Categories

Best Steering Swivel Joint

TUCAREST 425-168 (for 3.5/3.6L w/Hydraulic Power Steering,Not Electric) Intermediate Steering Shaft Column w/U-Joint Fit for 06-12 Chevy Malibu / 06-10 Pontiac G6 / 07-09 Saturn Aura # 25979679

  • Intermediate Steering Shaft : Keeps the steering gearbox and steering wheel connected. The universal joint or also called as u-joint at the end of the steering shaft connects to the steering gearbox which has another u-joint that connects to the steering wheel allows for the angles between them to be supported resulting to your vehicle wheels smooth and easy turning..
  • Direct Replacement - Easy Installation:While this is not a genuine OEM part, it is a direct replacement and will fit, work and function like the original part. This replacement intermediate steering shaft is manufactured from high quality steel to ensure longevity providing excellent value..
  • Universal Joint :Direct replace your worn or damaged steering shaft, with new U-Joints featuring precision needle bearings for smooth, silent operation and reliable performance..
  • Cost-effective:We are a factory direct sales.Customers can spend a small amount of money and get high quality Brand new Intermediate Steering Shaft..
  • PLEASE NOTE: Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner,Do not count on year make and model only,please view compatability tab including the notes,or send us a message to make sure it matches exactly..
Check Stock

Deebior Compatible with 80-82 C10 80-83 C10 Suburban 80-83 C30 80-83 C50 80-82 K10 80-83 K10 Suburban 80-83 K20 80-83 K20 Suburban 80-83 K3 or Truck Black Tilt Steering Column Column Shift

  • Intermediate Steering Shaft : Keeps the steering gearbox and steering wheel connected. The universal joint or also called as u-joint at the end of the steering shaft connects to the steering gearbox which has another u-joint that connects to the steering wheel allows for the angles between them to be supported resulting to your vehicle wheels smooth and easy turning..
  • Direct Replacement - Easy Installation:While this is not a genuine OEM part, it is a direct replacement and will fit, work and function like the original part. This replacement intermediate steering shaft is manufactured from high quality steel to ensure longevity providing excellent value..
  • Universal Joint :Direct replace your worn or damaged steering shaft, with new U-Joints featuring precision needle bearings for smooth, silent operation and reliable performance..
  • Cost-effective:We are a factory direct sales.Customers can spend a small amount of money and get high quality Brand new Intermediate Steering Shaft..
  • PLEASE NOTE: Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner,Do not count on year make and model only,please view compatability tab including the notes,or send us a message to make sure it matches exactly..
Check Stock

YSTOOL Front End Service Tool Set with Automotive Ball Joint Separator Tie Rod End Puller Pitman Arm Remover 5 PCS Removal Splitter Kit for Car SUV Light Truck Pickup

  • ...ng to your ball joint choose the compatible puller, insert the puller into the ball joint opening, aim the bolt at the ball joint, turn the bolt by using the right size ratchet wrench, squeeze the ball joint out. These ball joint pullers can easily remove the stubborn ball joint, pitman arm, idler arm, tie rod end, steering linkages and steering boxes on front suspension and steering system, and will not damage boot/sleeve and other parts..
  • Ball joints require regular maintenance and replacement on average 75,000 to 150,000 miles or it may cause inconvenience and even safety hazards such as steering failure, instable driving and ball joint fracture. YSTOOL front end service tool kit is a necessary tool set for replacing ball joints, widely uses for most imported and domestic minicar, compact car, mid-size car and light pickup truck. May not fit for most full-size car, mid-size and heavy-duty pickup, mid-size and heavy-duty truck..
  • Your satisfaction and recognition are always what we pursue. Within one month from the date of purchase, the product can be returned unconditionally if it is complete and without any damage. Within one year warranty period, any quality issue with the product, you are promised to exchange or refund the problematic parts for fr....
Check Stock

Allstar Steering Loading Coupler, 3/4 in Steering Shaft, Steel, Black Paint, Woodward 20 Spline Disconnect Couplers, Each (ALL52307)

  • combination u-joint and a non-locking steering coupler.
  • slips over the splined end of the steering shaft for easier loading and unloading of cars in enclosed trailers through the use of a remote steering shaft.
  • Coupler has a built-in u-joint that accepts 3/4" steering shaft or tubing.
Check Stock

Powerbuilt 648468 Tie Rod and Ball Joint Separator Silver 15/16 in.

  • For separating ball joint from steering knuckle.
  • Drop-forged, heat-treated alloy steel wedge tool.
  • Separates ball joint from steering knuckle.
Check Stock

Bailey Universal Joint Assemblies (Standard Series), Standard U Joint with 1 inch x 1 inch Inner Diameter - Universal Joint with Relubricable Bearings - Standard Rod Ends Ball Joint, 1000 RPM, 2.52 lb

  • SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 1-inch x 1-inch inner diameter, ¼” keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.52 lb (1.14 kg)..
  • PRECISE CONTROL: This driveline u joint is ideal for connecting control rods, steering links, etc. It maintains a fixed point of contact between two shafts and can control the movement of the shafts with high precision..
  • HIGH SPEED OPERATION: This 1000 RPM u joint offers 90 degree deflection and is capable of carrying up to 1000 RPM torque. Thanks to its needle roller bearings, this universal standard joint can tackle big and rigid shafts with ease..
  • MADE TO LAST: This universal joint is made with durability in mind. Its forged yoke is sturdy, flexible, reliable, and holds up well against high heat. Our universal joint is long-lasting and low maintenance..
  • MULTIPURPOSE USES: Our steering shaft u joint has a wide variety of applications in automobiles including lightweight, commercial and off-highway vehicles. It offers hassle-free interchange with the Spicer 1000 series..
Check Stock

Dorman 425-183 Steering Shaft Compatible with Select Models

  • 【High Quality】The Intermediate Steering Shaft is exact OE manufactured and can be replaced directly with the original parts in your vehicle. It is....
  • 【Universal Joint 】Direct replace your worn or damaged steering shaft, with new U-Joints featuring precision needle bearings for smooth, silent....
  • 【Compatibility】This Steering Shaft fits for Cadillac Escalade ESV EXT.
  • 19153614, 425-176 . This Steering Column Intermediate Shaft will meet or exceed OEM....
  • 【Warranty】100% satisfaction guarantee, 1 year UNLIMITED REPLACEMENT PROMISE, If you have any issues with the Intermediate Steering Shaft Assembly,....
Check Stock

DPTOOL Ball Joint Separator Kit Heavy Duty Control Arms Steering Knuckles Tie Rod Ends Remover Tool 22mm 24mm 27mm 31mm 36mm Compatible with BMW/Benz/Land Rover

  • ...des W211, W219, W220, and W230. Compatible with Porsche 996 Carrera. Compatible with Audi A4, A6 lower suspension ball joint.
  • Efficient Removal Ball Joint: Specially for quick and easy removing the ball joint connections, removal of tie rod ends, steering knuckles, and lower control arms to replace a ball joint. If you are doing any type of suspension work, this is a essential too. It makes separating ball joints as easy as a snap.
  • Not Damage Ball Joint Boot : Use this tool instead of the pickle fork. This tool is quieter, takes less effort, and most important of all, it does not damage the ball join boot. A must have if you are working on the suspension and have to separate the ball joint but are not planning on replacing it.
  • Easy To Use: lubricated the threads on this separator and applied turns slowly to the driver screw. the ball joint will violently popped out of the steering knuckle.
  • Heavy Duty: This ball joint separator made of heavy duty steel, thick and durable, which could withstand a lot of potential energy without breaking. and we offer 12 mon....
Check Stock

DIYOLFALL Golf Cart Steering Joint for Club Car DS 1984+ Gas or Electric OEM# 1013861

  • Applicable models ：Club Car Gas & Electric 1984-up DS golf cart..
  • Package content：1Pcs 1013861 Shaft Intermediate Steering Joint..
  • This intermediate steering joint kit perfectly and well made, mainly made of iron.Increasing handling for prolonged suspension and handling..
  • Replaces Club Car Part Number 1013861.Will not fit Club Car Precedent golf carts..
  • If There Are Any Problems With The Product, Please Contact Us And We Will Serve You..
Check Stock

OEMTOOLS 25200 Steering Wheel Puller, Puller Tools, Pulley Remover, Steering Puller

  • FITS: This steering wheel kit is designed to fit many major makes and models.
  • The bolt sizes include 5/16 x 8 inches, 15/16 x 24 inches, and 3/8 x 16 inches, helping you easily complete any steering wheel removal.
  • EASY TO USE: Loosen the steering wheel retaining nut.
  • Lubricate and thread the pressure screw into the yoke.
  • Position the puller and bolts, threading the bolts equally into the steering wheel.
  • Tighten the center bolt until the steering wheel is free.
  • DURABLE: It is vital to have heavy duty tools that can stand up to wear and tear when working with steering wheels.
  • The automotive tools in this steering wheel puller kit are composed of steel, designed to be last for years to come.
  • CONVENIENT PACKAGE: Though this steering wheel puller tool set includes many parts, you do not have to worry about losing pieces with the convenient packaging.
  • SET INCLUDES: This steering wheel puller set includes a yoke, a pressure fastener, and 3 sets of pulling fasteners with washers and swivel.
  • Easily tackle any steering wheel repair project.
Check Stock

Boltigen Pressure Washer Swivel Fitting, Anti Twist 3/8 NPT Male to Female Stainless Steel Connector Joint, 360 Degree Kink Free Swivel Fitting (3/8 NPT Male to 3/8 NPT Female-1Pc)

  • 【Swivel Fitting】 Kink free Swivel Joint for pressure washer with 3/8'' NPT male and female thread fitting，connects hose to hose or gun to hose..
  • 【Smart Design】 Pressure washer swivel joint with 360 degree rotation, eliminates twists and kinks on working, reduces stress on not only hose and gun, but also operator..
  • 【High Working Pressure】 Working pressure of washer gun fitting is up to 4500 PSI and working temperature is up to 250 °F, suitable for hot and cold water. Pressure washer fitting is made of high quality stainless steel, resistance to corrosion and long life using. Max Flow Rate: 30.0 GPM..
  • 【Application】 Suitable for connect swivel fitting between gun and hose, Swivel fitting rotates freely, reduces the strain on your wrist when using the pressure washer..
  • 【Quality Warranty】 The stainless steel pressure washer swivel joint for your pressure washer gun and hose. We did 100% inspection before goods leave our factory, if you have any problem with these products, we will 100% refund to you or replace a new set for you..
Check Stock

BELEY Heavy Duty Ball Joint Separator Tool Tie Rod Ends Remover with Sizes Forks 22mm 24mm 27mm 31mm 36mm and Adjustable Jaw Range (30mm~56 mm)

  • Efficient Removal Ball Joint -- Heavy-duty tie rod and ball joint separators can quickly and easily disassemble the ball joint connection, disassemble the tie rod end, steering knuckle and lower control arm to replace the ball joint. Separate the stubborn joints on most compact cars without damaging the ball joint shoes..
  • Application -- Heavy-duty tie rods and ball joint separators are compatible with BMW E38, E39, E52, E60, E61, E70, E83, E90, E91, E92, R50, R52, R53, RR1, RR2, X5. Compatible with Mercedes-Benz W211, W219, W220 and W230. Compatible with Porsche 996 Carrera. Compatible with Audi A4 and A6..
  • Heavy Duty Design -- The separator is made of heavy-duty carbon steel, with high strength, high hardness, thick and durable, and can withstand a large amount of potential energy without breaking, ensuring that the ball joint and rubber parts will not be damaged. Add a little oil to the screw before use to make the ball joint easier to eject from the steering knuckle and better protect the thread..
  • Adjustable Jaws -- The jaw capacity range can be adjusted (30 ~ 56mm/1.18 ~ 1.96inch), and can be adjusted to a suitable....
Check Stock

Barco Sin Timón (Plena)

  • 【COMPLETE ACCESSORIES】It comes with 13.5" Steering Wheel, Swivel Helmet, Standard 3/4" Tapered Steering Axle.
  • 16ft Steering Cable, Hardware, 90 Degree Bezel Kit..
  • 【High Quality Material】The steering kit is made of cast steel and 304 stainless steel seamless tube and corrosion resistant material, which is durable and stable. The rotary rudder is well welded, well polished, and of good size. The cables are made of stainless steel and high-quality rubber to ensure the surface is free from corrosion, rust, cracks and leaks and to keep the accessories shiny. Flat interface design, better and stronger marine steering system kit..
  • 【Easy To Install】The marine steering kit is easy to assemble, you don't have to configure the parts separately, it can be adjusted according to your needs..
  • 【Easy Operation】This rudder system is designed to minimize your effort to drive the boat and make the boat turn accurately to ensure you have a pleasant boating experience every time you use it..
  • 【Wide Application】Specially designed and developed for marine use. This outboard steering kit is suitable for mechanical/manual steering of yachts, fishing boats, electric push boats and other water vehicles..
Check Stock