Categories

Best Steering Gear Bolt

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

  • [Effortlessly Remove Harmonic Balancers] Use the ABN 46 Piece Harmonic Balancer Puller Kit - Flywheel Puller, Crank shaft Pulley Puller, Steering Wheel Puller Set to apply even pressure to the hub so you can safely remove harmonic balances and other vehicle parts.
  • [Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles.
  • [Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • [Built to Last] Heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch....
Check Stock

OEMTOOLS 25200 Steering Wheel Puller, Puller Tools, Pulley Remover, Steering Puller

  • FITS: This steering wheel kit is designed to fit many major makes and models.
  • The bolt sizes include 5/16 x 8 inches, 15/16 x 24 inches, and 3/8 x 16 inches, helping you easily complete any steering wheel removal.
  • EASY TO USE: Loosen the steering wheel retaining nut.
  • Lubricate and thread the pressure screw into the yoke.
  • Position the puller and bolts, threading the bolts equally into the steering wheel.
  • Tighten the center bolt until the steering wheel is free.
  • DURABLE: It is vital to have heavy duty tools that can stand up to wear and tear when working with steering wheels.
  • The automotive tools in this steering wheel puller kit are composed of steel, designed to be last for years to come.
  • CONVENIENT PACKAGE: Though this steering wheel puller tool set includes many parts, you do not have to worry about losing pieces with the convenient packaging.
  • SET INCLUDES: This steering wheel puller set includes a yoke, a pressure fastener, and 3 sets of pulling fasteners with washers and swivel.
  • Easily tackle any steering wheel repair project.
Check Stock

Hot Wheels Forza Horizon 4 Porsche 911 GT2 [993] 6/6, Blue

  • ◎【Sturdy and Strong】 Sturdy alloy steel stand, robuster than normal steel products. And very easy to clean, just clean with a wet cloth.There are 4 rubber foot mats at the bottom of the gaming steering wheel stand to effectively improve the stability and safety of the wheel stand..
  • ◎【Quick Adjustment】 Sim wheel stand supports left and right gear switching, which is very convenient. The height of the wheel carrier can be adjusted by adjusting the bolts of both arms. The angle of the steering wheel can be adjusted within ±5°.The angle of the pedal can be adjusted in three gears..
  • ◎【Folding Function】The marada wheel stand can be folded, and after removing the gearshift lever, simply loosen the bolt and you can very quickly. It saves space, reduces floor space and is easy to store. If you don’t have enough space in your playroom, this is a good choice..
  • ◎【Installation Tips】Pre drilled.You can also drill holes according to your needs, and the steering wheel stand supports drilling.The accessories are complete, and extra bolts are given to help you install the steering wheel and pedals.It is recommended to watch the installation video on the product page before installation..
  • ◎【Application models】Racing wheel stand compatible ....
Check Stock

JYAU RZR Steering Wheel Puller Tool for Polaris UTV XP1000 Turbo

  • Steering Wheel Puller Tool is a must have for race teams and recreational riders. Made from billet aluminum construction, a heavy duty center bolt for maximum leverage and socket head allen screws for outer edge pressure..
  • Compatible Replacement for Polaris RZR UTV XP1000 Turbo with the 2 threaded holes steering wheel - DOES NOT fit 2018+ XP Turbo S with Sparco steering wheel..
  • This Steering Wheel Puller Tool is designed for Polaris Vehicles with the 2 threaded holes in the OEM steering wheel. We recommend you pop the center steering wheel cover off to verify that your steering wheel has the 2 holes..
  • Usage Method - Heavy duty center bolt for maximum leverage Socket head allen screws for outer edge pressure Screw it to the threaded holes in your stock steering wheel and then tighten the center screw..
  • 1-Year Warranty - This Steering Wheel Puller Tool comes complete with a 1-Year Warranty. If the puller tool ever fails on your Polaris RZR UTV XP1000 Turbo within the period, simply contact us for a replacement. Save time and money by taking advantage of this ..
Check Stock

Red 3-Spoke 15 Dia, Cushion Grip Steering Wheel, 2.75 Inch Dish

  • This 15" steel steering wheel is perfect for the budget minded racer.
  • Three spoke design with a 2-3/4" dish fits well in almost any interior.
  • Fits standard 3 bolt quick release hubs or can also be used with 3 bolt steering column adapters without a horn.
  • Rubber cushion coating on steering wheel improves grip and reduces driver fatigue.
  • Steering wheel center is black with your choice of grip color in black, red, blue, or purple.
Check Stock

Kauplus Harmonic Balancer Puller Set Flange-Type Puller Set Master Bolt Grip Set

  • Multiple use for removal and installation of harmonic balancers, gear puller, pulley puller.
  • Idea for remove harmonic balancers, crankshaft pulleys, steering wheels and gear pulleys, capable of handling 2 or 3-way bolt pulling applications....
  • Set contains: (1) heavy duty forged three-way puller flange, (2) live-center forcing screws, (4) live-center adapters make a multi-functional....
  • Includes: 3 pieces of special shoulder bolts (1/4-28UNF x 3-1/4") for GM 3300-3800 V6 crankshaft pulleys.
  • Includes: (11) washer head hardened steel bolts (Grade 8): M8x1.25 x 45mm, M8 x 1.25 x 65mm, M8 x 1.25 x90mm, M10 x 1.5 x 35mm, 5/16-18UNC x 3.5",....
Check Stock

SOUTHWEST SPEED POWER STEERING CONVERSION KIT,COMPATIBLE WITH 76-86 JEEP CJ5 CJ7,20:1 GEAR BOX,1400 SERIES POWER STEERING PUMP,V-BELT PULLEY,PITMAN ARM,TELESCOPING STEERING SHAFT,LINES,HOSES,FITTINGS

  • Southwest Speed Heavy Duty Manual to Power Steering Gear Box Kit with 20:1 Gear Ratio, and 1400 Series Performance Power Steering Pump that fits 1976-1986 Jeep CJ > This Southwest Speed Steering Gear Box Kit includes Southwest Speed Re-manufactured Heavy Duty Factory Replacement Power Steering Gear Box featuring a 20:1 Gear Ratio with 13/16"-36 Input Shaft, and 1 1/8"-32 Spline Output Shaft.
  • Kit Includes: | Southwest Speed Re-manufactured 1976-1986 Jeep CJ Replacement Heavy Duty Power Steering Gear Box (# 105-2974) > Engineered for superior durability > O-Ring Ports > O.E. Spool Valves > Heavy Duty Gears > 20:1 Gear Ratio > 13/16"-36 Input Shaft > 1 1/8"-32 Spline Output Shaft > 2.750" Standard Piston Diameter > 18mm O-Ring Pressure Fitting > 16mm O-Ring Return Fitting.
  • Southwest Speed Re-manufactured 1976-1986 Jeep CJ 1400 Series Performance Power Steering Pump (# 149-1622) > Fits Jeeps with 258/304/401 cu. in. engines, as well as 4.0 Liter, with the OE Can > Re-manufactured > Perfect pump for rock crawlers > 1400 Series Pumps are Identical to the 1300 Series Pumps but are manufactured with much stronger components > Larger Ring and rotor which displaces more fluid per revolution.
  • Southwest Speed 1976-1986 Jeep CJ 5 3/4" Power Steering Pump V-Belt....
Check Stock

Teach Your Teenager How to Drive a Car: Sequential Lessons for a New Driver (Learn to Drive)

  • ◎【Sturdy and Strong】 Sturdy alloy steel stand, robuster than normal steel products. And very easy to clean, just clean with a wet cloth.There are 4 rubber foot mats at the bottom of the gaming steering wheel stand to effectively improve the stability and safety of the wheel stand..
  • ◎【Quick Adjustment】 Sim wheel stand supports left and right gear switching, which is very convenient. The height of the wheel carrier can be adjusted by adjusting the bolts of both arms. The angle of the steering wheel can be adjusted within ±5°.The angle of the pedal can be adjusted in three gears..
  • ◎【Folding Function】The marada wheel stand can be folded, and after removing the gearshift lever, simply loosen the bolt and you can very quickly. It saves space, reduces floor space and is easy to store. If you don't have enough space in your playroom, this is a good choice..
  • ◎【Installation Tips】Pre drilled.You can also drill holes according to your needs, and the steering wheel stand supports drilling.The accessories are complete, and extra bolts are given to help you install the steering wheel and pedals.It is recommended to watch the installation video on the product page before installation..
  • ◎【Application models】Racing wheel stand compatible wi....
Check Stock

Caltric Steering Sector & Pinion Gear W/Bushings Compatible With John Deere 155C 190C

  • 【PREMIUM QUALITY】Steering Sector Pinion Gear Rebuild Kit is made of quality steel and has nice anti-rust coated finish, which enhance the durability and superior reliability.
  • 【FITMENT】Steering sector gear and pinion gear replacement for John Deere 107H 107S 92H D105 D110 D125 D130 D140 & More. Please verify your model is listed in the fitment section.
  • 【REPLACES#】The package includes 1 x set sector plate and 1 x pinion gear as pictures show. The OEM Number: UC13515 GX26057 GX26220. Please note that the steering sector gear plate with 26 teeth!.
  • 【HIGH RELIABILITY】Taking into account the quality of the product, this steering pinion sector gear rebuild kit has undergone a rigorous testing to ensure proper operating parameters to factory specification.
  • 【24-MONTH WARRANTY】Exquisite craft, strict quality control and excellent after-sales service that is why our teering sector gear and pinion kit worth your purchase.
Check Stock

NRG SRK-200-1BK Black Body/Titanium Ring GEN 2.0 Racing Performance Steering Wheel Quick Release Adapter Fit 6 Bolt 70mm SFI Spec

  • Quick Release Spec: Gen 2.0 , Height : 2.50" / Width : 3.50".
  • Tight Ball Bearing Lock Design Eliminates Free-Play.
  • Fits Any 6 Bolt 70mm or 74mm Spacing Steering Wheel.
  • Fits on Steering Wheel Hub Adapters with 6-Bolt 70mm Bolt Spacing.
  • Installation: Please make sure to purchase an aftermarket 6 hole hub adapter and steering wheel that matches your vehicles.
Check Stock

ABN Bolt Grip Set – Gear Puller Steering Wheel Puller Pulley Puller Harmonic Balancer Puller Crank Puller 43pc

  • GET THE JOB DONE: The ABN | Deluxe Master Bolt Extractor Grip Set is designed to be used on your pickup truck, SUVs, and small engine vehicle as a steering wheel puller kit, gear pully puller, harmonic puller, and crank pulley tool.
  • Can also handle 2 and 3-way bolt pulling applications.
  • VARIOUS SIZES: Bolt sizes – M8x1.25x90mm, M8x1.25x45mm, 1/4-28UNFx3” inches, M8x1.25x65mm, 5/16-24UNFx3” inches, 5/16-18UNCx3.5” inches, 3/8-24UNFx1.5” inches, 3/8-16UNCx2” inches, 3/8-16UNCx3” inches, 3/8-16UNCx4.5” inches, M10x1.5x35mm.
  • BUILT TO LAST: Puller remover tool kit has a forged 3-way puller flange construction and grade 8 hardened steel bolts for maximum strength and longevity.
  • EASY STORAGE: Heavy-duty 14.75” x 3” x 11.3” inch (37.5cm x 7.6cm x 28.7cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Compartments include sizing labels for easy identification.
  • PACKAGE CONTENTS: 43-piece pulley removal tool set includes (1) 3-way puller flange/yoke (with 4 slots for 2 or 3 hole applications), (2) different length live-center forcing screws, (4) 3-inch and 6-inch live-center adapters, (3) of each size of bolt, and (1) carrying case for your convenience.
Check Stock

The ROP Shop | Steering Repair Kit with Sector Gear for John Deere GX21924, GX21924BLE

  • The ROP Shop replacement Steering Repair Kit with Sector Gear for John Deere GX21924, GX21924BLE.
  • Specs - Sector Gear Dimensions: 8 1/2" Diameter. 11/16" Inner Diameter. 5 5/8" Length. 5/16" Thickness. Pinion Gear Dimensions: 11 Teeth. 1" Height. 1 3/8" Outside Diameter. Shaft Bushings Dimensions: 1 1/8" Diameter without Tabs (1 5/16" with tabs). 5/8" Inner Diameter. 7/8" Height. Refer to image 2 for more information.
  • Includes - (1) Steering Sector Gear, (1) Steering Pinion Gear, (1) Bushing, (2) Screws, (1) Washer, (3) Lock Nuts & (2) Steering Shaft Bushings.
  • This kit is for/fits John Deere 102, 105, 107S, 115, 125, 135, 145, 155C, 190C, 92H, D100, D105, D110, D120, D125, D130, D140, D150, D160, D170, LA100, LA105, LA110, LA115, LA120, LA125, LA130, LA135, LA140, LA145, LA150, LA155, LA165, LA175, X110, X120, X125, X130R, X135R, X140, X145, X155R, X165 Lawn Tractors.
  • Please be sure to check your part or model number to ensure this is the correct steering repair kit for your unit. Also, please note this may replace multiple parts numbers.
Check Stock

Steering Gear Box Stabilizer Kit - Compatible with Dodge Ram Models - 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Ram 1500, 94-02 Ram 2500, 3500 4WD - Steering Brace Bar - Death Wobble Fix - 4x4

  • Steering Gear Box Stabilizer Kit - is designed to eliminate steering slop in your Ram Truck. This adds an additional bearing to the bottom of the steering box sector by a cross member tying the frame rails together which eliminates flame flex..
  • Compatible With Dodge Ram 4x4 Trucks - 94, 95, 96, 97, 98, 99, 00, 01 Ram 1500 | 1994 - 2002 Ram 2500 | 94-02 Ram 3500 |. WILL NOT FIT 2WD and Ram POWER WAGON models. Also similar to "Darin's Steering Stabilizer" (DSS) No drilling or welding required for the installation of this kit..
  • This Steering Gear Box Stabilizer Kit comes complete with all the hardware needed for proper installation which includes the stabilizing brace assembly, UCFL205-16 flanged bearing, and all the bolts and washers for your four wheel drive truck..
  • OEM Fit, Quality, Finish - Perfect snug fit that can be easily installed in minutes with no drilling or welding required. This steering gear box stabilizer manufactured by AA Ignition is designed to prolong the life of the steering components on your truck..
  • Lifetime Warranty - This steering gear box stabilizers kit comes complete with a lifetime warranty. If the part ever fail on your Ram truck simply contact us for a replacement. Save hundreds of dollars by getting quality parts & accessorie....
Check Stock