Categories

Best Stepper Motor For 3d Printer

42 Motor 1.5A 17HS4401S with TB6600 Stepper Motor Driver NEMA17 23 for CNC and 3D Printer

  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible....
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great....
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of....
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum),....
  • ★ Good after-sales service. We'll respond within 24 hours for any questions..
Check Stock

Happybuy Linear Rail 3 Ballscrew RM1605-350mm 650mm 1050mm Linear Rail Support 12 CNC Kit Linear Shaft Optical Axis

  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible....
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great....
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of....
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum),....
  • ★ Good after-sales service. We'll respond within 24 hours for any questions..
Check Stock

Zrong 3D Printer Parts DRV 8825 DRV8825 Stepper Motor Driver Module 4 PCB Board Replace A4988

  • The DRV8825 stepper motor driver is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver..
  • The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a....
  • The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). It....
Check Stock

Twotrees Nema17 Stepper Motor 4 Lead Stepper Motor Nema 17 Motor with 1m Cable 42BYGH 38MM 1.5A 17HS4401S for CNC XYZ 3D Printer

  • High Torque: Twotrees stepper motor Adopting high quality motor steel material, is provided with high torque (42Ncm(60oz.in) ), low self-inductance....
  • Low Resistance: Twotrees stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably....
  • Wide Application: This small stepper motors can be used in various area, such as 3D printer.
  • Excellent Service : CE certified：Each nema 17 stepper motor has undergone a rigorous quality control ex works, can carry out a 24-month quality....
  • What Do You Get: The package includes 1* 38mm Stepper Motor/1pcs 1m 4pins cable and connector (Size: 42mm X 42mm X 38mm/1.65''x1.65''x1.49'' ,NEMA 17....
Check Stock

Easycargo 4pcs 40mm Heatsink 40mmx40mmx20mm Aluminum Heatsink Kit Cooling Heat Sink for 3D Printer Stepper Motor NEMA 17 TEC1-12706 Peltier Thermoelectric Cooler Module LED 40x40x20mm Silvertone

  • Includes 4 pieces 40mm aluminum heatsink..
  • Dimension: 1.57"x1.57"x0.79" / 40x40x20mm.
  • Can be applied for passive cooling 3D printer stepper motor, TEC1-12706 Thermoelectric module, NEMA17, LED etc.
  • 3D printer stepper motor, TEC1-12706 Peltier Thermoelectric Cooler Module Not Included..
Check Stock

BIGTREETECH TMC2208 V3.0 UART Mode Stepper Motor Driver 3D Printer Parts 4 PCS

  • The TL-Smoother is an addon module for 3D printer stepper motor drivers.
  • Lower vibration lower noise smoother result.
  • The board provides flyback diodes (freewheeling diodes) for the motor outputs.
  • Also protected against induction voltages in the unpowered state of the driver.
  • You will got smoother movement especially on the delta-style 3Dprinter under DVR8825 stepper drivers and A4988/2 drivers.
Check Stock

Creality 3D Printer Original Stepper Motor 42-40/1pcs and 42-34/3pcs 2 Phase 0.8A 1.8 Degree 0.4N.M for Most FDM Printer CNC Accessory Replacement 4pcs/Pack

  • 【Widly Compatible】 42-34 Stepper motor apply for 3D printer Ender 3 S1, Ender 3 S1 Plus, Ender 3 S1 Pro (like CR-10 Series Z axis or Ender-3 X/Y/Z....
  • 【Low noise motor】The Creality high quality motor with low power, uniform speed,stableperformance, low noise and no step to lose during the....
  • 【High quality stepper motor】Stepper motor with low noise and efficient heat dissipationhas the large torque and high precision without losing....
  • 【Precise rotation】With high-strength synchronous wheel andsynchronous gear, it realizes accurate constant ratio,uniform revolution and high....
  • 【What You Get】The package include 42-40 motor 1pcs and 42-34 motor 3pcs,this item does not include connecting cable.If need further please fell....
Check Stock

Stepper Motor HAT Drives Two Stepper Motors Up to 1/32 Microstepping for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B for Use 3D Printer etc @XYGStudy

  • This Stepper Motor HAT gives your Raspberry Pi the ability to drives two stepper motors at the same time, supports up to 1/32 microstepping..
  • Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later versions, Jetson Nano.
  • 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
  • Applications: 3D Printer, Sculpturing machine, Mechanical arm.
Check Stock

TPU Flexible Short Range Extruder with Eccentric Wheel Flexion Retrofit Extruder Kit for 3D Printers TPU Prints

  • Compatible with Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer. Supporting all 1.75mm diameter filament especially for flexible filament such as TPU, PLA and other flexible filaments..
  • Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble..
  • Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament..
  • Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment.
  • an Integrated structure is convenient for wiring and replacing..
  • 3D Printer Direct Extruder Upgrade kit Easy Print TPU Flexible Filament.
Check Stock

300mm 8mm T8 Lead Screw Set Lead Screw+ Copper Nut + Coupler+Hexagon Wrench + Pillow Bearing Block for 3D Printer

  • Lead Screw Set, compact, large load carrying capability, rustproof and long service life..
  • Precise and accurate linear motion, large mechanical advantage..
  • T8 brass nut, with 4 holes for fixing to the machine..
  • Smooth, quiet, low friction,and low maintenance, very suitable for 3D printer z axis..
  • Widely used in 3D Printer, stepper motor, machine tools, and other equipment..
Check Stock

Ultimachine RAMBo 1.3 3D Printer Controller Kit

  • A preconfigured firmware is preloaded onto the board..
  • Stepper Drivers: 5x integrated 1/16th microstep motor drivers.
  • Digital trimpot motor control (no tiny knobs to tweak).
  • This RAMBo 1.3 Kit is complete and is made by Ultimachine.
Check Stock

Creality Ender 3 Direct Drive Upgrade Kit, Ender 3 Pro/Ender 3 V2 Direct Drive Extruder with 42-40 Stepper Motor, Hot End Kit, Fan and Cables, Support BL Touch

  • Upgraded 3d printer extruder for Ender 3, Ender 3 Pro and Ender 3 V2 3D Printer. Customer Services: If you have any question or need technical support about the product, Please press "Ask a question" through our storefront's page, report an issue through the ”Your Orders“page. We will respond with 24 hours..
  • Support all 1.75mm diameter filament in the market, offers more precise and smoother extrusion..
  • Perfect for PLA and optimize the performance of remote printing with TPU and other flexible filaments..
  • Comes with 42-40 stepper motor. This direct extruder kit is made of aluminum alloy and plastic, durable and wear resistant..
  • With longer Extruder motor connecting cable, tools, accessories and wiring diagram instruction for installation, easy to assemble..
Check Stock

FYSETC Ender 3 S1 3D Printer Stepper Motor 42-40 Nema 17 Ender 3 CR6 SE Extruder Motor 2 Phase 1A 1.8 Degree with 39.3in Connecting Cable Compatible with Ender 3 Pro V2 Ender 5 Pro Plus CR-10 E-axis

  • Motor Model: 42-40 Nema 17, widely work for Most 3D Printer Reprap Ender 3 CR-10. It fits for the E-axis of Crealit Ender series and the CR series,....
  • High torque -Holding torque up to 0.45Nm. Low noise, have better high speed performance..
  • Size: 42mm X 42mm X 40mm. 2 Phase 4 Wires, with 39.3 in/ 1 Meter cable..
  • With the stepper motor, you will find it easy to solve the problems of uneven extrusion, regularly plugging and material reloading. The line sequence....
  • Package Includes: 1 x 42-40 Nema 17 Stepper Motor.
Check Stock