Categories

Best Stepper Motors And Drivers

3D Printer Configuring Drivers

  • In this appendix, I described the process of configuring 3-way drivers for stepper motors in a 3D printer. I myself encountered overheating of the....
Check Stock

X27 168 Stepper Motor Kit, Instrument Cluster Gauge Repair Kit Compatible with 03-06 GM Chevy Silverado (35 Led Light Bulbs+7 Motors+Soldering Iron+Solder Sucker+Remove Tool+Flux Rosin Core Solder)

  • COMPATIBILITY - Instrument Cluster Gauge Stepper Motor Repair Kit Compatible with 03-06 GM Chevy Silverados Tahoes Yukons. The instrument cluster repair kit perfectly replacement for the XC5-168, X15-168 ,X25-168 and X27-168 that are in your gauge cluster for 2003 2004 2005 2006 GM GMC Chevy Silverado Trailblazer. Came in your vehicles, Please check whether this X27 168 Stepper Motor Kit fits your vehicles before buying.
  • APPLIED TO - The latest stepper motor, direct replacement for the older and faulty stepper motors. Used for the repair of the speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or fuel gauge. These gauge cluster repair kit have been redesigned for maximum reliability and quiet operation. Insert the needle as long as you pay attention to the zero pressure can be pressed, remember not to edge pressure.
  • FIX GLITCHES - High-quality motors that meet strict international quality standards to fix common problems caused by stepper motor of your vehicles: gauges dead, chatter, sticking, false / jumpy / inaccurate readings, pegged out to the left or right of the dial, ratchet up or down, sticky needle movement, erratic gauge movement etc. Each gauge of your instrument cluster ....
Check Stock

Twotrees Nema17 Stepper Motor 4 Lead Stepper Motor Nema 17 Motor with 1m Cable 42BYGH 38MM 1.5A 17HS4401S for CNC XYZ 3D Printer

  • High Torque: Twotrees stepper motor Adopting high quality motor steel material, is provided with high torque (42Ncm(60oz.in) ), low self-inductance....
  • Low Resistance: Twotrees stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably....
  • Wide Application: This small stepper motors can be used in various area, such as 3D printer.
  • Excellent Service : CE certified：Each nema 17 stepper motor has undergone a rigorous quality control ex works, can carry out a 24-month quality....
  • What Do You Get: The package includes 1* 38mm Stepper Motor/1pcs 1m 4pins cable and connector (Size: 42mm X 42mm X 38mm/1.65''x1.65''x1.49'' ,NEMA 17....
Check Stock

FYSETC 3D Printer Parts Stepstick Mute TMC2209 V3.1 Stepper Motor Driver UART Mode with Heatsink for Reprap Ram1.4 MKS Gen/SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 Control Motherboard-5Pcs

  • TMC2209 V3.1: ultra-silent motor driver, 2020 New Version, compatible to a number of legacy drivers as well as to the TMC2208, Support UART mode, compatible with popular motherboards such as FYSETC S6/F6, MKS SGENL, MKS GENL v2.0, MKS Robin E3D, SKRv1.3/1.4. Heat sink color is random: Blue or Black..
  • Upgrade Tips: add CLK pin, not connect in default, tie to GND via 0R.
  • SPREAD pin is floating. Reserve pull-up and pull-down resistors. Move TX from 3 to 5..
  • Advantage 1: StallGuard for sensorless homing. The integrated power MOSFETs handle motor currents up to 2A RMS with protection and diagnostic features for robust and reliable operation. A simple to use UART interface opens up tuning and control options. Store application tuning to OTP memory..
  • Advantage 2: Industries’ most advanced STEP/DIR stepper motor driver family upgrades designs to noiseless and most precise operation for cost-effective and highly competitive solutions..
  • Advantage 3: Step/Dir Drivers for Two-Phase Bipolar Stepper Motors up to 2.8A peak –StealthChop for Quiet Movement – UART Interface Option –Sensorless Stall Detection StallGuard4..
Check Stock

BIGTREETECH SKR V1.4 Turbo Control Board 32bit for 3D Printer Compatible with TFT35 E3 V3.0.1/TFT70 Touch Screen Support TMC2209/TMC2208/TMC5160/TMC2130 for Most FDM 3D Printer (with 5*TMC2209)

  • ... ✨On-board TMC-driven SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap..
  • ✨Compare to other stepper motor driver in the market, our TMC2209 silent stepper driver generate lower heat and it has a large-area cooling position to lower the temperature. It driver can lower 30% heat than others stepper motor drivers even working last for a long time. With Passive cooling on a 10 hours print, they only hit 37℃..
  • ✨BIGTREETECH TMC2209 V1.2 is an ultra-silent motor driver IC for two-phase stepper motors, which adopts stealthChop2 Mute technology which reduces motor noise to the point of silence at low velocities to ensures noiseless operation, maximum efficiency and best motor torque. spreadCycle allow for highly dynamic motion. Drive current 2A, peak current 2.8A, voltage range 4.75V-29V, 256 subdivision..
Check Stock

Dr.Roc Compatible Instrument Cluster Gauge Stepper Motor Repair Kit Fits X27 168 03 to 06 with 7 Stepper Motors Soldering Iron Solder Sucker Chevy Silverado GM GMC

  • The latest generation,Premium stepper motor,quiet operation and reliability,Perfectly Replace for the older and faulty XC5-168( XC5168 ), X15-168( X15168 ) ,X25-168 ( X25168 ) and X27-168 ( X27168 , X27.168 , X27 168 ) stepper motor that came in your vehicles,Use the tool on the upper left corner to check whether this product fits your vehicles.
  • Stepper motor is used for repairing guage cluster,including speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or fuel gauge.
  • Solve the common problems of your vehicle such as, gauges cluster dead,chatter,sticking,false/jumpy/inaccurate readings,pegged out to the left or right of the dial, ratchet up or down,sticky needle movement,erratic gauge movement etc.
  • Each gauge of your instrument cluster need one stepper motor.Since one stepper motor went out,and it will result all other stepper motors go out soon. Checking the quantity of stepper motors for your vehicle to decide to buy the 6 or 7 one.It is easy to use for upgraded adjustable soldering iron,but you’d better to search the instructions Video on Internet first,which is very helpful..
  • The premium instrument cluster repair kit is compatible with Silverado,Suburban,Traiblazer,Tahoe,Avalanc....
Check Stock

Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D

  • ...arlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly..
  • Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage..
  • Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines..
  • Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates.Use the configuration file to set the driving current mode, avoid manual....
Check Stock

Stepper Motor Mounting Bracket, 6pcs Steel Motor Mounting Nema17 Bracket, with Mounting Screws

  • Mounts are thick 2mm metal bent into an L shape. spot-welded 2 little triangle-shaped wedges in the corners. Ideal for replacement applications..
  • Stepper motor bracket durable alloy steel provides strong bearing pressure when printing..
  • Nema17 brackets are 2 long slots so you could easily loosen screws, tighten the belt tension of the motor and belt, and tighten them back down easily..
  • Stepper motor alloy steel mounting bracket can match standard Nema 17 stepper motor, and also include the mounting holes for Nema 17 economy planetary geared stepper motor but not for high precision planetary geared stepper motor..
  • 6 pcs of NEMA 7 stepper motor mounting brackets, 90 degrees L-shaped bracket there are 4 holes drilled to mount for 3D Printer Motors Nema 17 Stepper Motor 42-40 Motor..
Check Stock

AOICRIE 4PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino

  • L298N as Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects, Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient, To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled..
  • Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use..
  • Wide Usage Great for DIY Smart Car Robot Power MEGA R3 for Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits..
Check Stock

BIGTREETECH TMC2208 V3.0 UART Mode Stepper Motor Driver 3D Printer Parts 4 PCS

  • The TL-Smoother is an addon module for 3D printer stepper motor drivers.
  • Lower vibration lower noise smoother result.
  • The board provides flyback diodes (freewheeling diodes) for the motor outputs.
  • Also protected against induction voltages in the unpowered state of the driver.
  • You will got smoother movement especially on the delta-style 3Dprinter under DVR8825 stepper drivers and A4988/2 drivers.
Check Stock

18/4 AWG Shielded CNC Wire (50FT) — Flexible Stranded Shielded 18-Gauge 4-Conductor Cable for Stepper Motors, CNC Machines, NEMA Motors, VFD Spindles, CNC Routers, 3D Printers and more!

  • RESILIENT & FLEXIBLE: Stepper motor cable designed to bend smoothly in your CNC or 3D printer chain!.
  • SHIELDED 4 CONDUCTOR WIRE: Reduce interference for your CNC spindle motor or stepper motor driver!.
  • BEST RESULTS: Shielded wire means higher quality for your 3D Printer, CNC Machine or CNC Controller..
  • GREAT FOR All STEPPER MOTORS: Nema 17 Stepper Motor, Nema 23 Stepper Motor, Stepper Driver, & more!.
  • STEPPER MOTOR WIRE: The perfect upgrade to any CNC Kit, CNC Router Kit, or CNC Stepper Motor Kit..
Check Stock

Dr.Roc GM Instrument Cluster Gauge Stepper Motor Repair Kit X27 168 7 Motors,10 Backlight Bulbs,1 Remove Tool,Flux Rosin Core Solder

  • The latest generation,Premium stepper motors,quiet operation and reliability,Perfectly Replace for the older and faulty XC5-168, X15-168 ,X25-168 and....
  • Used for the repair of the speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or....
  • Each gauges of your instrument cluster need one motor,since one stepper motor went out will result all the motors go out soon. check the stepper motor....
  • It is easy to use,but you’d better to search the instructions Video on Internet first,which is very helpful.
  • Dr.Roc-Most trusted auto accessories expert,millions buyers' choice, excellent customer service with 12-month warranty.
Check Stock

6Pcs L298N Motor Drive Controller Board DC Dual H-Bridge Stepper Motor Control and Drives Module for Arduino Micro:bit Smart Car Robot UNO MEGA R3 Mega2560

  • ★L298N as main driver chip makes strong driving ability and strong anti-interference,dual-channel h-bridge driver working mode creates higher working efficiency,,drive stepper dc motors to work.to avoid damage the voltage stabilizing chip, please use an external 5v logic supply when using more than 12v.
  • ★Dual-channel H-bridge driver working mode creates higher working efficiency..
  • ★To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • ★Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • ★L298N as main chip. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
Check Stock