Categories

Best Steel Weight Plate

Balelinko Extended 9' Olympic Weight Plate Holder, Weight Plate Storage, Attachment for for 2'x2' Tube Power Cage with 1' Hole, 1 Pair, Bonus a Pair of 2' Spring Clip Collars Rings

  • BE USED WITH: Balelinko 9" extra long Weight Plate Holder can be easy to install and fit most power cages with 2" x 2" steel tubes with a 1" Hole. 2 inch diameter for Olympic weight plates, and 2 FREE spring clips included for securing weight plates. Heavy duty design up to 250 lbs per plate holder weight capacity and the total set can hold 500 lbs..
  • STRONG CONSTRUCTION: Balelinko Weight Plate Holder is made of solid stainless steel with black powder-coated to prevent item from being corrosive, rusty or broken apart and extend the age after a long time using..
  • SAVE YOUR SPACE: : This pair of weight plate holders is the perfect alternative for bulky & space-consuming weight plate trees. Sleeve length is up to 9”, extra-long so you can have more room to put your weight plates. The holders are especially perfect for home gym, garage gym, or commercial fitness facilities with a small space..
  • EASY TO USE: Easy to insert and lock-in design, just slide pin into power rack's hole and swing down to lock in place. This smart design makes it more convenient for loading and unloading the weight plates..
  • PURCHASE IN ASSURANCE - Note: Balelinko Olympic Weight Plate Holder Bonus a Pair of FREE Spring Clip Collars Rings, does not fit Power Cage (3"x2"). 1-year limited....
Check Stock

Yaheetech 2 Inch Olympic Plates Tree Stand Black Weight Plates & Bars Organizer Strength Training Plate Storage Racks

  • 【Made for sturdiness】Constructed of powdered-coated steel with a high load capacity of up to 400kg/882pounds, this weight plate and bar rack is strong enough to store your weight plates and barbell bars..
  • 【Safer & Wiser storage solution】Stacking and pilling the weight plates and bars upon this vertical weight plate holder will effectively reduce the chances of getting tripped or bumped by the scattered equipment on the floor..
  • 【Wear-resistant finish】This weight plate tree stand applies an extra protective layer of wear-resistant finish on each peg to prolong the lifespan..
  • 【Home gym basic equipment】Weight plates and bars are the most basic and cost-effective home gym equipment for both beginners and professionals. Therefore, a practical and space-saving storage rack for weight plates and bars is a rather necessary home gym investment..
  • Overall dimensions: 24.5” W x 27” D x 54.5’’ H.
Check Stock

UNKLE METAL Strength Training Plate Trees Wall Mounted Weight Storage Space Saving, Olympic Bumper Plate Weight Rack Storage, Perfect Garage Home Gym Strength Training (4-Peg and 2-Weight Wing)

  • [Design] - This weight plate storage rack assembly size is 21.65 "long x 81.28 "high.
  • each column can be stored Two 45-pounds of the bumper or 4 45 pounds of cast iron plates.
  • [Rugged] - Durable steel structure plus black powder layer provides durable, rugged shelves for your weight plate, and the durable surface coating of this weight plate storage wall mount can effectively resist scratches and minimize weight reduction The wear of the board ensures long-term safety use.
  • the width is 2 " weight nails suitable for any standard Olympic size weight plate, barbell, insurance barboard or cast iron plate.
  • [Save space] - Different from the traditional design, this Bumper Plate Weight Rack can save a large amount of space and footprint, no counterweight plate or barbell.
  • [Easy to assemble] - just use a spliced screw, and only from the wall extends 8 inches, you can fix this Bumper Plate Weight Rack Storage to your wall, open a happy fitness journey, Have a healthier body. Complete Plate Weight Rack and mounting accessories in parcels.
  • [Application is wide] - This Weight Plate Rack can be installed in your garage, home gym, living room, balcony, courtyard or light commercial gym.
Check Stock

HulkFit Pro Series 2.35” x 2.35” Weight Plate Holders Attachment Accessory Pro Series Power Cage - Pair

  • Purpose - Add Weight Plate Holders as an accessory for the 2.35” x 2.35” upright poles on the Pro Series Power Cage. Our Weight Plate Holders hold....
  • Usage - Find the correct height you want to use the Weight Plate Holders during weight training sessions. Simply slide through the upright poles and....
  • Materials - Black powder coated steel with felt pad. What’s Inside - (2) Weight Plate Holders.
  • Please ensure to insert the peg at the rear of the attachment and turn down to lock in place.
  • Product Specifications - Total Dimensions 11.75” x 3.1” x 5.9”, Weight Plate Holding Surface Area 8.5” x 2” Diameter, and Attachment Bracket....
Check Stock

RitFit Olympic Weight Bench Press Station with Barbell Rack，15LB Olympic Weight Plates， 7 FT Olympic Barbell Bar Strength Training Workout for Gym and Home

  • Package Included: Olympic Weight Bench Press Station * 1, 7 FT 500 LB Olympic Barbell Bar * 1, 15 LB Rubber Olympic Weight Plates * 2,Free Collars *2..
  • Bench Press Feature: The RitFit flat bench press station is made of high-grade commercial steel, ensuring 100% stable. 2 height choices meet different people with long arm, short arm, or the length between the two.4 plate holders to help store barbell pieces. Weight capacity: 1100 lbs for the barbell racks, 880 lbs for the plate holders, and 660lbs for the bench..
  • Barbell Feature: Built to the highest standard using high-quality steel materials, barbells feature. The Volcano knurling type on the grip provides enough friction to grip. All the 2 inch weight plates are suitable for thr bar..
  • Weight Plates: Made of 100% High-Density Natural Rubber. The material avoid noise and keep low rebound that protect the floor and bar. The UV Printed Fonts on the surface is wear-resistant than others. The bumper plate has a solid steel core with sufficient weight.-inch bar diameter and 17.5 inch bumper plate diamete..
  • The RitFit bench press set can accommodate all kinds of workouts, exercise your muscles and enhances your body strength, is perfect for commercial or home gym, is a great choice for you..
Check Stock

Yes4All Wall Mounted Weight Plate Holder - Fit 2inch Olympic Weight Plates Protective Rubber Pad Single

  • HEAVY GAUGE STEEL CONSTRUCTION: Made of solid stainless steel, Yes4All Wall Mounted Weight Plate Holders can support up to 550lbs of weight per pair and will last for a long time, ensuring your weight plates are safely stored off the floor.
  • SPACE-SAVING WALL MOUNT DESIGN: Our wall mounted weight plate holder is a cost-effective, space-efficient alternative for the bulky weight plate trees and racks. Comes with all mounting hardware for your comfort.
  • ANGLED LOADING PIN: The loading pin forms a slight incline angle with the wall when mounted, making use of gravity for safer board storage and extra durability. It is at 9” long and 1.9” in diameter, perfect for 2” Olympic weight plates.
  • PROTECTIVE RUBBER PAD: Also included is a rubber padding at the end of the loading pin to protect the stored weight plates from scratches and unnecessary damage as you slide them into the pin.
Check Stock

PRx Performance Profile Weight Plate Storage 3-Peg or 4-Peg Wall-mounted weight plate storage perfect for any garage, home or commercial gym (4-Peg Storage + Weight Wing)

  • PICK YOUR SIZE: See below for the differences in size..
  • WEIGHT PEGS: 2" weight pegs will fit any standard olympic sized weight plate. Olympic cast iron, solid rubber, crumb rubber, urethane, and competition plates will all fit on this weight plate storage. 8" long weight storage pegs are heavy duty USA steel with a thick wall plate and welds allow you to store up to two 45lb thick bumper plates or 4 45lbs cast iron plates on each peg..
  • SPACE SAVING: Taking up only 1 wall stud and and sticking out 8" this weight plate storage takes up little space in you home gym. Add this to your home garage gym to store plate without sacrificing your floor space..
  • MADE IN THE USA: Manufactured and powder coated in the USA. Made of Steel and Powder Coated Black Onyx. PRx has overbuilt the strength capacity of this product to ensure safety. Mounting hardware and installation instructions included. Simply use supplied screws to secure to your wall stud..
  • THE BRAND: PRx Performance is a high quality brand in the fitness industry. We strive for the highest of quality products along with ....
Check Stock

Philosophy Gym Set of 2 Rubber Coated 2-inch Olympic Grip Weight Plates 10 LB each for Weightlifting

  • Universal Olympic weight plate: Rubber coated weight plates from Philosophy Gym are made for heavy-duty use with barbells. Perfect for home use, these weights can be stacked to meet your desired level of lifting weight..
  • Versatile design: Designed for convenient weightlifting. The simple, dynamic design of these Olympic weight plates features 2” stainless steel inserts for use with a wide range of Olympic bars and 2” barbells..
  • 10 lb weight: Made for long-lasting use and excellent performance for years to come. Each weight plate is 10 lbs, allowing you to use them individually or combined to help you maximize your workouts and reach your lifting goals.
  • Durable construction: Each weight plate is a solid stainless steel flange ring, coated in high-strength natural rubber for protection from rust, superior handling, a secure grip, as well as protection for surfaces and floors during lifts and drops..
  • Excellent for all-around fitness: For strength training, building endurance, bodybuilding, flexibility, and balance training, these Olympic weight plates can be used in so many ways. This makes them perfect for home gym use..
Check Stock

Philosophy Gym Set of 2 Rubber Coated 2-inch Olympic Grip Weight Plates (45 LB each) for Weightlifting

  • Universal Olympic weight plate: Rubber coated weight plates from Philosophy Gym are made for heavy-duty use with barbells. Perfect for home use, these weights can be stacked to meet your desired level of lifting weight..
  • Versatile design: Designed for convenient weightlifting. The simple, dynamic design of these Olympic weight plates features 2” stainless steel inserts for use with a wide range of Olympic bars and 2” barbells..
  • 45 lb weight: Made for long-lasting use and excellent performance for years to come. Each weight plate is 45 lbs, allowing you to use them individually or combined to help you maximize your workouts and reach your lifting goals.
  • Durable construction: Each weight plate is a solid stainless steel flange ring, coated in high-strength natural rubber for protection from rust, superior handling, a secure grip, as well as protection for surfaces and floors during lifts and drops..
  • Excellent for all-around fitness: For strength training, building endurance, bodybuilding, flexibility, and balance training, these Olympic weight plates can be used in so many ways. This makes them perfect for home gym use..
Check Stock

Philosophy Gym Set of 2 Rubber Coated 2-inch Olympic Grip Weight Plates (25 LB each) for Weightlifting

  • Universal Olympic weight plate: Rubber coated weight plates from Philosophy Gym are made for heavy-duty use with barbells. Perfect for home use, these weights can be stacked to meet your desired level of lifting weight..
  • Versatile design: Designed for convenient weightlifting. The simple, dynamic design of these Olympic weight plates features 2” stainless steel inserts for use with a wide range of Olympic bars and 2” barbells..
  • 25 lb weight: Made for long-lasting use and excellent performance for years to come. Each weight plate is 25 lbs, allowing you to use them individually or combined to help you maximize your workouts and reach your lifting goals.
  • Durable construction: Each weight plate is a solid stainless steel flange ring, coated in high-strength natural rubber for protection from rust, superior handling, a secure grip, as well as protection for surfaces and floors during lifts and drops..
  • Excellent for all-around fitness: For strength training, building endurance, bodybuilding, flexibility, and balance training, these Olympic weight plates can be used in so many ways. This makes them perfect for home gym use..
Check Stock

PRx Performance Profile Weight Plate Storage 3-Peg or 4-Peg, Optional Weight Wing Extension. Wall-Mounted Weight Plate Storage Perfect for Any Garage, Home or Commercial Gym (3-Peg Storage)

  • 8" PEGS: Heavy duty USA steel with a thick wall plate and welds allow you to store up to two 45lb thick bumper plates or 4 45lbs cast iron plates on each peg..
  • PEG WIDTH: 2" weight pegs will fit any standard olympic sized weight plate. Olympic cast iron, solid rubber, crumb rubber, urethane, and competition plates will all fit on this weight plate storage..
  • SPACE SAVING: Taking up only 1 wall stud and and sticking out 8" this weight plate storage takes up little space in you home gym. Add this to your home garage gym to store plate without sacrificing your floor space..
  • BUILT STRONG: Manufactured and powder coated in the USA. Made of Steel and Powder Coated Black Onyx. PRx has overbuilt the strength capacity of this product to ensure safety..
  • EASY TO ASSEMBLE: Mounting hardware and installation instructions included. Simply use supplied screws to secure to your wall stud..
Check Stock

Fitness Reality Extended 9\ Olympic Weight Plate Holder for 2\x2\ Tube Power Cage

  • 9" long extended weight plate holder shaft which is 1" longer than most of other weight holders.
  • Heavy duty design up to 250 pounds per plate holder weight capacity. 2 inch diameter for Olympic weight plates.
  • 2 spring clips included for securing weight plates. Chrome plated surface for smooth racking and un-racking.
  • Easy to insert and lock-in design. Comes with 2 weight plate holders.
  • Fits most power cages with 2" x 2" steel tubes with a 1" Hole. Note: Does not fit Fitness Reality X-Class Power Cage (3"x2"). 1 year limited warranty.
Check Stock

Doeplex Olympic Weight Plate Holder Power Rack Attachment for 2x2 inch Power Rack - Fit 2\ Olympic Weight Plates

  • 【Save Space】When your room space is limited, it may be difficult to organize the weight plate. The olympic weight plate holder will help you keep your home gym clean and save space while protecting your weights and equipment..
  • 【Easy to use】This weightlifting board bracket is easy to insert and lock. Just slide the pin into the hole in the barbell frame and swing it down to lock it in place. Pretty sturdy on your power cage. Strong bearing capacity, very suitable for home / gym squat racks..
  • 【High Duty】This olympic weight plate holder power rack is made of sturdy steel, the rigid steel ensures that your weight plates are stored safely.Please note that this product can not be touched with water for a long time. Always wipe it with dry towel to keep it dry to prevent rust and affect its use..
  • 【Extra Long】 Dimension：13.3” * 5.1” * 2”. This olympic weight plate holder power rack attachment fits most power cages with 2” x 2” tube (with 1" holes). The length of 13 inches can hold multiple barbell weight plates..
  • 【Warm Notice】Please confirm your size before buy！！ Designed to fit 2" x 2” square tube power racks with 1” hole & 2 “diameter. The welding part of the side will be slightly uneven, but it will not affect the use....
Check Stock