Categories

Best Steering Gear Bushing

Huthbrother Gear Bush 941-0656A 741-0656A Pinion Gear & Bushing for MTD Cub Cadet 717-1554 917-1554,Replace Toro 112-0863 & Cub Cadet LT1042 LT1045 LT1046 LT1050

  • ★【Replaces Part Numbers】--Replaces Part Numbers： For MTD 717-1554, Toro 112-0863, Cub Cadet LT1042 LT1045 LT1046 LT1050, Hex Steering Bushing Specs, ID: 5/8" Ht: 1/4".
  • ★【 Product description】--Steering Shaft Pinion Gear & Bushing For MTD 741-0656 941-0656A 717-1554 Toro 112-0863, Used on Riders since 1999. 11 Tooth. Splined Bore.
  • ★【 Product description】--*Steering Shaft Pinion Gear Replace for MTD 717-1554, Fits for Rotary 13229 bushing, Used on Riders since 1999. 11 tooth. Splined bore.941-0656A, 741-0656.
  • ★【Fits Cub Cadet】--Cub Cadet LT1018, LT1022, LT1024, LT1040, LT1042, LT1045, LT1046, LT1050, SLT1550, SLT1554, GT1222, GT1554Fits: Troy-Bilt Bronco, LTX1842, LTX2146, GTX2446, GTX2654, Horse, Big Red GT50 & GT54.
  • ★【After-Sales Service 】---Read the product description carefully to make sure it's what you need, If you have any problems, we are happy to respond,We will reply to you within 24 hours,Please match the part number with part number on the old part to ensure fitment before purchasing..
Check Stock

Bushing Ford 2000 3000 4000 Tractors

  • Includes: 6 Pieces of Steering Shaft Bushings as pictured.If you have a loose steering wheel, you may need to use these bushing.if you have to replace your pinion gear and sector gear due to worn teeth then replace these bushings also, these bushings being worn is most likely the cause of the pinion and sector gears wearing out.
  • Steering Shaft Bushings Fits for John Deere lawn mower D100, D105, D110, D120, D130, D140, D150, D160..
  • Steering Shaft Bushings Fits for John Deere lawn mower L100, L102, L105, L108, L110, L111, L115, L118, L120, L125, L130, L135, L145 102, 105, 115, 125, 135, 145, 155C, 190C.
  • Steering Shaft Bushings Fits for John Deere lawn mower 90C X105, X110, X115, X120, X125, X135, X140, X145, X155R, X165.
  • Specification: Steering Shaft Bushings Replace for John deere OE Part Number GX21994.
Check Stock

The ROP Shop | Steering Repair Kit with Sector Gear for John Deere GX21924, GX21924BLE

  • The ROP Shop replacement Steering Repair Kit with Sector Gear for John Deere GX21924, GX21924BLE.
  • Specs - Sector Gear Dimensions: 8 1/2" Diameter. 11/16" Inner Diameter. 5 5/8" Length. 5/16" Thickness. Pinion Gear Dimensions: 11 Teeth. 1" Height. 1 3/8" Outside Diameter. Shaft Bushings Dimensions: 1 1/8" Diameter without Tabs (1 5/16" with tabs). 5/8" Inner Diameter. 7/8" Height. Refer to image 2 for more information.
  • Includes - (1) Steering Sector Gear, (1) Steering Pinion Gear, (1) Bushing, (2) Screws, (1) Washer, (3) Lock Nuts & (2) Steering Shaft Bushings.
  • This kit is for/fits John Deere 102, 105, 107S, 115, 125, 135, 145, 155C, 190C, 92H, D100, D105, D110, D120, D125, D130, D140, D150, D160, D170, LA100, LA105, LA110, LA115, LA120, LA125, LA130, LA135, LA140, LA145, LA150, LA155, LA165, LA175, X110, X120, X125, X130R, X135R, X140, X145, X155R, X165 Lawn Tractors.
  • Please be sure to check your part or model number to ensure this is the correct steering repair kit for your unit. Also, please note this may replace multiple parts numbers.
Check Stock

HRepair Flip Manufacturing Steering Sector Gear & Pinion Kit Fits John Deere LA Series - 19 Tooth LA120, LA125, LA130, LA135, LA140, LA145, LA150 Replace Part Number GX21924BLE, GX20053, GX20054

  • Replacement Replace For OEM Part Number GX21924BLE, GX20053, GX20054, GX21994.
  • Check out the steering sector gear and pinion gear of the lawn mower. If they are stripped, which means they need to be replaced Our well manufactured Steering sector kit could fix your problem immediately and will save you time and money..
  • Fitment For: for John Deere LA100 LA102 LA105 LA115 LA125 LA130 LA135 LA140 LA145 Mower Tractors, You may match the fitment carefully in the description..
  • Notice: The L and LA mowers do NOT use the same steering sector plate. Please verify your model is listed in the fitment section..
  • You Will Get : 19 Tooth LA Series Replaces Part Numbers GX21924BLE Sector Plate, GX20053 Pinion Gear, GX20054 Metal Bushing, GX21994 (X2) Plastic Bushing as pictured.One year warranty. If you have any questions, you can find us by email, and we will solve it for you in time..
Check Stock

MTD 941-0656A Hex Flange Bearing 5/8 ID

  • Replacement part number:717-1554 917-1554 941-0656A 741-0656A 741-0656 9410656a 9410656 112-0863.
  • Compatible with Replace for MTD 717-1554, Toro 112-0863 941-0656A, 741-0656 - Used on Riders since 1999. 11 tooth. Splined bore.
  • Hex Steering Bushing Specs, ID: 5/8" Ht: 1/4" Replacement Steering Shaft Pinion Gear Bushing for Troy-Bilt Bronco Horse Big Red GT50 GT54.
  • Compatible with Fits Cub Cadet 1170, 1180, 1212, 1515, 1517, 1525, 1527, 1529, 1600, 1800,LT1018, LT1022, LT1024, LT1040, LT1042, LT1045, LT1046, LT1050, SLT1550, SLT1554, GT1222,GT1554.
  • Compatible with Troy-Bilt Bronco, LTX1842, LTX2146, GTX2446, GTX2654, Horse, Big Red GT50 & GT54 - Compatible with Fits: Columbia CR30, White LT-5000, MTD Gold, Lawn Chief 46" Deck, for Yard-Man & Yard Machines & Huskee.
Check Stock

HD Switch - Improved Steering Gear Rebuild Kit Replaces 532194732 194732 Sector Plate, 587738906 Pinion, 532194747 Machined Pivot Bushing Upgrade & Hardware - Husqvarna Craftsman AYP Poulan Weedeater

  • OEM Upgrade: Precision Machined Pivot Bushing Improves Fit and Function while Increasing Durability and Longevity.
  • Longer Life: Oil Impregnated Steering Shaft Pinion Gear for Less Wear.
  • Includes: Sector Gear, Pinion Gear, Thrust Washer, Improved Pivot Bushing, Mounting Bolts and Flange Nut.
  • LIGHTNING-FAST HANDLING: ALL Orders Before 2pm EST SHIP SAME DAY - PLUS Free 2 Day Priority Shipping.
Check Stock

kipa Steering Shaft bushings fits for John Deere GX21994 L100 LA Series Sabre & Scotts Lawn Mower Tractors, Pack-4

  • KIPA Well-manufactured Steering shaft bushings, Pack-4, If your steering wheeling is loose and moves. These bushing will probably take care of it. if your having to replace your pinion gear and sector gear due to worn teeth then replace these bushings also, these bushings being worn is most likely the cause of the pinion and sector gears wearing out.
  • Specification: 5/8" ID, .900" OD, .870" Height.
  • Fitment: Fit these models--All L100 series and the LA series L100, L102, L105, L108, L111, L110, L115, L125, L135, L145, 155C, 190C, LA100, LA110, LA115, LA120, LA130, LA135, LA140, LA150, LA145, LA155, LA165, LA175.
  • Fitment: they also fit D100, D105, D110, D120, D130 D140, D150, D160, G100, G110, Z225,1642HS, E150, S240, Mower tractors and other many, Please match the OEM Code and the sizes, Thanks.
Check Stock

Replacement for Honda Dinli e-ton Yerf Dog Yamaha Polaris Arctic Cat ATV Steering Bushing Made in USA Aftermarket (1)

  • PU Steering Stem Bushing color = Honda RED PU Steering Stem Bushing MADE IN THE USA.
  • Manufacturer Part Number: 650435 634136 0450499 53221-HB2-004.
  • E-ton 40cc 50cc 70cc 90cc ATVs Honda TRX70 1986 1987 Honda Fourtrax TRX 70 Polaris Predator 90 Scrambler 90 Sportsman 90 Dinli 50 70 90 100 110 Helix Trex Diamond Back and Arctic Cat 50cc & 90cc.
  • Fits ALL e-ton atv models 40-90cc to have grease added to inside of bushing only Outer Dimension=28mm or 1.100 inches Inner Dimension=22mm or .870 inches Height=30mm or 1.180 inches.
  • Part number 650435 or 634136 or 0450499 or 53221-HB2-004.
Check Stock

Steering Sector Plate & Pinion Gear Bushings Kit Replacement for John Deere LA100 LA105 LA120 LA130 LA135 LA140 LA145 LA150 LA165 LA175 Part# GX21924BLE GX20053 YY-US

  • This kit including: Sector plate, pinion gear, nut and bolt, 1 x set metal bushing, 2 x plastic bushing.
  • D series Sector Plate GX21924BLE. Pinion Gear GX20053. Metal Bushing GX20054. Plastic Bushing GX21994. Please note that the D series gears with 19 teeth!.
  • Sector Plate and Pinion Gear Replacement for John Deere LA100 LA105 LA110 LA115 LA120 LA125 LA130 LA135 LA140 LA145 LA150 LA155 LA165 LA175.
  • Sector Plate and Pinion Gear Replacement for John Deere 102 105 107S 115 125 135 145 155C 190C.
  • Replacement for John Deere D100 D105 D110 D120 D125 D130 D140 D150 D160 D170.
  • Sector Plate and Pinion Gear Replacement for John Deere X110 X120 X125 X130R X135R X140 X145 X155R X165.
Check Stock

WEISHUJI Aluminum Steering Knuckle Hub Carrier,Aluminum Steering Knuckles Hub Carrier Upgrade Kit 102210 102211 102212 102057 102040 for Redcat Volcano EPX/Pro Replacement Parts

  • Aluminum Steering Knuckle Hub Carrier is compatible with: 1/10 Scale RC Vehicles Monster Truck/Buggy/Drift/On Road Redcat Volcano Epx /Pro, Vortex Epx /Pro, Shockwave,Tornado Epx /Pro, Aluminum Steering Knuckle Hub Carrier is for Vortex Epx /Pro, Lightning EPX /Pro / STK / STR,Sandstorm // HSP 94111 Brontosaurus /Pro, XSTR /Pro,WARHEAD..
  • Aluminum Steering Knuckles Hub Carrier Upgrade Kit is 100% New,Aluminum Steering Knuckles Hub Carrier Upgrade Kit is exquisite workmanship & Durable..
  • Aluminum Steering Knuckles Hub Carrier Upgrade Kit is CNC machined for precision.Purple-Anodized.Aluminum Steering Knuckle Hub Carrier has Increased strength and precision.Easy upgrade from the original part..
  • Aluminum Steering Knuckle Hub Carrier is replacement of Stock Part Model# 102210 102010B 02132B 102211 102011B 02131 102212 102012 02130B 122057 122040 02013 02014 02015 Aluminum Steering Knuckles Hub Carrier Upgrade Kit is for All Bolts & Steering Plate Bushing & Screws included.
Check Stock

GX21924BLE GX21924 GX20053 Steering Sector Pinion Gear Rebuild Kit Replacement for John Deere 102 115 125 LA100 LA105 LA120 D125 D130 D140 X145 L Series Lawn Tractors 19 Teeth 1404-1108 GX25785

  • Replace OEM Part Number：GX21924BLE，GX21924，GX25785，GX20053,GX20054,GX21994，GX20052BLE.
  • FITS: John Deere 102, 105, 107S, 115, 125, 135, 145, 1545, 155C, 190C , 92H, D100, D105, D110, D120 , D125, D130, D140, D150, D160, D170, LA100, LA105, LA110, LA115, LA120, LA125 , LA130, LA135, LA140, LA145, LA150, LA155, LA165, LA175, X110, X120, X125, X130R, X135R, X140, X145, X155R and X165 model lawn tractors.
  • Material: Made of high quality steel with anti-rust coated finish.Please note that the D series gears with 19 teeth.
  • Package include: 1 x set sector plate, pinion gear, nut and bolt, 1 x set metal bushing, 2 x plastic bushing as pictures show. The L and LA mowers do NOT use the same steering sector plate.
  • Slother aim to providing you with better products and services. You can contact us first for any problem or concern, your problem will be figured out with our support..
Check Stock

Long and Short Polyurethane Bushing Replacement for Polaris Sportsman 335 400 400L 450 500 570 800 1996-2018 Replace # 5436973 5439270 - Control Arm Bushing Kit

  • 【FIT THE FOLLOWING MODELS】-- Compatible with 1998-2000 Polaris Sportsman 335 | 1996-2014 Polaris Sportsman 400 | 2006-2018 Polaris Sportsman 450 | 1996-2013 Polaris Sportsman 500 | 2014-2018 Polaris Sportsman 570 | 2005-2014 Polaris Sportsman 800..
  • 【HARD CONTROL BUSHING】-- With construction of heavy duty material, it can withdraw a lot of press without bending..
  • 【POWERFUL FUNCTION】-- The control bushing mainly mounts on car suspension and steering joints to absorb road bumps, control the amount of movement in the joints and reduce noise and vibration；While it is NOT a genuine a arm bushing part, it is an ideal replacement designed to fit or work like the factory part..
  • 【QUALITY ASSURANCE】-- Our bushings are high quality polyurethane bushings. This material is stronger than original ones. And it also lasts longer than the ones made of rubber. Thus, it is not easy to get broken or bent and you can use it for a long time to save your pocket money..
  • 【BUY WITH CONFIDENCE】-- Order from Skyee-blue for a true worry-free shopping experience. The bushing comes with one year warranty. If the a arm bushing ever fails on your Polaris, just feel free to contact us for a replacement..
Check Stock

SOUTHWEST SPEED POWER STEERING CONVERSION KIT,COMPATIBLE WITH 76-86 JEEP CJ5 CJ7,20:1 GEAR BOX,1400 SERIES POWER STEERING PUMP,V-BELT PULLEY,PITMAN ARM,TELESCOPING STEERING SHAFT,LINES,HOSES,FITTINGS

  • Southwest Speed Heavy Duty Manual to Power Steering Gear Box Kit with 20:1 Gear Ratio, and 1400 Series Performance Power Steering Pump that fits 1976-1986 Jeep CJ > This Southwest Speed Steering Gear Box Kit includes Southwest Speed Re-manufactured Heavy Duty Factory Replacement Power Steering Gear Box featuring a 20:1 Gear Ratio with 13/16"-36 Input Shaft, and 1 1/8"-32 Spline Output Shaft.
  • Kit Includes: | Southwest Speed Re-manufactured 1976-1986 Jeep CJ Replacement Heavy Duty Power Steering Gear Box (# 105-2974) > Engineered for superior durability > O-Ring Ports > O.E. Spool Valves > Heavy Duty Gears > 20:1 Gear Ratio > 13/16"-36 Input Shaft > 1 1/8"-32 Spline Output Shaft > 2.750" Standard Piston Diameter > 18mm O-Ring Pressure Fitting > 16mm O-Ring Return Fitting.
  • Southwest Speed Re-manufactured 1976-1986 Jeep CJ 1400 Series Performance Power Steering Pump (# 149-1622) > Fits Jeeps with 258/304/401 cu. in. engines, as well as 4.0 Liter, with the OE Can > Re-manufactured > Perfect pump for rock crawlers > 1400 Series Pumps are Identical to the 1300 Series Pumps but are manufactured with much stronger components > Larger Ring and rotor which displaces more fluid per revolution.
  • Southwest Speed 1976-1986 Jeep CJ 5 3/4" Power Steering Pump V-Belt....
Check Stock