Categories

Best Stepper Motor Cable

Twotrees Nema17 Stepper Motor 4 Lead Stepper Motor Nema 17 Motor with 1m Cable 42BYGH 38MM 1.5A 17HS4401S for CNC XYZ 3D Printer

  • High Torque: Twotrees stepper motor Adopting high quality motor steel material, is provided with high torque (42Ncm(60oz.in) ), low self-inductance....
  • Low Resistance: Twotrees stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably....
  • Wide Application: This small stepper motors can be used in various area, such as 3D printer.
  • Excellent Service : CE certified：Each nema 17 stepper motor has undergone a rigorous quality control ex works, can carry out a 24-month quality....
  • What Do You Get: The package includes 1* 38mm Stepper Motor/1pcs 1m 4pins cable and connector (Size: 42mm X 42mm X 38mm/1.65''x1.65''x1.49'' ,NEMA 17....
Check Stock

MybotOnline 5 Sets Stepper Motor 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board

  • Stepper motor with a standard interface, motor diameter: 1.1", wire length: 9.05".
  • A, B, C, D four-phase LED indicates the status of stepper motor work.
  • Compatible with ArduinoIDE UNOR3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.
  • Gift: 1x 10-pin male to female multicolor breadboard jumper wires，each cable length: 7.87"(20 cm).
  • Packing in a box: 5 sets Uln2003 stepper motor + driver board + 10 pin jumper wire.
Check Stock

Creality 3D Printer Original Stepper Motor 42-40/1pcs and 42-34/3pcs 2 Phase 0.8A 1.8 Degree 0.4N.M for Most FDM Printer CNC Accessory Replacement 4pcs/Pack

  • 【Widly Compatible】 42-34 Stepper motor apply for 3D printer Ender 3 S1, Ender 3 S1 Plus, Ender 3 S1 Pro (like CR-10 Series Z axis or Ender-3 X/Y/Z....
  • 【Low noise motor】The Creality high quality motor with low power, uniform speed,stableperformance, low noise and no step to lose during the....
  • 【High quality stepper motor】Stepper motor with low noise and efficient heat dissipationhas the large torque and high precision without losing....
  • 【Precise rotation】With high-strength synchronous wheel andsynchronous gear, it realizes accurate constant ratio,uniform revolution and high....
  • 【What You Get】The package include 42-40 motor 1pcs and 42-34 motor 3pcs,this item does not include connecting cable.If need further please fell....
Check Stock

Creality 3D Printer 42-40 Stepper Motor 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder Compatible with E-axis of CR-10 Series and Ender-3 Series

  • Compatible: The stepper motor 42-40 applies to Eixe series Ender and CR-10 (e.g. Ender-3 / Ender 3 Pro / CR 10 / CR 10S etc.)..
  • 1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase..
  • High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which....
  • Low noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step..
  • What You Get: 1x 42-40 Stepper Motor (Note: This item does not include a connection cable or screws.).
Check Stock

Stepper Motor Mounting Bracket, 6pcs Steel Motor Mounting Nema17 Bracket, with Mounting Screws

  • Mounts are thick 2mm metal bent into an L shape. spot-welded 2 little triangle-shaped wedges in the corners. Ideal for replacement applications..
  • Stepper motor bracket durable alloy steel provides strong bearing pressure when printing..
  • Nema17 brackets are 2 long slots so you could easily loosen screws, tighten the belt tension of the motor and belt, and tighten them back down easily..
  • Stepper motor alloy steel mounting bracket can match standard Nema 17 stepper motor, and also include the mounting holes for Nema 17 economy planetary geared stepper motor but not for high precision planetary geared stepper motor..
  • 6 pcs of NEMA 7 stepper motor mounting brackets, 90 degrees L-shaped bracket there are 4 holes drilled to mount for 3D Printer Motors Nema 17 Stepper Motor 42-40 Motor..
Check Stock

MELIFE 3D Printer Controller Kit RepRap, RAMPS 1.4 + Mega 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display 3D Printer Controller Kit for RepRap.

  • The Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one.RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion..
  • The Mega2560 is an ATmega2560 as core microcontroller,development board itself has 54 groups digital I / O With the bootloader, download the program directly via USB without having to go through other external writer..
  • Large screen 12864LCD integration for SD card in the back, after slicing the file into the for SD card, you can select the corresponding files on the LCD.The board has encoder, can be achieved parameter adjustment, and the file selection print!The ramps can be Plug-and-Play, but it need to modify the firmware to support..
  • A4988 Stepper Motor Driver can adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated..
  • Packing List:RAMPS 1.4*1+Mega 2560 R3 with cable *1+A4988 Stepper Motor Driver*5+Heat sink*5+LCD control screen+cable*1.
Check Stock

Eiechip® CNC 3D Printer Kit for Arduino Mega 2560 R3 + RAMPS 1.4 Controller + LCD 2004 + 6X Limit Switch Endstop + 5 A4988 Stepper Driver 3D Printer Interface & Driver Modules

  • 3D Printer Accessories Set meets most needs. Including CNC Shield V3.0, UNO R3 Board, A4988 StepStick Stepper Motor Module..
  • The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers..
  • It has in total 4 channel slots for A4988 stepper motor driver modules for driving 4 channel of stepper motors..
  • Each channel of stepper motor only needs 2 IO ports, which means 8 IO ports is sufficient to manage 3 stepper motors..
  • This shield can make quick work for managing stepper motors in your project..
Check Stock

CenryKay 5pcs ULN2003 28BYJ-48 4-Phase Stepper Motor with 5V Drive Board and 10pcs Dupont Wire Male to Female Breadboard Jumper Wires Compatible with Arduino

  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
  • The motor is gear-reduced, the noise is extremely low, and it can be driven with 5V running smoothly..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board+Dupont Wire ..
Check Stock

X27 168 Stepper Motor Kit, Instrument Cluster Gauge Repair Kit Compatible with 03-06 GM Chevy Silverado (35 Led Light Bulbs+7 Motors+Soldering Iron+Solder Sucker+Remove Tool+Flux Rosin Core Solder)

  • COMPATIBILITY - Instrument Cluster Gauge Stepper Motor Repair Kit Compatible with 03-06 GM Chevy Silverados Tahoes Yukons. The instrument cluster repair kit perfectly replacement for the XC5-168, X15-168 ,X25-168 and X27-168 that are in your gauge cluster for 2003 2004 2005 2006 GM GMC Chevy Silverado Trailblazer. Came in your vehicles, Please check whether this X27 168 Stepper Motor Kit fits your vehicles before buying.
  • APPLIED TO - The latest stepper motor, direct replacement for the older and faulty stepper motors. Used for the repair of the speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or fuel gauge. These gauge cluster repair kit have been redesigned for maximum reliability and quiet operation. Insert the needle as long as you pay attention to the zero pressure can be pressed, remember not to edge pressure.
  • FIX GLITCHES - High-quality motors that meet strict international quality standards to fix common problems caused by stepper motor of your vehicles: gauges dead, chatter, sticking, false / jumpy / inaccurate readings, pegged out to the left or right of the dial, ratchet up or down, sticky needle movement, erratic gauge movement etc. Each gauge of your instrument cluster ....
Check Stock

6 PCS 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • ❃❃ The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable..
  • ❃❃ Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in).
  • ❃❃ A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • ❃❃ 5 line 4 phase can be used for ordinary ULN2003 chip driver, Connect to the 2 phase, Support the development board, With convenient use, direct docking..
  • ❃❃ Great packing in a box : 6 PCS ULN2003 Stepper Motor + Driver Board (with a little gift)..
Check Stock

Nema17 42 Stepper Motor 40mm 64oz.in 45Ncm 1.7A 1.8 Degree 2phase with 1M 4-pin Cable& Connector for 3D Printer Hobby CNC Router Engraving Milling Machine 17HS4401J

  • It with 1.8°± 5%step angle (200 steps/revolution) Phase:2.
  • Product Dimensions: 1.6 x 1.5 x 1.6 inches.
Check Stock

FYSETC Ender 3 S1 3D Printer Stepper Motor 42-40 Nema 17 Ender 3 CR6 SE Extruder Motor 2 Phase 1A 1.8 Degree with 39.3in Connecting Cable Compatible with Ender 3 Pro V2 Ender 5 Pro Plus CR-10 E-axis

  • Motor Model: 42-40 Nema 17, widely work for Most 3D Printer Reprap Ender 3 CR-10. It fits for the E-axis of Crealit Ender series and the CR series,....
  • High torque -Holding torque up to 0.45Nm. Low noise, have better high speed performance..
  • Size: 42mm X 42mm X 40mm. 2 Phase 4 Wires, with 39.3 in/ 1 Meter cable..
  • With the stepper motor, you will find it easy to solve the problems of uneven extrusion, regularly plugging and material reloading. The line sequence....
  • Package Includes: 1 x 42-40 Nema 17 Stepper Motor.
Check Stock

3Pcs Nema23 Stepper Motor Mount 57 Stepping Motor Mounts Mounting Base Plastic Bracket Clamp Support Holder Fixed Seat for CNC Router Milling Engraving Machine DIY Acessories

  • 【Usage】for Nema23 Stepper Motor Bracket/57 stepper motor.
  • 【size】 57*57*40cm【Material】Plastic.
  • 【Package Includes】3pcs 57 Stepper Motor Mounting Bracket.
  • 【Precise Hold-cutting】This motor mount bracket owns convenient mounting holes. These holes is cut by puncher, perfect matched with the 57 stepper motor..
Check Stock