T-Rule, Precision Marking T-Rule 6'',Precision Woodworking Tools T-Square 6'',Stainless Steel Positioning Scribbling Gauge, Carpenter Mark T-Rule

  • 【Clearly Identifiable Scale】The T-rule finishing features low glare and protective powder coated. It has permanent deep markings and graduations for max Readability. This is a T-Rule which can give you higher accuracy,clearer scale,better line drawing..
  • 【Durable and sturdy】The Stainless Steel T-rule is made of good quality Stainless Steel 304, durable and sturdy.
  • A good measuring tool, easy and convenient to use.The stainless steel T-Rule of combination square has deep etching scale for superior legibility and long-lasting usage..
  • 【Wide application】Our combination T-Rule for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy.a useful measuring tool for carpenter,designers,architects,engineers, and so on.
  • Suitable for woodworking,decoration,etc..
  • 【Precision Marking T-Rule】You can easily use this Precision Marking T-Rule to meet your need. If there are any issues, just contact us and we will make it right..
Check Stock

Swiss+Tech ST50022 Key Ring Multi-Tool, Solid Stainless Steel Construction, Polished Finish, 6-In-1 Tool with Screwdrivers, Pliers, Wire Cutter/Stripper and More, (single pack) , Zinc

  • Tool features flat Screwdriver, Phillips Screwdriver, Pliers, Wire Cutter, Wire Stripper, Sheet Shear.
  • 1/8 in. Rule Markings, Screwdriver Tips Meet ANSI Standards.
  • Great for womenft.s or menft.s gifts, auto, camping, hunting, outdoor, hardware and more.
Check Stock

General Tools CF678MED Precision Flex Rule

  • General Tools and Instruments CF678MED Precision Flex Rule, 6 In., 3/4 In. Wide, 1/8-1/16/-1/32 and 1/64 is a ruler is for machinists.
  • The markings are ultra fine black for easier reading and deciphering.
  • The rule is 6 Inch long and has a width of 3/4 Inch.
  • Features a polished stainless steel finish.
  • The graduations of measure are 1/8, 1/16/, 1/32 and 1/64 inch.
Check Stock

General Tools 444 Depth/Angle Gage

  • This easy-to-use depth and angle gage allows you to accurately measure and mark the outside, inside and sloped angles of a surface.
  • The hardened steel base is grooved on both sides to deliver accurate angles.
  • Permits easy setting of the protractor angle to 30, 45 and 60 degree on both sides.
  • The rule can also be used as a depth gage for measuring small holes and slots.
  • Spring tension nut eases depth and anglemeasuring by securing rule in milled slot at a 90 degree angle to base.
  • This gage features a 6 inch by 1/4 inch etched stainless steel rule graduated in 32nds and 64ths with a 2-1/2 inch wide hardened steel base.
Check Stock

6\ / 150 MM DEPTH GAUGE METRIC & IMPERIAL STANDARDS - ENGINEERING

  • 6" / 150 MM DEPTH GAUGE METRIC & IMPERIAL STANDARDS - ENGINEERING.
  • This steel depth gauge is used to quickly obtain measurements of holes or grooves by adjusting the rule to the desired depth.
  • This depth gauge consists of a gun metal finished base and a steel rule.
  • This gauge can be adjusted to the required measurement and then locked into position by a knurled nut.
  • Head is cut out on one side, adjacent to the rule, permitting easier and more precise measurements.
Check Stock

General Tools CF1264 Ultra Test Flex Steel Rule

  • General Tools and Instruments CF1264 Ultra Test Flex Steel Rule, 12 In., 1 In. Wide, 1/8-1/16-1/32 and 1/64 is a ruler is for machinists.
  • The markings are ultra fine black for easier reading and deciphering.
  • The rule is 12 inches long, and has a width of 1 inch.
  • The graduations of measure are 1/8, 1/16, 1/32 and 1/64 inch.
  • Features a plastic sleeve for corrosion prevention and a hard satin chrome finish.
  • The rule is 12 Inch long and has a width of 1 inch.
Check Stock

General Tools CF1845 Ultra Test Rigid Steel Rule

  • General Tools and Instruments CF1845 Ultra Test Rigid Steel Rule, 18 In., 3/4 In. Wide, 1/32-1/64-1/10 and 1/100 is a ruler is for machinists.
  • The markings are ultra fine black for easier reading and deciphering.
  • The rule is 18 inches long, and has a width of 3/4 inches.
  • The graduations of measure are 1/32, 1/64, 1/10 and 1/100 inch.
  • Features a plastic sleeve for added corrosion protection, and a hard satin chrome finish.
  • The rule is 18 Inch long and has a width of 3/4 Inch.
  • Features a plastic sleeve for added corrosion protection and a hard satin chrome finish.
Check Stock

Incra Precision T-rules - Metric (150mm)

  • Instead of squinting at that blur of lines along the edge of your old steel rule.
  • Incra has re-invented the steel rule by putting micro-fine holes at every scale position.
  • Using a T-square this guide draws perfectly placed horizontal lines with dead-on accuracy, with guide slots that wrap around any edges.
  • Rule Set that lets you mark precisely where you want.
  • Micro-fine holes at every scale position.
  • Perfectly placed horizontal lines with dead-on accuracy.
  • Helps you draw perfectly placed horizontal lines.
Check Stock

Rule 35A Rule-A-Matic Bilge Pump Float Switch, Mercury Free,White

  • A genuine Rule product, don't settle for anything less.
  • Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over.
  • Switch is removable from the base for easy cleaning.
  • Completely sealed metal capsules enhance flawless operation.
  • A mercury free snap switch tested to over one million cycles.
Check Stock

Enjoy MFG Ribbed Seat Cover for 2001-2013 Kawasaki KX 85/100 - All Black/Black Ribs

  • Fits Kawasaki KX 85 / 100 2001 - 2013 Models.
  • Steel rule die cut panels for an exact fit.
  • Easy Installation and Handcrafted in the U.S.A..
Check Stock

General Tools 308 Pecision Flex Steel Rule, 3/4 x 6-Inch

  • General Tools and Instruments 308 Precision Flex Steel Rule, 6 In., 3/4 In. Wide, 1/32 and 1/64 Inch is a ruler is for machinists.
  • The markings are ultra fine black for easier reading and deciphering.
  • The rule is 6 inches long, and has a width of 3/4 inches.
  • The graduations of measure are 1/32 and 1/64 Inch.
Check Stock

Ford 15 thru 17 F-150 OEM Genuine RH Passenger LED BLIS Feature Tail Lamp Light Assembly

  • Compatible with 2009-2014 Ford F150 and 2010-2014 Ford SVT Raptor.
  • Complete LED light bar kit includes (1) xenon white 96W high power spot beam LED lightbar, (1) set of industry grade steel metal constructed lower grill location/area bracket mounts and (1) set of relay wire harness w/ in-line fuse and on/off switch.
  • Easy-to-install LED light bar kit features a 100% bolt-on installation procedures with no modification, cutting or drilling required.
  • Hide the off-road LED light bar in the grill to keep your F150 with a factory stock look with excellent lighting whenever you need it to RULE THE NIGHT!.
Check Stock

General Tools and Instruments 307 Precision Flex Steel Rule, 3/4 x 6-Inch

  • General Tools and Instruments 307 Precision Flex Steel Rule, 6 In., 3/4 In. Wide, 1/8-1/32 and 1/64 Inch is a ruler is for machinists.
  • The markings are ultra fine black for easier reading and deciphering.
  • The rule is 6 inches long, and has a width of 3/4 inches.
  • The graduations of measure are 1/8, 1/16, 1/32 and 1/64 Inch.
  • Features a polished stainless steel finish.
Check Stock