Inch 3.5hp 2-stroke is efficient, practical and perfect to keep your garden or outdoor plantation in top condition. High quality forged parts. Promoting power and toughness for high cutting efficiency create diversity when tackling the outdoor job and absolute value for money..
  • HIGH - QUALITY MATERIAL: The steel razor updated cutting machine head is made of high-quality stainless steel material, sturdy and durable, providing a long-life service. 5 in 1 blades are high hardness, sharper, durable, and have double-sided cutting edges. The chainsaw is coated with a high quality material which adds to your safety. High machine life + complete machine repair kit..
  • HIGH - STRENGTH TOOLS: The long reach gasoline chainsaw is the ideal tool to cutting wood, it has a multi-positional head anti-slip allow you to keep the machine in well balance easily and adjustable shoulder strap decreases operator fatigue during use w....
Check Stock

Glass Cutter Head for CNC Machine,2 Pcs Tungsten Steel Cutting Wheel Replacement Cutter Head,Automatic Lathe Glass Cutter Replacement Knife Head for Cutting Most Glass Mirror Material

  • Sharp Tungsten Steel Wheel：Replacement Cutter Head for CNC Glass Cutting Machine is made of high-quality sharp and durable tungsten steel with stainless steel bracket.high hardness and not easy to crack..
  • High Carbon Steel Gasket：Glass cutter head with widened and thickened high carbon steel gasket, has good stability and safer operation..
  • Alloy Cutter Shaft：Bold alloy cutter shaft is firm and strong, rolling smoothly, smooth cutting, and more flexible when cutting glass..
  • Easy Identification：Laser engraving cutter head Degree for easy identification,easy to replace and install.
  • Application Scenarios：Glass cutting wheel perfect for cutting most glass mirror material,Glass cutter tools for machine use only,Do not cut manually.
Check Stock