Categories

Best Step Motors Driver

FYSETC 3D Printer Parts Stepstick Mute TMC2209 V3.1 Stepper Motor Driver UART Mode with Heatsink for Reprap Ram1.4 MKS Gen/SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 Control Motherboard-5Pcs

  • TMC2209 V3.1: ultra-silent motor driver, 2020 New Version, compatible to a number of legacy drivers as well as to the TMC2208, Support UART mode, compatible with popular motherboards such as FYSETC S6/F6, MKS SGENL, MKS GENL v2.0, MKS Robin E3D, SKRv1.3/1.4. Heat sink color is random: Blue or Black..
  • Upgrade Tips: add CLK pin, not connect in default, tie to GND via 0R.
  • SPREAD pin is floating. Reserve pull-up and pull-down resistors. Move TX from 3 to 5..
  • Advantage 1: StallGuard for sensorless homing. The integrated power MOSFETs handle motor currents up to 2A RMS with protection and diagnostic features for robust and reliable operation. A simple to use UART interface opens up tuning and control options. Store application tuning to OTP memory..
  • Advantage 2: Industries’ most advanced STEP/DIR stepper motor driver family upgrades designs to noiseless and most precise operation for cost-effective and highly competitive solutions..
  • Advantage 3: Step/Dir Drivers for Two-Phase Bipolar Stepper Motors up to 2.8A peak –StealthChop for Quiet Movement – UART Interface Option –Sensorless Stall Detection StallGuard4..
Check Stock

BOSCH GXL18V-238B25 18V 2-Tool Combo Kit with Connected-Ready 1/4 In. Hex Impact Driver, Connected-Ready Compact Tough 1/2 In. Drill/Driver and (2) CORE18V 4.0 Ah Batteries

  • Compact power 18V combo kit – includes two tools (impact driver and drill) for power, with two CORE18V 4.0 Ah batteries.
  • Powerful impact driver design – features a 1/4 In. hex, an efficient EC Brushless motor and variable-speed trigger.
  • Compact CORE18V 4.0 Ah Li-ion battery – engineered to provide next-gen power and runtime, while losing the weight, for optimized performance-to-weight ratio.
  • Next-gen drill/driver – engineered with Bluetooth connectivity (with optional Connected Tool Module), KickBack Control and more.
  • Powerful EC Brushless motors – both impact driver and drill/driver have EC Brushless motors for superior efficiency.
Check Stock

HiLetgo L298P DC Motor Drive Module L298P DC Motor Drive Shield H-Bridge Drive Expansion Board High-Power DC Stepper Motor Controller for Arduino

  • Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input..
  • The L298P shield DC motor driver has PWM speed control mode.
  • Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A..
  • Stack design can be directly plugged into the Arduino, easier to use..
Check Stock

Eiechip® CNC 3D Printer Kit for Arduino Mega 2560 R3 + RAMPS 1.4 Controller + LCD 2004 + 6X Limit Switch Endstop + 5 A4988 Stepper Driver 3D Printer Interface & Driver Modules

  • 3D Printer Accessories Set meets most needs. Including CNC Shield V3.0, UNO R3 Board, A4988 StepStick Stepper Motor Module..
  • The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers..
  • It has in total 4 channel slots for A4988 stepper motor driver modules for driving 4 channel of stepper motors..
  • Each channel of stepper motor only needs 2 IO ports, which means 8 IO ports is sufficient to manage 3 stepper motors..
  • This shield can make quick work for managing stepper motors in your project..
Check Stock

Bosch GXL18V-233B25 18V 2-Tool Combo Kit with 1/2 In Hammer Drill/Driver Freak 1/4 In and 1/2 In Two-in-One Bit/Socket Impact Driver and 2 CORE18V 4.0 Ah Compact Batteries

  • Brushless 18V combo kit – includes two tools (impact driver and hammer drill) for power, with two CORE18V 4. 0 Ah batteries.
  • Half driver, half wrench Freak – features a 1/4 In. quick-change hex shank and a 1/2 In. square drive, for either bits or sockets.
  • Powerful hammer drill/driver design – made with a brushless motor to deliver runtime and power for tough applications.
  • CORE18V battery – provides next-gen Li-ion 21700 cell technology in a lightweight, high-power battery with all-day performance.
  • Powerful EC Brushless motors – both impact driver and hammer drill have EC Brushless motors for superior efficiency.
Check Stock

PXN-2119Pro flight simulator controls Flight Stick PC Joystick with Vibration Flight Simulator Stick for PS4/XBOX S/X /Windows XP/VISTA/7/8/10（NOT Support Mac Systems/PS5 XBOX ONE/360）

  • 1.【Product features】PXN-2119Pro Game Flight Joystick is composed of "rocker arm unit" and "throttle valve" ,Simulate the throttle rudder, simulate....
  • 2.【Compatibility】Compatible with multiple platforms, compatible systems for PS4/XBOX S/X /XBOX SERIES X/S/PC Windos XP / 7/8/10, Compatible with....
  • 3. 【PC Connection Method】Step 1 Launch PXN official website (e-pxn) to download and install driver,details show below:Home--support--tools--find....
  • 4. 【PS4 / XBOX S/X Connection Method】PS4 /XBOX S/X Step 1 Plug the throttle into joystick, then plug the PS4 original controller into guidance....
  • 5.【Ergonomic design】 in line with ergonomic design, built-in motors, enable the game to realize the rocker, as well as motor switching.
Check Stock

Stepper Motor HAT for Raspberry Pi,Jetson Nano Onboard Dual DRV8825 Motor Controller Built-in Microstepping Indexer Drives Two Stepper Motors Up to 1/32 Microstepping 5V 2.5A

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Protection features: Overcurrent Protection (OCP), Thermal Shutdown (TSD), VM Undervoltage Lockout (UVLO).
  • Integrates 5V regulator, allows providing power to Raspberry Pi.
  • 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
  • Adjustable motor drive current via potentiometer, maximum 2.5A current output.
  • Onboard dual DRV8825 motor controller IC with built-in microstepping indexer, drives two stepper motors, easy to use.
  • Onboard multi connector options for stepper motors in different specifications.
Check Stock

Kiro&Seeu L293D DC Motor Drive Shield Stepper Motor Drive Shield Expansion Board Compatible with Arduino Duemilanove Raspberry Pi

  • This is a commonly used DC motor drive module, using a small current 293 chip DC motor driver chip..
  • Using this chip you can use DC motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel..
  • Tested compatible for Arduino Mega, Diecimila & Duemilanove..
  • 2 interface for 5V Servo connected to the Arduino's high-resolution dedicated timer - no jitter..
  • Multi-function, easy to operate, a strong driver library support and feature updates..
Check Stock

MKS GEN L V1.0 Controller Board 3D Printer Kit Mainboard Ramps1.4 Dual Extruder Touch for 3D Printer Accessories

  • Support a Variety of Stepper Drivers -- 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like..
  • Reserve External Driver Signal -- available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t..
  • Use CH340 Serial Port Chip -- Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2..
  • Support 24V Input -- The heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run Marlin firmware, the configuration is completely same as Ramps 1.4..
  • Compatible With -- Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire..
Check Stock

6Pcs L298N Motor Drive Controller Board DC Dual H-Bridge Stepper Motor Control and Drives Module for Arduino Micro:bit Smart Car Robot UNO MEGA R3 Mega2560

  • ★L298N as main driver chip makes strong driving ability and strong anti-interference,dual-channel h-bridge driver working mode creates higher working efficiency,,drive stepper dc motors to work.to avoid damage the voltage stabilizing chip, please use an external 5v logic supply when using more than 12v.
  • ★Dual-channel H-bridge driver working mode creates higher working efficiency..
  • ★To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • ★Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • ★L298N as main chip. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
Check Stock

DEVMO 5pcs DRV8825 Stepper Motor Driver Module with Mini Heat Sink for 3D Printer Accessories Compatible with RepRap 4 RAMPS 1.4 StepStick

  • ★The DRV8825 stepper motor driver carrier board TI DRV8825 micro bipolar stepper motor drive is a breakthrough..
  • ★Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step..
  • ★Simple step and direction control interface..
Check Stock

Monoprice Mini Delta v2 3D Printer 110 x 120mm Heated Build Plate PoloPrint Pro Wi-Fi Auto Resume Advanced Gcode Auto Leveling Open Source Works with PLA & ABS

  • Touchscreen Control, Updated Firmware and UI: You spoke and we listened. Larger icons, clear and concise instructions, and overall quality of life....
  • Fully assembled: the mp mini delta 3D printer comes fully assembled, ready to print out of the box.
  • PoloPrint Pro Wi-Fi Connection: Connect to the printer over Wi Fi using the updated PoloPrint Pro app for iOS or Android..
  • Open Source Friendly Cura Compatibility: The industry standard firmware is great for people who want to tinker. The printer is compatible with Cura....
  • Quiet Driver Motors: Thanks to quieter driver motors, the Mini Delta V2 operates at a whisper quiet 30dBA, which is considerably quieter than the....
Check Stock

748-131 Front Left Driver Side Power Window Regulator with Motor Compatible with 2003-2010 Honda Element

  • 【Compatible】This Front LH Driver Side Window Regulator fits 2003 2004 2005 2006 2007 2008 2009 2010 Honda Element, 6 Pin Connector. To make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.
  • 【Interchange Part Number】748-131, 72250SCVA02. Placement on Vehicle: Front Left Driver Side..
  • 【Rigorously Tested】Ameetaa window regulators and motors are tested by cycling them up and down thousands of times in an actual vehicle door to ensure long service life.
  • 【Easy installation】6 Pins Terminal Connector for Directly Plug & Play. No Wire Splicing Necessary.
  • 【Package Included】1 x Front Driver Side Power Window Regulator with Motor Assembly.
Check Stock