Categories

Best Stepper Motor Servo Board

Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board with ArduinoIDE (no Wire)

  • 5pcs Stepper motor and driver board compatible with 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface. A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Motor diameter: 1.1 inches.Wire length：9.05 inchs. Stepping angle: 5.625 x 1/64.Reduction ratio: 1/6.Drive Module Board Size:1.26 inchsX1.38inchs. Cable length: about 20cm /8-inch..
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board..
Check Stock

Eiechip® CNC 3D Printer Kit for Arduino Mega 2560 R3 + RAMPS 1.4 Controller + LCD 2004 + 6X Limit Switch Endstop + 5 A4988 Stepper Driver 3D Printer Interface & Driver Modules

  • 3D Printer Accessories Set meets most needs. Including CNC Shield V3.0, UNO R3 Board, A4988 StepStick Stepper Motor Module..
  • The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers..
  • It has in total 4 channel slots for A4988 stepper motor driver modules for driving 4 channel of stepper motors..
  • Each channel of stepper motor only needs 2 IO ports, which means 8 IO ports is sufficient to manage 3 stepper motors..
  • This shield can make quick work for managing stepper motors in your project..
Check Stock

GeeekPi 5 Pack Geared Stepper Motor 28BYJ-48 5V Stepper Motor + Uln2003 Motor Driver Board + Dupont Wire Jumper Wires Ribbon Cables Compatible with Arduino

  • 5pcs Stepper motor and driver board compatible with arduinoIDE 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface could be connected with Driver Board easily.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, with convenient use, direct docking..
  • Package Includes:5 x Stepper Motor,5 x ULN2003AN Driver Board,30 x Female-to-female jump wire.
Check Stock

CenryKay 5pcs ULN2003 28BYJ-48 4-Phase Stepper Motor with 5V Drive Board and 10pcs Dupont Wire Male to Female Breadboard Jumper Wires Compatible with Arduino

  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
  • The motor is gear-reduced, the noise is extremely low, and it can be driven with 5V running smoothly..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board+Dupont Wire ..
Check Stock

KOOKYE 2 x 28BYJ-48 DC 5V Stepper Motor + ULN2003 Driver Test Module Board for Arduino Raspberry Pi

  • This is a stepper motor and a stepper motor driver..
  • Mainly used in air conditioner louver, small cooling and heating fan etc. Stable and all technic parameters are qualified for national electronic....
  • On-board ULN2003A chipset,On-board 4-way indicator light,On-board XH-5P socket,Compatible with Arduino..
Check Stock

DGZZI 2Set 28BYJ-48 DC 5V Geared Stepper Motor + ULN2003 Driver Test Module Board for Arduino

  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
  • 5 line 4 phase can be used for ordinary..
  • ULN2003 chip driver, connect to the 2 phase, support the development board, With convenient use, direct docking..
  • Package includes: 2* 28BYJ-48 Stepper Motor + 2* Uln2003 Driver Board.
Check Stock

3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

  • ♞【Product】3 Axis nema23 stepper motor driver usbcnc controller kit.
  • ♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 425oz-in,280Ncm / Motor Size:57x57x112mm / Phase:2 / 4pcs lead wire / 1.8 Step.
  • ♞【Stepper Motor Driver】FMD2740C Stepper Motor Driver / 4Amps / Support voltages:12 to 50V DC / 128microstep.
  • ♞【4 Axis USBCNC breakout board】 Come with Hand Control with USB Cable / Only support USBCNC software / input voltage: 15-36V DC..
  • ♞【DC Power Supply】400W 36V 11A DC Switching power supply.
Check Stock

6.35x6.35mm CNC Flexible Coupling Motor Shaft Coupler 1/4\ to 1/4\ Shaft

  • Shaft: 6.35mm x 6.35mm,Length: 25mm,Diameter: 20mm.
  • it is widely used to connect servo motor, stepper motor, encoder, screw driving, machine platform, etc..
Check Stock

diymore 5-Set DC12V 28BYJ-48 Stepper Motor with ULN2003 Drive Boards Blue(12V)

  • Stepper motor driver board with ULN2003..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
Check Stock

uxcell 8mmx10mm Clamp Tight Motor Shaft 2 Diaphragm Coupling Coupler

  • Clamp-style mount for secure attachment to shaft.
  • Accommodates angular, parallel misalignment.
  • Aluminum hubs for light weight, stainless steel discs for strength.
  • Shaft couplers suitable for connect servo motor, stepper motor, encoder, screw driving, machine platform, etc..
Check Stock

uxcell 12mmx12mm Clamp Tight Motor Shaft 2 Diaphragm Coupling Coupler

  • Clamp-style mount for secure attachment to shaft.
  • Accommodates angular, axial and parallel misalignment.
  • Aluminum hubs for light weight, stainless steel discs for strength.
  • Shaft couplers suitable for connect servo motor, stepper motor, encoder, screw driving, machine platform, etc..
Check Stock

uxcell 16mmx19mm Clamp Tight Motor Shaft 2 Diaphragm Coupling Coupler

  • Clamp-style mount for secure attachment to shaft.
  • Accommodates angular, axial and parallel misalignment.
  • Aluminum hubs for light weight, stainless steel discs for strength.
  • Shaft couplers suitable for connect servo motor, stepper motor, encoder, screw driving, machine platform, etc..
Check Stock

MybotOnline 5 Sets Stepper Motor 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board

  • Stepper motor with a standard interface, motor diameter: 1.1", wire length: 9.05".
  • A, B, C, D four-phase LED indicates the status of stepper motor work.
  • Compatible with ArduinoIDE UNOR3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.
  • Gift: 1x 10-pin male to female multicolor breadboard jumper wires，each cable length: 7.87"(20 cm).
  • Packing in a box: 5 sets Uln2003 stepper motor + driver board + 10 pin jumper wire.
Check Stock